• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.725-730
• /
• 2001

This paper presents a vibration analysis method for constrained mechanical systems driven by constant generalized speeds. Equilibrium positions are obtained first and vibration analysis are performed around the positions. The method developed in this paper employs partial velocity matrix to obtain a minimum number of differential equations. To verify the accuracy of the proposed algorithm, linear vibration analyses of two numerical examples are performed and the results are compared with results from a commercial program or previous literature.

• 대한기계학회논문집
• /
• 제16권12호
• /
• pp.2298-2305
• /
• 1992

본 연구에서는 보의 종방향 강성치를 실제보다 훨씬 작은 횡방향 강성치 수준 으로 낮추어 시간 적분을 수행하는 대신, 종방향에 작용하는 힘을 분산시켜서 계산시 종방향 상대 변형을 억제하는 기법을 사용하였다. 또 여러개의 물체가 조인트에서 서로 연결되어 이루어진 다물체 도역학의 해는 운동 방정식과 기구학적 제한조건을 모 두 만족시켜야 하며, 상미분 방정식 해법용 시간 적분을 바로 적용할 수는 없다. 본 논문에서는 참고문헌(13)과 (14)에 소개된 반복계산법 및 계산가속기법에 의하여 Lag- range multiplier를 운동 방정식에서 소거한 후 시간 적분을 수행하는 방법을 사용한 다.

• 한국철도학회논문집
• /
• 제17권5호
• /
• pp.321-327
• /
• 2014

본 연구에서는 구속된 다물체계의 비선형 운동방정식으로부터 QR분해법을 이용하여 선형 운동방정식을 유도하는 방법을 제시하였다. 다물체계의 선형 진동 방정식을 철도차량 대차에 적용하여 대차의 고유 진동모드를 구하고 레일의 변위 입력에 대한 대차프레임의 전달 함수를 구하여 대차의 진동 특성을 분석하였다. 대차의 고유 모드는 35Hz이하에서 나타났고 198Hz이상에서 국부모드가 계산되었다. 대차 프레임의 수직변위 전달함수는 수직변위 모드와 피치 모드가 속도에 영향을 받기 때문에 속도에 따라 변화하는 것으로 나타났다. 횡방향 전달함수는 매우 작게 나타났으며 전후방향 전달함수는 속도에 관계없이 전후방향 변위 모드가 주로 가진되는 것으로 나타났다.

• 대한기계학회논문집
• /
• 제18권8호
• /
• pp.1974-1984
• /
• 1994

This paper presents a relative coordinate formulation for constrained mechanical systems. Relative coordinates are defined along degrees of freedom of a joint. Graph theoretic analyses are performed to identify topological paths in mechanical systems. Cut constraints are generated to handle closed loop systems. Equations of motion are derived in the Cartesian space and transformed to the joint space. Relative generalized coordinates are corrected to satisfy the cut constraints by a parametrizatiom method.

• International Journal of Automotive Technology
• /
• 제2권3호
• /
• pp.117-122
• /
• 2001

For a dynamic analysis of a constrained multibody system, it is necessary to have a routine for satisfying kinematic constraints. LU decomposition scheme, which is used to divide coordinates into dependent and independent coordinates, is efficient but has great difficulty near the singular configuration. Other method such as the projection matrix, which is more stable near a singular configuration, takes longer simulation time due to the large amount of calculation for decomposition. In this paper, the row space and the null space of the Jacobian matrix are proposed by using the pseudo-inverse method and the projection matrix. The equations of the motion of a system are replaced with independent acceleration components using the null space of the Jacobian matrix. Also a new hybrid method is proposed, combining the LU decomposition and the projection matrix. The proposed hybrid method has following advantages. (1) The simulation efficiency is preserved by the LU method during the simulation. (2) The accuracy of the solution is also achieved by the projection method near the singular configuration.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권4호
• /
• pp.64-71
• /
• 2002

Recently, mechanical systems such as a high-speed vehicles and railway trains moving on flexible beam structures have become a very important issue to consider. Using the general approach proposed in the first part of this paper, it is possible to predict motion of the constrained mechanical system and the elastic structure, with various kinds of foundation supporting conditions. Combined differential-algebraic equation of motion derived from both multibody dynamics theory and finite element method can be analyzed numerically using a generalized coordinate partitioning algorithm. To verify the validity of this approach, results from the simply supported elastic beam subjected to a moving load are compared with the exact solution from a reference. Finally, parametric study is conducted for a moving vehicle model on a simply supported 3-span bridge.

• Coupled systems mechanics
• /
• 제7권2호
• /
• pp.111-139
• /
• 2018

A successful methodology for modelling controlled destruction and progressive collapse of 2D reinforced concrete frames is presented in this paper. The strategy is subdivided into several aspects including the failure mechanism creation, and dynamic motion in failure represented with multibody system (MBS) simulation that are used to jointly capture controlled demolition. First phase employs linear elasto-plastic analysis with isotropic hardening along with softening plastic hinge concept to investigate the complete failure of structure, leading to creation of final failure mechanism that behaves like MBS. Second phase deals with simulation and control of the progressive collapse of the structure up to total demolition, using the nonlinear dynamic analysis, with conserving/decaying energy scheme which is performed on MBS. The contact between structure and ground is also considered in simulation of collapse process. The efficiency of the proposed methodology is proved with several numerical examples including six story reinforced concrete frame structures.

• 대한기계학회논문집A
• /
• 제29권3호
• /
• pp.369-386
• /
• 2005

Various aspects of structural optimization techniques under transient loads are extensively reviewed. The main themes of the paper are treatment of time dependent constraints, calculation of design sensitivity, and approximation. Each subject is reviewed with the corresponding papers that have been published since 1970s. The treatment of time dependent constraints in both the direct method and the transformation method is discussed. Two ways of calculating design sensitivity of a structure under transient loads are discussed - direct differentiation method and adjoint variable method. The approximation concept mainly focuses on re- sponse surface method in crashworthiness and local approximation with the intermediate variable Especially, as an approximated optimization technique, Equivalent Static Load method which takes advantage of the well-established static response optimization technique is introduced. And as an application area of dynamic response optimization technique, the structural optimization in flexible multibody dynamic systems is re- viewed in the viewpoint of the above three themes

• 한국전산구조공학회논문집
• /
• 제18권2호
• /
• pp.141-149
• /
• 2005

본 논문에서는 유연체 동역학해석을 위하여 유한회전을 표현하는데 있어, 4원법의 대수학적인 표현을 도입하여 운동방정식이 에너지보존 조건을 만족하도록 이산화된 에너지 평형식으로 정식화되었다. 여기서 사용된 유한회전의 4원법은 로드리게스 매개변수를 이용하도록 하였으며, 구속력에 대한 일이 제거되도록 하였다. 수치해석의 예를 통하여 제안된 방법이 사다리꼴 방법과 비교할 때 비선형 문제에서도 무조건적으로 안정조건을 보장함을 검증하였으며, 향후 유연한 관절로 연결된 3차원 유연다물체에 대한 동역학 해석을 확장할 수 있는 토대를 마련하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 봄 학술발표회 논문집
• /
• pp.9-16
• /
• 2004

This paper deals with the development of computational schemes for the dynamic analysis of flexible and nonlinear multibody systems. Different from the existing method, this paper introduces the quaternion algebra to develop the equation of the conservation of energy. Simultaneously, Rodrigues parameters are used to express the finite rotation for the proposed scheme. The proposed energy scheme is derived such that it provides unconditionally stable conditions for the nonlinear problems. Several examples of dynamic systems are presented which illustrate the efficiency and accuracy of the developed energy schemes.