• International journal of advanced smart convergence
• /
• v.11 no.1
• /
• pp.28-35
• /
• 2022

This paper presents a performance evaluation of real-time Linux for industrial real-time platforms. On industrial platforms, multicore processors are popular due to their work distribution efficiency and cost-effectiveness. Multicore processors, however, are not designed for applications with real-time constraints, and their performance capabilities depend on their core configurations. In order to assess the feasibility of a multicore processor for real-time applications, we conduct a performance evaluation of a general processor and a low-power processor to provide an experimental environment of real-time Linux on both Xenomai and RT-preempt considering the multicore configuration. The real-time performance is evaluated through scheduling latency and in an environment with loads on the CPU, memory, and network to consider an actual situation. The results show a difference between a low-power and a general-purpose processor, but from developer's point of view, it shows that the low-power processor is a proper solution to accommodate low power situations.

• The Journal of Korean Institute of Next Generation Computing
• /
• v.15 no.2
• /
• pp.39-49
• /
• 2019

Recently, CPU-GPU integrated heterogeneous multicore processors have been widely used for improving the performance of computing systems. Heterogeneous multicore processors integrate CPUs and GPUs on a single chip where CPUs and GPUs share the LLC(Last Level Cache). This causes a serious cache contention problem inside the processor, resulting in significant performance degradation. In this paper, we propose the partitioned LLC architecture to solve the cache contention problem in heterogeneous multicore processors. We analyze the performance impact varying the LLC size of CPUs and GPUs, respectively. According to our simulation results, the bigger the LLC size of the CPU, the CPU performance improves by up to 21%. However, the GPU shows negligible performance difference when the assigned LLC size increases. In other words, the GPU is less likely to lose the performance when the LLC size decreases. Because the performance degradation due to the LLC size reduction in GPU is much smaller than the performance improvement due to the increase of the LLC size of the CPU, the overall performance of heterogeneous multicore processors is expected to be improved by applying partitioned LLC to CPUs and GPUs. In addition, if we develop a memory management technique that can maximize the performance of each core in the future, we can greatly improve the performance of heterogeneous multicore processors.

• Journal of Computing Science and Engineering
• /
• v.6 no.4
• /
• pp.267-278
• /
• 2012

The state-of-the-art techniques in multicore timing analysis are limited to analyze multicores with shared instruction caches only. This paper proposes a uniform framework to analyze the worst-case performance for both shared instruction caches and data caches in a multicore platform. Our approach is based on a new concept called address flow graph, which can be used to model both instruction and data accesses for timing analysis. Our experiments, as a proof-of-concept study, indicate that the proposed approach can accurately compute the worst-case performance for real-time threads running on a dual-core processor with a shared L2 cache (either to store instructions or data).

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.6
• /
• pp.173-178
• /
• 2014

By exploiting parallel processing, the proposed scheduling scheme enhances energy saving capability of multicore processors for real-time tasks while satisfying deadline and fault tolerance constraints. The scheme searches for a near minimum-energy schedule within a polynomial time, because finding the minimum-energy schedule on multicore processors is a NP-hard problem. The scheme consumes manifestly less energy than the state-of-the-arts method even with low parallel processing speedup as well as with high parallel processing speedup, and saves the energy consumption up to 86%.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.203-208
• /
• 2017

Recently, the importance of DRAM is very significant in multicore processors which are widely used in computers, laptops, tablet PCs, and mobile devices. To keep up with this, both industry and academia have actively studied various types of future DRAMs. Therefore, accurate DRAM model is requisite when evaluating the multicore processor performance. In this paper, a multicore processor trace-driven simulator which can couple with the cycle-accurate DRAM simulator has been developed. Using SPEC 2000 benchmarks as input, the effect of cycle-accurate DDR3 model on the multicore processor performance has been evaluated.

• ETRI Journal
• /
• v.35 no.2
• /
• pp.301-310
• /
• 2013

Nowadays, the multicore processor is watched with interest by people all over the world. As the design technology of system on chip has developed, observing and controlling the processor core's internal state has not been easy. Therefore, multicore processor debugging is very difficult and time-consuming. Thus, we need a reliable and efficient debugger to find the bugs. In this paper, we propose an on-chip debug architecture for multicore processors that is easily adaptable and flexible. It is based on the JTAG standard and supports monitoring mode debugging, which is different from run-stop mode debugging. Compared with the debug architecture that supports the run-stop mode debugging, the proposed architecture is easily applied to a debugger and has the advantage of having a desirable gate count and execution cycle. To verify the on-chip debug architecture, it is applied to the debugger of the prototype multicore processor and is tested by interconnecting it with a software debugger based on GDB and configured for the target processor.

• Journal of information and communication convergence engineering
• /
• v.18 no.4
• /
• pp.222-229
• /
• 2020

Recent multi-core processors for smart devices use per-core dynamic voltage and frequency scaling (DVFS) that enables independent voltage and frequency control of cores. However, because the conventional task scheduler was originally designed for per-core DVFS disabled processors, it cannot effectively utilize the per-core DVFS and simply allocates tasks evenly across all cores to core utilization with the same CPU frequency. Hence, we propose a novel task scheduler to effectively utilize percore DVFS, which enables each core to have the appropriate frequency, thereby improving performance and decreasing energy consumption. The proposed scheduler classifies applications into two types, based on performance-sensitivity and allows a performance-sensitive application to have a dedicated core, which maximizes core utilization. The experimental evaluations with a real off-the-shelf smart device showed that the proposed task scheduler reduced 13.6% of CPU energy (up to 28.3%) and 3.4% of execution time (up to 24.5%) on average, as compared to the conventional task scheduler.

• Journal of Computing Science and Engineering
• /
• v.6 no.1
• /
• pp.26-38
• /
• 2012

Java has been increasingly used in programming for real-time systems. However, some of Java's features such as automatic memory management and dynamic compilation are harmful to time predictability. If these problems are not solved properly then it can fundamentally limit the usage of Java for real-time systems, especially for hard real-time systems that require very high time predictability. In this paper, we propose to exploit multicore computing in order to reduce the timing unpredictability that is caused by dynamic compilation and adaptive optimization. Our goal is to retain high performance comparable to that of traditional dynamic compilation, while at the same time, obtain better time predictability for Java virtual machine (JVM). We have studied pre-compilation techniques to utilize another core more efficiently, preoptimization on another core (PoAC) scheme to replace the adaptive optimization system (AOS) in Jikes JVM and the counter based optimization (CBO). Our evaluation reveals that the proposed approaches are able to attain high performance while greatly reducing the variation of the execution time for Java applications.

• International journal of advanced smart convergence
• /
• v.7 no.3
• /
• pp.92-100
• /
• 2018

In this paper, we propose a fault-tolerant scheduling scheme with energy efficiency for real-time periodic tasks on DVFS-enabled multicore processors. The scheme provides the tolerance of a permanent fault with the primary-backup task model. Also the scheme reduces the energy consumption of real-time tasks with the fully overlapped execution between each primary task and its backup task, whereas most of previous methods tried to minimize the overlapped execution between the two tasks. In order to the leakage energy loss of idle cores, the scheme activates a part of available cores with rarely used cores powered off. Evaluation results show that the proposed scheme saves up to 82% energy consumption of the previous method.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.175-180
• /
• 2012

In order to overcome the complexity and performance limit problems of superscalar processors, the multicore architecture has been prevalent recently. The configuration and the size of instruction and data caches greatly gives effect on the performance of multicore processors. Using SPEC 2000 benchmarks as input, the trace-driven simulation has been performed for the 2-core to 16-core architectures with different sizes of caches extensively. As a result, the 2-way set associative instruction and data cache with the size of 64KB brought the best cost-effective performance.