• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.4
• /
• pp.223-233
• /
• 2002

The air distribution duct with multiple outlets is an essential part of automotive air-conditioning system In a bus. The estimation of airflow rate in an automotive air-conditioning duct is typically very complicate due to large variations in cross-sectional area and abrupt changes in flow direction, as well as unbalanced distribution of the flow. In this paper, the flow characteristic in a duct with multiple outlets is investigated through experiment, CFD simulation and a one-dimensional simulation. Numerical simulations have been performed for two simplified air conditioning ducts with multiple outlets used in a medium bus. The three dimensional Navier-Stokes code was used to evaluate the overall pressure, velocity Held, and distribution rate at each diffuser according to the change of various design parameters such as ratio of cross-sectional area and radius of bifurcated region. In addition, a one-dimensional program based on Bernoulli equation was developed to obtain optimized diffuser area required to equalize discharge flow rate at each outlet. As a result of this study, optimized diffuser area of design variable by one-dimensional program was very reasonable as compared to the trend deduced from CFD Simulation. Therefore, the simple and convenient one-dimensional analysis developed in this study can be applied in practical design procedure for air-conditioning duct.

• Journal of the Korea Society for Simulation
• /
• v.13 no.1
• /
• pp.41-50
• /
• 2004

The purpose of this paper is to analyse the manager's policy to maximize the profit in a multiple-server queueing facility with a limited queue capacity. We assume that the level of advertizing effects on the arrival rate of customers to the facility. The model without ‘word of mouth effect’ is assumed that the arrival rate is independent on the qualify of service level. We estimate the service quality by the balking rate of customers from system. We extend this to the model with ‘word of mouth effect’. To achieve the maximum profit, the most important factor is the considerably high utilization of facility for both models. Given service rate, we should maintain an effective arrival rate to some extent. To this end, among the available options, an increase of advertizing effort is more desirable than reducing the fee if the service value of customers remains unchanged. We also investigate whether the variability of service time has a significant impact on determining the optimal policy. The cost of service variability is not so expensive as that in a single server model due to the reduced variability of service times in a multiple-server model.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.720-723
• /
• 1997

This paper presents a cooperative control method for multiple robots. This method is based on local sensors. The proposed method integrates all information obtained by local perception through a set of sensors and generates commands without logical conflicts in designing control logic. To control multiple robots effectively, a global control strategy is proposed. These methods are constructed by using AND/OR logic and transition firing sequences in Petri nets. To evaluate these methods, the object-searching task is introduced. This task is to search an object like a box by two robots and consists of two sub-tasks, i.e., a wall tracking task and a robot tracking task. Simulation results for the object-searching task and the wall tracking task are presented to show the effectiveness of the method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.4
• /
• pp.404-408
• /
• 2013

In this Study, another way to accomplish the goal of meeting large steam-flow requirements is the use of multiple valves. Multiple valves can provide better control in meeting the precision pressure controller requirements. Simulation demonstrates the effectiveness of the pressure controller. The key point of this study is to precisely control the position of the control valve on the outside of the electro-hydraulic system using a special PID controller. Simulation and experiments verify the performance of the controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.1149-1154
• /
• 1991

For a robotic workcell, which consists of multiple robots, several interconnection methods are presented in terms of the processor based architecture. Since few attempts have been made to formulate and analyze multiple robot system(MRS), we turn the knowledge of multiple processor system(MPS) or multiple computer system(MCS) to good account. The performance evaluation is achieved through queueing analysis, the aim being to compare their response time, utilization, probability of service failure under different workload. To verify the validity of the proposed analysis methods, a computer simulation is performed. The results together with comments presented here give some useful guidelines for the selection of an appropriate interconnection method.

• ETRI Journal
• /
• v.28 no.1
• /
• pp.77-83
• /
• 2006

In order to improve the accuracy of cell selection in heterogeneous cellular systems, this paper proposes a fuzzy multiple-objective decision-based cell selection (FMDCS) strategy. Since heterogeneous cellular systems have different access technologies and multiple traffic classes, the strategy adopts cell type, data rate, coverage, transmission delay, and call arrival rate as evaluation indices, and uses different weight vectors according to the traffic classes of the mobile host. Then, a fuzzy multiple-objective decision algorithm is applied to select the optimal cell from all candidates. This paper also gives an instance analysis and simulation. The instance analysis shows FMDCS makes different selections for different traffic classes. Simulation results of the after-handoff quality-of-service (QoS) show the selected cell can provide MH optimal service.

• Journal of Korean Institute of Industrial Engineers
• /
• v.22 no.4
• /
• pp.689-703
• /
• 1996

In this paper, we evaluate the performance of zone-based registration. First, we propose a mobility function for single zone-based registration. And we establish the circumstances of multiple zone-based registration, which is based on the mobility function for single zone-based registration, and perform simulation programs for the circumstances. Using the simulation results, we obtain optimal N, the number of multiple zones which minimizes signalling traffic in radio channels. Results show that in most cases optimal N is 2. Multiple zone-based registration has less signalling traffic in radio channels than single zone-based registration and zone-based registration must be implemented as multiple zone-based registration.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.5
• /
• pp.569-581
• /
• 2003

A method of synthetic time series generation was developed and applied to the simulation of homogeneous turbulence in a periodic 3 - D box and the hourly wind data simulation. The method can simulate almost exact sample auto and cross correlations of multiple time series and control non-Gaussian distribution. Using the turbulence simulation, influence of correlations, non-Gaussian distribution, and one-direction anisotropy on homogeneous structure were studied by investigating the spatial distribution of turbulence kinetic energy and enstrophy. An hourly wind data of Typhoon Robin was used to illustrate a capability of the method to simulate sample cross correlations of multiple time series. The simulated typhoon data shows a similar shape of fluctuations and almost exactly the same sample auto and cross correlations of the Robin.

• IE interfaces
• /
• v.25 no.2
• /
• pp.264-275
• /
• 2012

The process of semiconductor(IC Package) manufacturing usually includes lots of complex and sequential processes. Many kinds of equipments are installed with the mixed concept of serial and parallel manufacturing system. The business environments of the semiconductor industry have been changed frequently, because new technologies are developed continuously. It is the main reason of new investment plan and layout consideration. However, it is difficult to change the layout after installation, because the major equipments are expensive and difficult to move. Furthermore, it is usually a multiple-objective problem. Thus, new investment or layout change should be carefully considered when the production environments likewise product mix and production quantity are changed. This paper introduces a simulation case study of a Korean company that produces packaging substrates(especially lead frames) and requires multi-objective decision support. $QUEST^{(R)}$ is used for simulation modelling and AHP(Analytic Hierarchy Process) and DEA(Data Envelopment Analysis) are used for weighting of qualitative performance measures and solving multiple-objective layout problem, respectively.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.4
• /
• pp.544-550
• /
• 2014

In this paper, we have proposed a novel method which can analysis the direction finding ambiguity analysis for array geometry in 3 channel and 4 channel multiple baseline direction finding system. Generally, the direction finding ambiguity in the 3 element and 4 element phase interferometer direction finding system is calculated by the simulation for the array spacing or by the probability with the selected antenna array spacing. There are some restrictions to obtain the ambiguity of direction finding system in these methods. The former performs a simulation with every antenna array spacing and the latter calculates the ambiguity with the selected antenna array spacing. To overcome those restrictions, This paper proposed the novel method to calculate the ambiguity using the imaginary antenna array spacing and the phase difference prior to the modular operation in direction finder. Using the proposed method, we obtain the ambiguity probability for each of array geometry composed of multiple baseline. After performing the simulation with the selected antenna array spacing to verify the proposed method, we compared the calculated result data with the simulation data.