• Bulletin of the Korean Chemical Society
• /
• 제33권8호
• /
• pp.2679-2682
• /
• 2012

A simple one-pot synthesis of two derivatives of 1,4-dihydropyridines has been described under reflux conditions using copper iodide nanoparticles (CuI NPs) as a catalyst in high yields. This method demonstrated four-component coupling reactions of aldehydes and ammonium acetate via two pathways. In one route, the reaction was performed using 2 eq ethyl acetoacetate while in the other one 1 eq ethyl acetoacetate and 1 eq malononitrile were used. The CuI NPs was reused and recycled without any loss of activity and product yield. It is noteworthy to state that wide range of the 1,4-dihydropyridines have attracted large interest due to pharmacological and biological activities.

• 대한화학회지
• /
• 제63권6호
• /
• pp.435-439
• /
• 2019

An efficient one pot multicomponent synthesis of pyrimidinone derivatives of Biginelli type is described. 4-amino-6-aryl-pyrimidine-5-carbonitrile molecules were synthesized efficiently via three-component Biginelli-type condensation of aldehyde, malononitrile, and semicarbazone as urea substituent in the presence of a catalytic amount of PEG-400 as green medium under microwave irradiation. The reactions proceeded efficiently in the presence of microwave radiation to afford the desired products in good to excellent yields. Products have been confirmed by IR, and NMR spectral analysis. All the molecules were tested for their antimicrobial activity against E. coli, S. aureus, P. aeruginosa and C. tropicalis. Some of the compounds have shown moderate to good inhibition efficiency against both gram-positive and gram-negative bacteria. The potent activity was observed against the fungal species with minimum inhibition concentration 12.5 ㎍/mL.

• 한국주조공학회지
• /
• 제26권1호
• /
• pp.27-33
• /
• 2006

Phase evolutions involving nucleation stages together with diffusional growth have been examined in order to provide a guideline for determining rate limiting stages during phase evolutions. In multiphase materials systems in coatings, composites or multilayered structures, diffusion treatments often result in the development of metastable/intermediate phases at the reaction interfaces. The development of metastable phases during solid state interdiffusion demonstrates that the nucleation reaction can be one controlling factor. Also, the concentration gradient and the relative magnitudes of the component diffusivities provide a basis for a phase selection and the application of a kinetic bias strategy in the phase selection. For multicomponent alloy systems, the identification of the operative diffusion pathway is central to control phase formation. Experimental access to the nucleation and growth stage is discussed in thin film multi layers and bulk samples.

• Bulletin of the Korean Chemical Society
• /
• 제32권3호
• /
• pp.787-792
• /
• 2011

Under mild conditions and without any additional organic solvent, synthesis of carbamatoalkyl naphthols could be carried out in the present of two halogen-free Br${\phi}$nsted acidic ionic liquids, 3-methyl-1-(4-sulfonic acid)butylimidazolium hydrogen sulfate and N-(4-sulfonic acid)butylpyridinium hydrogen sulfate. A wide range of aromatic aldehydes easily undergo condensation with $\beta$-naphthol and methyl or benzyl carbamate to afford the desired products of good purity in excellent yields. The present methodology offers several advantages such as a simple procedure with an easy work-up, short reaction times, and excellent yields. The catalysts could be recycled and reused for several times without substantial reduction in their catalytic activities.

• Bulletin of the Korean Chemical Society
• /
• 제30권11호
• /
• pp.2532-2534
• /
• 2009

A facile and efficient synthetic route has been developed for the polyhydroquinoline via four component reactions of aldehydes, dimedone, ethyl acetoacetate and ammonium acetate in the presence of catalytic amount of scolecite in ethanol at 70 ${^{\circ}C}$ through Hantzsch reaction. This method gives remarkable advantages such as simple work-up procedure, environmentally friendly, inexpensive, non-toxic and recyclable catalyst, shorter reaction time along with excellent yields.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.56-56
• /
• 2010

We report a low-temperature fabrication of organic/inorganic nanohybrid dielectrics for organic thin film transistors. The self-assembled organic layers (SAOLs) were grown by repeated sequential adsorptions of C=C-terminated alkylsilane and metal (Al or Ti) hydroxyl with ozone activation, which was called "molecular layer deposition (MLD)". The $TiO_2$ and $Al_2O_3$ inorganic layers were grown by ALD, which relies on sequential saturated surface reactions resulting in the formation of a monolayer in each sequence and is a potentially powerful method for preparing high quality multicomponent superlattices. The MLD method combined with ALD (MLD-ALD) was applied to fabricate SAOLs-$Al_2O_3$-SAOLs-$TiO_2$ nanohybrid superlattices on polymer substrates at relatively low temperature. The MLD method is an ideal fabrication technique for various flexible electronic devices.

• Bulletin of the Korean Chemical Society
• /
• 제32권6호
• /
• pp.1873-1878
• /
• 2011

Under solvent-free conditions and in one-pot, a series of 2-amino-4-aryl-3-cyano-6-(3,4-dimethoxyphenyl)-pyridines and 4-aryl-3-cyano-6-(3,4-dimethoxyphenyl)-2(1H)-pyridinones were prepared using 3,4-dimethoxyacetophenone, an aldehyde, malononitrile (or ethyl cyanoacetate), and ammonium acetate in the presence of 3-methyl-1-(4-sulfonylbutyl)imidazolium hydrogen sulfate $[HO_3S(CH_2)_4MIM][HSO_4]$ (a Br${\o}$nsted acidic ionic liquid) as the catalyst in very short reaction time. The preference for the formation of more stable tautomers was consistence with the theoretical calculation using the Gaussian 03 program at the B3LYP hybrid density functional level.

• Journal of Microbiology and Biotechnology
• /
• 제17권1호
• /
• pp.5-14
• /
• 2007

Nanotechnology is the creation and utilization of materials, devices, and systems through the control of matter on the nanometer. The technology has been applied to biodevices such as bioelectronics and biochips to improve their performances. Nanoparticles, such as gold (Au) nanoparticles, are the most widely used of the various other nanotechnologies for manipulation at the nanoscale as well as nanobiosensors. The immobilization of biomolecules is playing an increasingly important role in the development of biodevices with high performance. Nanopatteming technology, which is able to increase the density of chip arrays, offers several advantages, including cost lowering, simultaneous multicomponent detection, and the efficiency increase of biochemical reactions. A microftuidic system incorporated with control of nanoliter of fluids is also one of the main applications of nanotechnologies. This can be widely utilized in the various fields because it can reduce detection time due to tiny amounts of fluids, increase signal-to-noise ratio by nanoparticles in channel, and detect multi-targets simultaneously in one chamber. This article reviews nanotechnologies such as the application of nanoparticles for the detection of biomolecules, the immobilization of biomolecules at nanoscale, nanopatterning technologies, and the microfluidic system for molecular diagnosis.

• 방사성폐기물학회지
• /
• 제18권2호
• /
• pp.143-155
• /
• 2020

A reference electrode is important for controlling electrochemical reactions. Evaluating properties such as the reduction potential of the elements is necessary to optimize the electrochemical processes in pyroprocessing, especially in a multicomponent environment. In molten chloride systems, which are widely used in pyroprocessing, a reference electrode is made by enclosing the silver wire and molten salt solution containing silver chloride into the membranes. However, owing to the high temperature of the molten salt, the choice of the membrane for the reference electrode is limited. In this study, three types of electroceramic, mullite, Pyrex, and quartz, were compared as reference electrode membranes. They are widely used in molten salt electrochemical processes. The potential measurements between the two reference electrode systems showed that the mullite membrane has potential deviations of approximately 50 mV or less at temperatures higher than 650℃, Pyrex at temperatures lower than 500℃, and quartz at temperatures higher than 800℃. Cyclic voltammograms with different membranes showed a significant potential shift when different membranes were utilized. This research demonstrated the uncertainties of potential measurement by a single membrane and the potential shift that occurs because of the use of different membranes.

• 자원환경지질
• /
• 제25권3호
• /
• pp.225-232
• /
• 1992

The hydrothermal alteration is evaluated using multicomponent equilibrium calculations with the program CHILLER for the reactions between hydrothermal water and rhyolite at the temperature of $300^{\circ}C$ and pressure of 500 bars. The chemical-reaction model on the depositional processes of the sericitite confirms that the hydrothermal water-rock interaction(hydrothermal alteration) is the main mechanism of the sericitite formation. The principal change in the aqueous phase during the reaction is the pH increase. Overall trends for the major species are the increase in total molalities of K, Ca, $SiO_2$, Al, Mg, Fe, Na, and sulfide in solid phase with hydrothermal water-rhyolite reaction and the decrease of them in aqeous solution by precipitation of hydrothermal products. Quartz and sericite are the first minerals to form. The sequence of minerals to precipitate following them is chlorite, epidote, pyrite and microcline as water/rock ratio decreases. Although calculated results cannot duplicate the complexities of natural hydrothermal alteration, the calculation provides thermodynamic constraints on the natural process. The calculation results resemble those of experimental studies. Sericitite forms where pH decreases and water/rock ratio increases.