• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1207-1212
• /
• 2018

The signal intelligence (SIGINT) technology is actively used for collecting various data, in a number of fields, including a military industry. In order to collect the signal information and data and to transmit/receive the collected data efficiently, the accurate angle-of-arrival (AOA) information is required and communication disturbance from the interference or jamming signal should be minimized. In this paper, we present the structure of an adaptive beam-forming satellite system based on the planar array antenna, for collecting and transmitting/receiving the signal information and data efficiently. The presented adaptive beam-forming system consists of an antenna in the form of a planar array, an AOA estimator based on the Multiple Signal Classification (MUSIC) algorithm, an adaptive Minimum Variance Distortionless Response (MVDR) interference canceler, a signal processing and D/B unit, and a transmission beamformer based on Minimum mean Square Error (MMSE). In addition, through the computer simulation, we evaluate and analyze the performance of the proposed system.

• Smart Structures and Systems
• /
• v.8 no.2
• /
• pp.219-237
• /
• 2011

This paper presents novel research into the source localization of multiple impacts. Source localization technology for single impact loads in a plate structure has been used for health monitoring. Most of research on source localization has been focused only on the localization of single impacts. Overlapping of dispersive waves induced by multiple impacts and reflection of those waves from the edge of the plate make it difficult to localize the sources of multiple impacts using traditional source localization technology. The method solving the overlapping problem and the reflection problem is presented in the paper. The suggested method is based on pre-signal processing technology using band pass filter and optimal filter. Results from numerical simulation and from experimentation are presented, and these verify the capability of the proposed method.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.4
• /
• pp.309-314
• /
• 2011

As a system becomes more complex, a design relies more heavily on a methodology based on high-level abstraction and functional verification. SystemVerilog includes characteristics of hardware design language and verification language in the form of extensions to the Verilog HDL. However, the OOP of System Veri log does not allow multiple inheritance. In this paper, we propose adoption of SystemC to introduce multiple inheritance. After being created, a SystemC unit is combined with a SystemVerilog-based verification environment using SystemVerilog DPI and ModelSim macro. Employing multiple inheritance of SystemC makes a design of a verification environment simple and easy through source code reuse. Moreover, a verification environment including SysemC unit has a benefit of reconfigurability due to OOP.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.5
• /
• pp.517-522
• /
• 2023

Existing radars have been developed by applying RF sub-array algorithms, and recently, fully digital Multiple-Input Multiple-Output (MIMO) radar algorithms have been implemented for vehicle radars. In this paper, the radar algorithm applying the Phased MIMO method to the hardware of the RF sub-array method, which is an unsecured technology, was implemented and verified in real time. In order to secure RF sub-array Phased MIMO algorithm technology, a hardware structure for FPGA-based real-time signal processing was presented, and performance was first predicted through design and simulation. Through this, the digital signal of FPGA-based broadband MIMO FMCW radar The processing hardware was developed, and the Phased MIMO radar algorithm of the RF sub-Array method was finally implemented and verified in real time. Based on this, it is judged that it will be possible to secure and apply core technologies necessary for terahertz band radar in the future.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.8
• /
• pp.1449-1455
• /
• 2010

The excitation control system of an emergency diesel generator is classified as a kind of safety-related system. Compared with other control systems in a power plant, this system is required to be more reliable and have better performance. In this paper, the digital multi-redundant excitation system for a diesel generator was proposed. The signal processing system of the proposed system makes high speed signal processing and arithmetic in excitation control possible. The improved soft start algorithm and multiple PI parameters adaptation considering the diesel generator characteristics were implemented in the proposed system. The developed system was applied to a nuclear power plant successfully.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.2
• /
• pp.89-94
• /
• 2001

The position control accuracy of a robot manipulator is significantly deteriorated when a long arm robot is operated at a high speed. This paper presents a very simple sliding mode control which eliminates multiple mode residual vibration in a robot manipulator. The neural network is used to avoid that sliding mode condition is deviated due to the change of system parameter and disturbance. This paper is suggested control system which designed by sliding mode controller using neural network. The effectiveness of proposed scheme is demonstrated through computer simulation.

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.3
• /
• pp.156-161
• /
• 2012

Random access protocol takes advantage of constructing a decentralized wireless network due to its intrinsic spectrum sensing capability. Such technical feature goes well with cognitive radio networks consisting of heterogeneous wireless systems, in which a centralized control between heterogeneous wireless systems is hard to be implemented. Motivated by the decentralized feature of the random access, we adopt the random access protocol in cognitive radio networks, and evaluate the performance of a CSMA-based cognitive radio network.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2006.06a
• /
• pp.1-4
• /
• 2006

본 논문에서는 보다 높은 보안 체계를 요구하는 환경에서 개인의 얼괄 인증과 RFID의 인증을 통한 다중 보안 시스템을 제안하고자 한다. 이 시스템은 추출된 얼굴 영상의 특징 벡터들을 각각 사용자의 태그에 저장하고 개인 인증 시 얼굴 영상의 입력과 비교 및 판독에 사용하도록 한다. 태그의 생체정보와 입력 얼굴영상에서 추출한 특징벡터가 일치하여야만 Database에 접근이 가능하며, 만약 하나라도 만족하지 못하면 인증은 실패한다. 이것은 사람의 얼굴뿐만 아니라 지문, 홍채 등의 생체인증 기술과 RFID와의 결합으로 보다 안전하고 효과적인 개인 인증 기술로 사용될 수 있을 것이다.

• Journal of Communications and Networks
• /
• v.9 no.4
• /
• pp.482-489
• /
• 2007

In this paper, two frequency domain signal processing techniques for pulse shape modulation(PSM) ultra wideband(UWB) systems are presented. Firstly, orthogonal detection of UWB PSM Hermite pulses in frequency domain is addressed. It is important because time domain detection by correlation-based receivers is severely degraded by many sources of distortion. Pulse-shape, the information conveying signal characteristic, is deformed by AWGN and shape-destructive addition of multiple paths from the propagation channel. Additionally, because of the short nature of UWB pulses, timing mismatches and synchronism degrade the performance of PSM UWB communication systems. In this paper, frequency domain orthogonality of the Hermite pulses is exploited to propose an alternative detection method, which makes possible efficient detection of PSM in dense multipath channel environments. Secondly, a ranging method employing the Cepstrum algorithm is proposed. This method is partly processed in the frequency domain and can be implemented without additional hardware complexity in the terminal.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.1
• /
• pp.61-66
• /
• 2002

A fuzzy control strategy is described which is utilized to control the joint angle and tip deflection in single flexible manipulator. In this paper, an existing model for a single flexible manipulator is used for the initial development of an FLC. One FLC is designed to govern the joint angle of the manipulator as it is rotated from one position to another, and the second FLC is designed to attenuate the tip deflection which result from joint angle body motion. Reference Trajectory Command is an important method to reduce vibration in flexible beam. This paper presents a very simple command control shaping which eliminates multiple mode residual vibration in a flexible beam combined parallel fuzzy controller. The effectiveness of proposed scheme is demonstrated through computer simulation.