• 대한수학회논문집
• /
• 제22권4호
• /
• pp.587-596
• /
• 2007

In this paper, we study two-phase flow models. The chunk mix model of the two-phase flow equations is analyzed by a characteristic analysis. The model discussed herein has real characteristic values for all physically acceptable states and except for a set of measure zero has a complete set of characteristic vectors in state space.

• Korea-Australia Rheology Journal
• /
• 제21권3호
• /
• pp.161-173
• /
• 2009

This study analyzes especially drag and lift models recently developed for fluid-solid, fluid-fluid or liquid-liquid two-phase flows to understand their applicability on the computational fluid dynamics, CFD modeling of pulsatile blood flow. Virtual mass effect and the effect of red blood cells, RBCs aggregation on CFD modeling of blood flow are also shortly reviewed to recognize future tendencies in this field. Recent studies on two-phase flows are found as very useful to develop more powerful drag-lift models that reflect the effects of blood cell's shape, deformation, concentration, and aggregation.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2002년도 추계 학술대회논문집
• /
• pp.144-149
• /
• 2002

This paper presents the result of numerical simulation of particles trace following melted zinc movement with nitrogen gas injection. The code of the computational fluid dynamics for numerical analysis was performed using FLUENT related to CFD. As application model, there was applied Eulerian multiphase model for simulation of melted zinc movement at first and then was used stochastic tracking technique for particles trace secondarily. Numerical simulation results are shown that particles move to the same direction as the movement of melted zinc.

• Journal of Computational Design and Engineering
• /
• 제1권3호
• /
• pp.173-186
• /
• 2014

The failure of a subsea production plant could induce fatal hazards and enormous loss to human lives, environments, and properties. Thus, for securing integrated design safety, core source technologies include subsea system integration that has high safety and reliability and a technique for the subsea flow assurance of subsea production plant and subsea pipeline network fluids. The evaluation of subsea flow assurance needs to be performed considering the performance of a subsea production plant, reservoir production characteristics, and the flow characteristics of multiphase fluids. A subsea production plant is installed in the deep sea, and thus is exposed to a high-pressure/ low-temperature environment. Accordingly, hydrates could be formed inside a subsea production plant or within a subsea pipeline network. These hydrates could induce serious damages by blocking the flow of subsea fluids. In this study, a simulation technology, which can visualize the system configuration of subsea production processes and can simulate stable flow of fluids, was introduced. Most existing subsea simulations have performed the analysis of dynamic behaviors for the installation of subsea facilities or the flow analysis of multiphase flow within pipes. The above studies occupy extensive research areas of the subsea field. In this study, with the goal of simulating the configuration of an entire deep sea production system compared to existing studies, a DES-based simulation technology, which can logically simulate oil production processes in the deep sea, was analyzed, and an implementation example of a simplified case was introduced.

• 대한전자공학회논문지SD
• /
• 제45권4호
• /
• pp.146-153
• /
• 2008

High speed serial link에 적합한 clock multiphase generator용 integrated phase-locked loop (PLL)을 설계하였다. 설계된 PLL은 programmable current mirror를 사용하여 동작 범위 안에서 동일한 loop bandwidth와 damping factor를 가진다. 또한 설계한 PLL 회로 netlists를 가지고 HSPICE 시뮬레이션을 통해 close-loop transfer function과 VCO의 phase noise transfer function을 구하였다. Board 위 칩의 자체 임피던스는 decoupling capacitor의 크기와 위치에 따라 계산된다. 세부적으로, close-loop transfer function에서 gain의 최대값과 VCO noise transfer function에서 gain의 최대값 사이의 주파수범위에서 decoupling capacitor의 크기와 위치에 따른 보드 위 칩의 자체 임피던스를 구하였다. 이를 바탕으로 보드에서의 decoupling capacitor의 크기와 위치가 PLL의 jitter에 어떠한 영향을 미치는지 분석하였다. 설계된 PLL은 1.8V의 동작 전압에서 400MHz에서 2GH의 wide operation range를 가지며 $0.18-{\mu}m$ EMOS공정으로 설계하였다. Reference clock은 100MHz이며 전체 PLL power consumption은 1.2GHz에서 17.28 mW이다.

• 한국가스학회지
• /
• 제17권1호
• /
• pp.26-34
• /
• 2013

상 변화(phase change)를 수반한 다상 유동 연구(multiphase flow analysis)는 증발, 응축과 같은 많은 분야에 적용, 응용될 수 있고 현상의 복잡성 때문에 많은 연구의 관심을 받고 있는 분야이다. 본 연구에서는 극저온 유체인 액화질소가 다양한 밀도의 글라스 울 내부 다공성 매질속으로 스며들면서 나타나는 거동을 살펴보았다. 유동에 영향을 미치는 투과성 계수에 대해서, 외부 압력의 영향성에 대한 실험을 진행하였고 논의하였다. 극저온 유체인 액화질소를 실험유체로 사용하여 사각 기둥 실린더 내부의 유체의 유동에 대한 실험으로 유체의 유동을 살펴보았다. 그 결과 벌크 밀도가 커짐에 따라 투과성 계수가 작아지고, 거리에 따른 압력변화의 비선형성이 커짐을 보였다. 마지막으로 CFD 전산유동 프로그램으로 실험결과와 동일한 상황을 모사하였으며, 이를 실험결과와 비교 분석하였다. 이에 대한 검증결과, 시뮬레이션 결과가 실험결과와 유사한 경향과 결과를 보여주었다.

• Nuclear Engineering and Technology
• /
• 제47권6호
• /
• pp.700-711
• /
• 2015

Sodium-cooled fast breeder reactors use liquid sodium as a moderator and coolant to transfer heat from the reactor core. The main hazard associated with sodium is its rapid reaction with water. Sodium-water reaction (SWR) takes place when water or vapor leak into the sodium side through a crack on a heat-transfer tube in a steam generator. If the SWR continues for some time, the SWR will damage the surface of the defective area, causing it to enlarge. This self-enlargement of the crack is called "self-wastage phenomena." A stepwise numerical evaluation model of the self-wastage phenomena was devised using a computational code of multicomponent multiphase flow involving a sodium-water chemical reaction: sodiumwater reaction analysis physics of interdisciplinary multiphase flow (SERAPHIM). The temperature of gas mixture and the concentration of NaOH at the surface of the tube wall are obtained by a numerical calculation using SERAPHIM. Averaged thermophysical properties are used to assess the local wastage depth at the tube surface. By reflecting the wastage depth to the computational grid, the self-wastage phenomena are evaluated. A two-dimensional benchmark analysis of an SWAT (Sodium-Water reAction Test rig) experiment is carried out to evaluate the feasibility of the numerical model. Numerical results show that the geometry and scale of enlarged cracks show good agreement with the experimental result. Enlarged cracks appear to taper inward to a significantly smaller opening on the inside of the tube wall. The enlarged outer diameter of the crack is 4.72 mm, which shows good agreement with the experimental data (4.96 mm).

• Coupled systems mechanics
• /
• 제8권4호
• /
• pp.339-350
• /
• 2019

A numerical simulation of the incompressible multiphase hydraulic jump flow was performed to compare the interface prediction through the use of the three RANS turbulence models: $k-{\varepsilon}$, $RNGk-{\varepsilon}$ and SST $k-{\omega}$. A three dimensional no submerged hydraulic jump and a two dimensional submerged hydraulic jump were modeled. Both the geometry and the mesh were created using the open source Gmsh code. The project's geometry consists of a rectangular channel with length and height differences between the two dimensional and three dimensional simulations. Uniform hexahedral cells were used for the mesh. Three refining meshes were constructed to allow to verify simulation convergence. The Volume of Fluid (abbr. VOF) method was used for treatment of the air-water surface. The turbulence models were evaluated in three distinct set up configurations to provide a greater accuracy in the flow representation. In the two-dimensional analysis of a submerged hydraulic jump simulation, the turbulence model RNG RNG $k-{\varepsilon}$ provided a better interface adjust with the experimental results than the model $k-{\varepsilon}$ and SST $k-{\omega}$. In the three-dimensional simulation of a no-submerged hydraulic jump the k-# showed better results than the SST $k-{\omega}$ and RNG $k-{\varepsilon}$ capturing the height and length of the ledge with a better fit with the experimental results.

• 한국자동차공학회논문집
• /
• 제15권6호
• /
• pp.62-72
• /
• 2007

Fracture analysis of human bone is necessary to predict the failure of musculoskeletal structures and to heal them by several possible mechanisms under different loading conditions. But human bone is a complex material, with a multiphase, heterogeneous and anisotropic microstructure. Due to the difficulty of obtaining experimental and clinical results, the importance of numerical analysis and computational simulations in biomechanics are increasing gradually. In this study, stress analysis for human femur model is performed by using the 2-dimensional finite element method(FEM) and its stress distribution is determined. From these results, the fracture mechanic parameters are calculated and the fracture criteria on human femur are investigated and discussed.

• Structural Engineering and Mechanics
• /
• 제62권5호
• /
• pp.519-535
• /
• 2017

In this article, static analysis of a magneto-electro-elastic (MEE) beam subjected to various thermal loading and boundary conditions has been investigated. Influence of pyroeffects (pyroelectric and pyromagnetic) on the direct quantities (displacements and the potentials) of the MEE beam under different boundary conditions is studied. The finite element (FE) formulation of the MEE beam is developed using the total potential energy principle and the constitutive equations of the MEE material taking into account the coupling between elastic, electric, magnetic and thermal properties. Using the Maxwell electrostatic and electromagnetic relations, variation of stresses, displacements, electric and magnetic potentials along the length of the MEE beam are investigated. Effect of volume fractions, aspect ratio and boundary conditions on the direct quantities in thermal environment has been determined. The present investigation may be useful in design and analysis of magnetoelectroelastic smart structures and sensor applications.