• 한국통신학회논문지
• /
• 제38A권6호
• /
• pp.535-544
• /
• 2013

본 논문은 단일 송신안테나를 갖는 다수의 모바일 터미널이 가상 MIMO 링크를 구성하는 MIMO 시스템에서의 역방향 전력 제어 방법을 제안한다. 기존의 성능을 향상 시키기 위하여 전력 벌칙 항을 추가하는 게임이론 기반의 전력 제어 방식과 달리, 전체 유효 간섭 전력에 대한 제한 조건 하에서 선형 수신 빔형성을 이용한 전송율의 유틸리티 함수를 최대화 하는 방법을 고려하였다. 또한, 전력제어 과정에 이너시아를 도입하여 제안 전력 제어가 수렴함을 보였다. 모의 실험을 통하여 간섭이 지배적인 다중셀 시스템에서 제안 전력 제어 방법이 시스템의 성능을 크게 향상 시킴을 입증하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권3호
• /
• pp.1016-1033
• /
• 2016

In this paper, we present a joint relay-and-antenna selection and power allocation strategy for multiple-input multi-output (MIMO) amplify-and-forward (AF) two-way relay networks (TWRNs). In our approach, we select the best transmit and receive antennas at the two sources, a best relay and a best transmit and receive antenna at the selected relay based on maximizing the minimum of the end-to-end received signal-to-noise-ratios (SNRs) under a total transmit power constraints. We obtained the closed-form solution for the optimal power allocation firstly. Then with the optimal allocation solution we found, we can reduce the joint relay-and-antenna selection to a simpler problem. Besides, the overall outage probability is investigated and a tight closed-form approximation is derived, which provides a method to evaluate the outage performance easily and fast. Simulation results are presented to verify the analysis.

• Journal of Electrical Engineering and Technology
• /
• 제8권3호
• /
• pp.490-498
• /
• 2013

This paper discusses the application of evolutionary multi-objective optimization algorithms namely Non-dominated Sorting Genetic Algorithm-II (NSGA-II) and Modified NSGA-II (MNSGA-II) for solving the Combined Economic Emission Dispatch (CEED) problem with valve-point loading. The valve-point loading introduce ripples in the input-output characteristics of generating units and make the CEED problem as a non-smooth optimization problem. IEEE 57-bus and IEEE 118-bus systems are taken to validate its effectiveness of NSGA-II and MNSGA-II. To compare the Pareto-front obtained using NSGA-II and MNSGA-II, reference Pareto-front is generated using multiple runs of Real Coded Genetic Algorithm (RCGA) with weighted sum of objectives. Furthermore, three different performance metrics such as convergence, diversity and Inverted Generational Distance (IGD) are calculated for evaluating the closeness of obtained Pareto-fronts. Numerical results reveal that MNSGA-II algorithm performs better than NSGA-II algorithm to solve the CEED problem effectively.

• 품질경영학회지
• /
• 제46권1호
• /
• pp.39-74
• /
• 2018

Purpose: For more than 30 years, robust parameter design (RPD), which attempts to minimize the process bias (i.e., deviation between the mean and the target) and its variability simultaneously, has received consistent attention from researchers in academia and industry. Based on Taguchi's philosophy, a number of RPD methodologies have been developed to improve the quality of products and processes. The primary purpose of this paper is to review and discuss existing RPD methodologies in terms of the three sequential RPD procedures of experimental design, parameter estimation, and optimization. Methods: This literature study composes three review aspects including experimental design, estimation modeling, and optimization methods. Results: To analyze the benefits and weaknesses of conventional RPD methods and investigate the requirements of future research, we first analyze a variety of experimental formats associated with input control and noise factors, output responses and replication, and estimation approaches. Secondly, existing estimation methods are categorized according to their implementation of least-squares, maximum likelihood estimation, generalized linear models, Bayesian techniques, or the response surface methodology. Thirdly, optimization models for single and multiple responses problems are analyzed within their historical and functional framework. Conclusion: This study identifies the current RPD foundations and unresolved problems, including ample discussion of further directions of study.

• 한국통신학회논문지
• /
• 제34권10C호
• /
• pp.929-936
• /
• 2009

기존의 MIMO 다중 송수신기들이 협대역 flat 채널을 공유하고 있는 환경에서 오버레이 MIMO 시스템의 디자인을 고려한다. 오버레이 시스템의 수신기로 수신되는 기존 시스템 신호의 2nd-order 통계량과 오버레이 송신단으로부터 기존 시스템들의 수신단 사이의 채널이 모두 알려져 있다고 가정한다. 평균 송신 전력 제약과 이미 관심대역을 차지하고 있는 기존 시스템들의 수신단에 간섭을 일으키지 않는다는 제약 아래 오버레이 시스템의 각 수신안테나 출력에서의 데이터 심볼의 평균 제곱 오차 (MSE: mean-squared error)의 합인 전체 MSE를 최소화 하는 최적 오버레이 시스템의 선형 precoding과 decoding 행렬을 유도한다. 최적 해가 존재하기 위한 필요충분 조건 또한 유도하고, 제안된 시스템의 성능에 대한 모의 실험 결과를 제공한다.

• Journal of Communications and Networks
• /
• 제13권5호
• /
• pp.456-462
• /
• 2011

This paper investigates the outage behavior of peak interference power limited cognitive radio (CR) networks with multiple transmit antennas. In CR-multi-input single-output (MISO) channel, the total transmit power is distributed over the transmitantennas. First, we use the orthogonal space-time codes (STC) to achieve the transmit diversity at CR-receiver (rx) and investigate the effect of the power distribution on the interference power received at the primary-receiver (P-rx). Then, we investigate the transmit antenna selection (TAS) scheme in which the CR system selects the best transmit antenna and allocates all the power to the selected best antenna. Two transmit antenna selection strategies are proposed depending on if feedback channel is available or not. We derive the closed form expressions of outage probability and outage capacity of all schemes with arbitrary number of transmit-antennas. We show that the proposed schemes significantly improve the outage capacity over the single antenna systems in Rayleigh fading environment. We also show that TAS based scheme outperforms the STC based scheme when peak interference power constraint is imposed on the P-rx only if a feedback channel from CR-rx to CR-transmitter is available.

• 한국위성정보통신학회논문지
• /
• 제12권2호
• /
• pp.104-111
• /
• 2017

복수의 안테나를 사용하는 Pre-Rake CDMA 시스템은 복잡한 RAKE 합성기를 수신기에서 사용하지 않아도 좋은 수신 성능을 얻을 수 있는 장점이 있다. 그러나 Pre-Rake 시스템은 채널 추정오류에 크게 영향을 받기 때문에 시스템 성능 평가에 있어서 채널추정 오류는 반드시 고려되어야 한다고 볼 수 있다. 본 논문에서는 채널추정오류를 가지는 MISO Pre-Rake CDMA 시스템을 이론적인 해석을 통하여 분석한 후 도출된 결과를 컴퓨터 시뮬레이션을 이용해 얻은 결과와 비교한다. 이론적인 해석결과로 볼 때, Pre-Rake 시스템의 성능은 진폭오류 보다는 위상오류에 의한 영향을 크게 받는 것으로 확인되었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권5호
• /
• pp.2124-2141
• /
• 2018

Recent studies have revealed the efficacy of incorporating delayed channel state information at transmit side (CSIT) in transmission scheme design. This paper focuses on transmit precoder design to maximize the ergodic sum-rate in a two-user Multiple-Input Single-Output (MISO) system with delayed and statistical CSIT. A new transmit strategy which precodes signals in all transmit slots is proposed in this paper, denoted as all time-slots precoding Alternative MAT (AAMAT). There is a common procedure in conventional delayed-CSIT based schemes, which is retransmitting the overheard interferences. Since the retransmitting signal is intended to both users, all previous schemes tend to use only one antenna. We however figure out an improvement in spectral efficiency could be realized if all antennas can be utilized. In this paper, we detail the design of the procoder which enabling all antennas and also we compute a lower bound of the ergodic sum-rate in an ideal condition. In addition, simulation results demonstrate the superiority of our proposed scheme.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권2호
• /
• pp.353-368
• /
• 2023

The four wing unmanned aerial vehicle owns the characteristics of small size, light weight, convenient operation and well stability. But it is easily disturbed by external environmental factors during flight with these disadvantages of short endurance and poor attitude solving ability. For solving these problems, a microprocessor based on STM32 chip is designed and the overall development is completed by the resources such as built-in timer and multi-function mode general-purpose input/output provided by the master micro controller unit, together with radio receiver, attitude meter, barometer, electronic speed control and other devices. The unmanned aerial vehicle can be remotely controlled and send radio waves to its corresponding receiver, control the analog level change of its corresponding channel pins. The master control chip can analyze and process the data to send multiple sets pulse signals of pulse width modulation to each electronic speed control. Then the electronic speed control will transform different pulse signals into different sizes of current value to drive the motor located in each direction of the frame to generate different rotational speed and generate lift force. To control the body of the unmanned aerial vehicle, so as to achieve the operator's requirements for attitude control, the PID controller based on Kalman filter is used to achieve quick response time and control accuracy. Test results show that the design is feasible.

• Korean Chemical Engineering Research
• /
• 제46권3호
• /
• pp.486-491
• /
• 2008

상업용 12인치 급속가열장치(RTP)의 다변수 고급제어기를 개발하기 위하여 열전대가 부착된 웨이퍼를 대상으로 다변수 모델인식을 수행하였다. 웨이퍼에는 7개의 열전대가 설치되어 있으며 10개의 텅스텐-할로겐 램프 그룹으로 가열을 할 수 있다. 모델인식 실험과정에서 웨이퍼의 휨을 최소화하며 최종적으로 10-입력 7-출력의 균형 잡힌 상태공간 모델을 얻기 위한 모델인식방법을 제안하였다. 또한 넓은 온도영역에서 복사에 의한 비선형성을 가장 효과적으로 상쇄시킬 수 있는 출력변수 정의방법을 제안하였다. 600, 700, $800^{\circ}C$ 부근의 정상상태에서 실험을 수행하여 모델을 추정한 결과 상태의 차수는 80~100, 모델출력은 $y=T(K)^2$으로 결정하는 것이 바람직하며, 이때 one-step-ahead 온도예측 오차의 제곱평균은 0.125~0.135 K 정도로 나타났다.