• Journal of Communications and Networks
• /
• 제7권4호
• /
• pp.462-470
• /
• 2005

We propose a multi-rate and multi-BEP transmission scheme using adaptive overlapping pulse-position modulator (OPPM) and optical power controller in optical code division multiple access (CDMA) networks. The proposed system achieves the multi-rate and multi-BEP transmission by accommodating users with different values of OPPM parameter and transmitted power in the same network. The proposed scheme has advantages that the system is not required to change the code length and number of weight depending on the required bit rate of a user and the difference of bit rates does not have so much effect on the bit error probabilities (BEPs). Moreover, the difference of transmitted powers does not cause the change of bit rate. We analyze the BEPs of the four multimedia service classes corresponding to the com­binations of high/low-rates and low/high-BEPs and show that the proposed scheme can easily achieve distinct differentiation of the service classes with the simple system configuration.

• 한국ITS학회 논문지
• /
• 제7권5호
• /
• pp.131-138
• /
• 2008

시스템의 성능은 RMS 지연확산과 도플러 주파수와 같은 채널 변수에 영향을 받는다. 이 논문은 Multi-rate MC-CDMA 시스템에서 주파수 다이버시티와 코드 간 간섭과의 관계에 대하여 연구하였다. Multi-rate MC-CDMA 시스템은 MC-CDMA 시스템보다 다양한 데이터율을 전송할 수 있는 장점이 있을 뿐 아니라, OFDMA와 다르게 주파수 다이버시티 이득을 얻음으로써 성능을 향상시킬 수 있다. 하지만, 확산코드를 사용함으로써 주파수 다이버시티 이득과 코드간 간섭간의 trade-off 관계가 있다. 그러므로 이러한 관계를 평가하여, 시스템을 효율적으로 사용함으로써 성능을 향상시킬 수 있다. 주파수 다이버시티 이득과 코드 간 간섭의 관계를 효과적으로 평가하기 위하여, 우리는 도플러 주파수와 RMS 지연확산을 변화시키며 모의실험을 수행하였고, 그 결과를 분석하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.89-92
• /
• 2001

In this paper, adaptive multi-stage parallel interference cancellation (PIC) receiver is considered for a multi-rate DS-CDMA system. In each stage of the adaptive multi-stage PIC receiver, multiple access interference (MAI) estimates are obtained using the sub-bit estimates from the Previous stage and the adaptive weights for the sub-bit estimates. The adaptive weights are obtained by minimizing the mean squared error between the received signal and its estimate through a least mean square (LMS) algorithm. It is shown that the adaptive multi- stage PIC receiver achieves smaller BER than the matched filter receiver, multi-stage PIC receiver, and multi-stage partial PIC receiver for the multi-rate DS-CDMA system in a Rayleigh fading channel.

• 전기학회논문지
• /
• 제61권5호
• /
• pp.735-743
• /
• 2012

In this paper, we present model predictive control (MPC) applied to lane keeping system (LKS) based on a vision module. Due to a slow sampling rate of the vision system, the conventional LKS using single rate control may result in uncomfortable steering control rate in a high vehicle speed. By applying MPC using multi-rate Kalman filter to active steering control, the proposed MPC-based active steering control system prevents undesirable saturated steering control command. The effectiveness of the MPC is validated by simulations for the LKS equipped with a camera module having a slow sampling rate on the curved lane with the minimum radius of 250[m] at a vehicle speed of 30[m/s].

• 한국통신학회논문지
• /
• 제24권6A호
• /
• pp.855-863
• /
• 1999

최근 들어 다양한 종류의 정보를 원하는 속도와 서비스품질(QOS)로 전송하고자 하는 Multi-Rate CDMA 시스템들에 대한 연구가 활발하다. 본 연구에서는 다양한 종류의 정보를 보내는데 있어서 쉽게 기존의 CDMA 시스템과 융화 될 수 있으며, 사용자가 요구하는 QOS와 전송 속도를 만족시킬 수 있는 Multi-Code CDMA 시스템에서 주요한 요소로 고려되고 있는 전력 증폭기의 비선형성을 고려하여 Multi-Code CDMA 시스템의 성능을 분석하였다. 분석에 사용한 비선형 증폭기의 모델링에는 다항식을 사용하였으며, 분석 결과 특히 주파수 선택적 페이딩의 경우 비선형에 의한 영향이 AWGN 채널에 비하여 훨씬 더 큼을 알 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.396-402
• /
• 2003

본 논문에서는 multi-media service를 제공하는데 smart antenna system을 적용했을 때의 performance 를 각 서비스별 특성에 따라 평가한다. 서로 다른 다중 rate 의 신호가 각각의 안테나를 통해서 수신되는 환경 하에서 adaptive smart antenna를 적용함으로써 보다 고속이고 향상된 용량의 서비스를 제공할 수 있도록 하기 위해서는 사용자의 지리적 분포 또는 간섭 전력에 따라서 성능 특성이 달라지므로 이에 대한 성능 분석을 시뮬레이션을 통해서 수행한다.

• Journal of Electrical Engineering and Technology
• /
• 제10권6호
• /
• pp.2406-2412
• /
• 2015

Multi-user multi-input multi-output (MU-MIMO) system has attracted the 4^th generation wireless network as one of core technique for performance enrichment. In this system rate control is a challenging problem and another problem is optimization. Proper scheduling can resolve these problems by deciding which set of user and at which rate the users send their data. This paper proposes a new multi-parameter based scheduling (MPS) for downlink multi-user multiple-input multiple-output (MU-MIMO) system under space-time block coding (STBC) transmissions. Goal of this MPS scheme is to offer improved link level performance in terms of a low average bit error rate (BER), high packet delivery ratio (PDR) with improved resource utilization and service fairness among the user. This scheme allows the set of users to send data based on their channel quality and their demand rates. Simulation compares the MPS performance with other scheduling scheme such as fair scheduling (FS), normalized priority scheduling (NPS) and threshold based fair scheduling (TFS). The results obtained prove that MPS has significant improvement in average BER performance with improved resource utilization and fairness as compared to the other scheduling scheme.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.753-757
• /
• 2004

This paper describes a PC-based distributed multi-rate realtime control system using USB protocol, which is developed as a general motion controller. The control system consists of two control programs: one running at 1 kHz sampling rate on a PC with Linux and another running at 10 kHz sampling rate on a remotely located motion control card called RASID (remote axis serial interface device). Two programs communicates through USB at every 1 msec. A USB communication driver is developed to ensured the 1 msec desired communication time. The main program running on the PC generates reference trajectory at 1 kHz and send it to the RASID through USB and RASIDs located near the motors gather the sensor information and execute the low-level control at 10 kHz. The USB-based connectivity reduces the wiring harness and eventually the manufacturing cost of the machine. The multi-rate nature of the developed system improves the control capability. The effect of sampling rate is analyzed and simulated.

• 한국의류산업학회지
• /
• 제5권3호
• /
• pp.295-298
• /
• 2003

The study investigated the effect of multi-functional fabric on the autonomic nervous function and psychological variables of 20 students. The experimental group exhibited lower values in anxiety, depression, fatigue and stress level and higher emotional level. This study reveals that multi-functional fabrics reduced the low frequency/high frequency power ratio of heart rate variability. These results support the multi-functional fabrics increases cardiac parasympathetic tone. In addition, experimental group were found to have lower heart rate compared with controls. This augmented heart rate in experiment provides support for stablizing autonomic nervous system. In conclusion, multi-functional fabrics may stabilize the autonomic nervous system and psychological symptoms.

• 한국항공운항학회지
• /
• 제18권4호
• /
• pp.67-72
• /
• 2010

In this study, performance analysis and design optimization is carried out for a multi-rate spring brake system, which is used in a cable ride to stop the arriving passengers in safe and comfortable manner. Mathematical model for the spring is developed toward the objective of minimizing the impact at the arrival while satisfying the constraint of limited distance at the stop. Matlab code is utilized to examine parameters affecting the performance of the brake system. The results are validated by a commercial software RecurDyn. Kriging meta model is used to reduce the computational cost of the analysis. Optimization is conducted by RecurDyn, from which the design parameters are determined that minimizes the impact at the stop.