• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.2
• /
• pp.130-138
• /
• 2014

In this paper, the SMV 3D display method using liquid crystal shutter glass(LCSG) and SPB has been proposed. The proposed SMV display can solve the resolution degradation problem of conventional multiview displays that using based time-multiplexing method. Also, observers fatigue due to the mismatch between accommodation and vergence problem of glass-type 3D displays and conventional multiview displays, can be improved using SMV 3D display method.

• Korean Journal of Optics and Photonics
• /
• v.20 no.1
• /
• pp.23-28
• /
• 2009

In this study, we propose an image stitching method for large-area holographic photo lithography. In this method, a hologram medium become a hologram mask for lithography. And the mask has information for stitched images. These images are recorded by signal images which are controlled with DMD (digital micro-mirror device), and serial hologram recording is achieved with a motorized linear stage. Using this method, fringe seams appear on the stitching area. To remove these fringe seams, double exposure holographic lithography is tried. Each stitched image is recorded and reconstructed with a different reference beam. The experiments confirm that fringe seams are removed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6C
• /
• pp.634-641
• /
• 2009

The goal of OSIC-series detection methods is to approach the ML performance with feasible complexity. However, since they sometimes suffer from the empty vector problem, they can not achieve the soft-output ML performance or many candidate vectors are required to achieve the soft-output ML performance. In this paper, we propose the novel detection method, which can generate the reliable soft-outputs without suffering from empty vector problem. The proposed detector can approach the near soft-output ML performance as well as hard-output. Further, the complexity study shows that the proposed detection method has the lowest complexity compared to the other detectors having the near ML performance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.11
• /
• pp.1026-1033
• /
• 2004

Clipping is a simple and convenient PAPR reduction method to prevent the high-speed OFDM communication system from the nonlinear distortion. However, it inherently produces clip noise so that BER performance can be degraded. Clipping noise can be divided into in-band and out-of-band clipping noise. In this paper, we study the clipping effect on the forward link of the OFDM-FDMA system. BER performance of OFDM-FDMA system using clipping method is theoretically analyzed. We also investigate the BER performance of the clipped OFDM-FDMA signal through the HPA. From the simulation results it can be quantified how much the BER performance of OFDM-FDMA system is degraded by the clipping method. From the study results, we can choose the appropriate IBO value and CR(clip ratio) to get the desired BER performance.

• Journal of Communications and Networks
• /
• v.10 no.3
• /
• pp.316-330
• /
• 2008

This paper proposes a novel method for transporting various types of user traffic effectively over the next generation network called integrated services digital network 3 (ISDN3) (or quantum network) using quantum packets. Basically, a quantum packet comprises one or more 53-byte quanta as generated by a "quantumization" process. While connection-oriented traffic is supported by fixed-size quantum packets each with one quantum to emulate circuit switching, connectionless traffic (e.g., IP packets and active packets) is carried by variable-size quantum packets with multiple quanta to support store-and-forward switching/routing. Our aim is to provide frame-like or datagram-like services while enabling cell-based multiplexing. The quantum packet method also establishes a flexible and extensible framework that caters for future packetization needs while maintaining backward compatibility with ATM. In this paper, we discuss the design of the quantum packet method, including its format, the "quantumization" process, and support for different types of user traffic. We also present an analytical model to evaluate the consumption of network resources (or network costs) when quantum packets are employed to transfer loss-sensitive data using three different approaches: cut-through, store-and-forward and ideal. Close form mathematical expressions are obtained for some situations. In particular, in terms of network cost, we discover two interesting equivalence phenomena for the cut-through and store-and-forward approaches under certain conditions and assumptions. Furthermore, analytical and simulation results are presented to study the system behavior. Our analysis provides valuable insights into the. design of the ISDN3/quantum network.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.5
• /
• pp.32-38
• /
• 2009

FTT(Fast Fourier Transform) processor is widely used in OFDM(Orthogonal Frequency Division Multiplesing) system. Because of the increased requirement of mobility and bandwidth in the OFDM system, they need large point FTT processor. Since the size of memory which stores the twiddle factor coefficients are proportional to the N of FFT size, we propose a new method by which we can reduce the size of the coefficient memory. In the proposed method, we exploit a counter and unsigned multiplier to generate the twiddle factor indices. To verify the proposed algorithm, we design TFCGs(Twiddle Factor Coefficient Generator) for 1024pint FFTs with R2SDF(Radix-2 Single-Path Delay Feedback), $R2^3SDF,\;R2^3SDF,\;R2^4SDF$ architectures. The size of ROM is reduced to 1/8N. In the case of $R2^4SDF$ architecture, the area and the power are reduced by 57.9%, 57.5% respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.5
• /
• pp.506-514
• /
• 2008

At coverage boundaries of cellular systems including the recent WiBro standard which operate with full frequency reuse for increased spectral efficiency, interference signals from the base stations(BS) of adjacent cells degrade the receiver performance. In this paper, a detection method for multiple-antenna mobile stations(MS) is proposed for downlink performance improvement at coverage boundaries of cellular systems. For the performance verification, we obtain the probability density function(pdf) of the effective signal-to-interference and noise ratio(SINR) according to the variation of the interference signals from adjacent cells as well as the number of MS antennas, and calculate the transmission efficiency. We also verify the performance of proposed method with simulation results, to demonstrate a significant performance improvement is achieved over the maximal ratio combining(MRC) and spatial demultiplexing(SD) methods in terms of the effective SINR and the spectral efficiency.

• Journal of Advanced Navigation Technology
• /
• v.14 no.2
• /
• pp.213-219
• /
• 2010

Recently, a multi-core system is studied for single terminal's operations on various service networks for mobile systems. Therefore, it is expected that mobile systems capable of supporting WCDMA, MC-CDMA, CDMA and WiBro would be developed. Mobile systems for supporting various service networks is able to be implemented on a single chipset via SoC(System one Chip) technology, thus a noble modem design proper for SoC technology is necessary. For high speed data transmission of 4G mobile communication services, OFDM scheme has to be applied. But, an OFDM signal consists of a number of independently modulated subcarriers, and superposition of these subcarriers cause a problem that can give a large PAPR. In this paper, a noble modem design for 4G mobile communication services and PAPR reduction method for solving the PAPR problem are proposed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.6 s.360
• /
• pp.64-70
• /
• 2007

This paper presents a novel unified DC offset cancellation and I/Q regeneration for five-port junction based direct receivers. It utilizes the symmetry characteristics of the single-frequency continuous-wave (CW) signal, making it possible that the proposed method can be used regardless of carrier phase offset. The proposed method eliminates the additional DC offset cancellation and reduces the I/Q regeneration parameter estimation time. Since the proposed method employs a single-frequency CW signal independent of the modulation scheme, five-port junction based direct receivers can be used for the demodulation of orthogonal frequency-division multiplexing and continuous phase modulation as well as phase shift-keying.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.3
• /
• pp.513-519
• /
• 2018

OFDM modulation has been used for a transmission scheme in 4G LTE (Long Term Evolution) and Wi-Fi systems to mitigate the effects of frequency selective fading channels. An OFDM modulation is a block transmission scheme because an OFDM symbol consists of multiple subcarriers with narrow bandwidth. Therefore, all OFDM symbols in a frame should be filled out with data and padding bits. Depending on the amount of data, more padding bits than information bits can occupy the last OFDM symbol. Such inefficiency causes the loss of throughput. To overcome this problem, an efficiency padding method is proposed by using the property of DFT (Discrete Fourier Transform). In the proposed method, symbol duration of the last symbol is changed depending on the number used data subcarriers in the last symbol. With numerical evaluation, it is examined that throughput enhancement achieved by the proposed method can be about 20% depending a transmission scheme and data length.