• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.27-33
• /
• 2013

In this paper, we design and analyze the performance of Coordinated Multi-Point (CoMP) techniques to the number of users for next-generation cellular systems. We perform Monte Carlo simulations with Long Term Evolution-Advanced (LTE-Advanced) and confirm the performance from the graph of the Cumulative Distribution Function (CDF). From simulation results, we show the significant performance gain when CoMP technique is used and also show better performance when we apply the various schemes additionally as scheduling and precoding.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.80-83
• /
• 2010

This paper describes an analysis of decoding performance of multi-mode LDPC(Low Density Parity Check) decoder which supports three block lengths (648, 1296, 1944) and four code rates (1/2, 2/3,3/4, 5/6) for IEEE 802.11n WLAN system. A fixed-point model of LDPC decoder which adopts min-sum algorithm and layered decoding scheme is implemented using Matlab. From fixed-point simulation results for various bit-width parameters such as internal bit-width, bit-width of integer and fractional parts, an optimal design condition and decoding performance of LDPC decoder are analyzed.

• Journal of Sensor Science and Technology
• /
• v.9 no.4
• /
• pp.307-315
• /
• 2000

To set up the arrays system of FBG(Fiber Bragg Grating) Hydrophone sensor and realize the multi-point signal detection for the wide scope underwater, using WDM(Wavelength Division Multiplexing) method and Passive band-pass filter system, underwater acoustic signal detection of the newly designed two FBG Transducers is successfully experimented. As a result of the experiment, it was possible each signal with different frequent signals is detected for the multi-point up to 1.3KHz in underwater. We can, therefore, prove the possibility on the system design of Hydrophone sensor arrays, using the newly made FBG Transducers.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.127-132
• /
• 2000

This paper describes a 3-phase Line-Interactive APF system and analyzes its operating characteristics considering LC Filter output characteristics. Topology of APF is similar to that of Off-Line UPS in the point of parallelly operating inverter system. So it is possible to be multi-functioned active compensating system according to power condition. Likewise this actively operating system from APF to UPS and vice versa is often to be called Line-Interactive system. And more than that Line-Interactive system needs precise design of LC filter on converter output side to make this system fully operate in both APF and UPS modes. The problem in this point is how to design LC Filter to be contented with two different system characteristics so this paper analyzes this problem and proposes its design procedures. Then suggested filter design is verified to be contented by the simulations and experimental results

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.588-594
• /
• 2001

본 연구를 통해 초음속 전투기 날개의 공력-구조를 동시에 고려한 다학제간 설계를 수행하였다. 공력해석을 위해 사용된 3 차원 Euler Code는 수렴 속도를 개선하기 위해 Multigrid를 적용하였으며, 3차의 transfinite interpolation을 사용하여 O-H type의 공력해석 격자계를 생성하였다. 구조 분야는 절점당 54개의 자유도를 가지는 9 절점 쉘 혼합 유한요소(9-node shell mixed finite element)를 사용하여 해석을 수행하였다. 설계변수는 공력쪽으로 날개의 평면형상에 관련된 변수 3개, 구조쪽은 날개 윗면과 아래면의 표피두께에 관련된 4개의 설계변수 사용하였으며, D-optimality 조건을 만족시키는 실험점들에 대해 공력해석과 구조해석이 연동된 정적 공탄성 해석을 수행한 후, 반응면 기법을 이용하여 목적함수와 제약조건에 대한 반응면을 구성하였다. 단일점 설계를 수행한 후 이를 바탕으로 3개의 설계점을 동시에 고려한 다점 설계를 수행하였으며, 공력만을 고려한 설계 결과와 공력-구조를 동시에 고려한 다학제간 설계결과의 비교를 통해 다학제간 설계의 타당성과 우수성을 입증하였다.

• Journal of information and communication convergence engineering
• /
• v.8 no.4
• /
• pp.393-398
• /
• 2010

For multi-cell environments, coordinated random beamforming technique in multiuser MIMO(multiple-input multiple-output) broadcast channel is considered. In order to mitigate severe interference at receivers, the multi-cell environments might require complex transmitter and receiver design because the scheduler decision based on full channel state information (CSI) in one cell must be intertwined with decision made by other cells' CSI. With limited CSI, however, this paper considers a scheme of randomizing transmitters' beamforming but being coordinated with other cell transmitters. The transmitters in each cell share random beamforming patterns and schedule data transmission within coherent scheduling period. The corandomized beams allow the users to be selected with the highest SINRs even in multi-cell environments. We analyze the performance of the proposed scheme. And numerical results show that the scheme achieves better performance than the conventional random beamforming when applying to multi-cell environments.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.99-107
• /
• 2008

The COMS is a kind of geostationary multi-functional satellites with three different mission objectives. Two of them aim at earth observation and the COMS has two optical payloads according to those missions. The payloads are composed of a meteo imager and an ocean color imager, and their inherent characteristics require optimal interface design for their performance to be concurrently achieved. Therefore, various kinds of constraints are considered in their component accommodation on the COMS platform. This paper shows a general overview of the optical payload accommodation design and describes the design consideration to achieve the optimized performance from thermal and mechanical point of view.

• 유체기계공업학회:학술대회논문집
• /
• 1998.12a
• /
• pp.159-165
• /
• 1998

Bearing design of turbo type geared centrifugal air compressor for low vibration level has been studied. The Transfer Matrix Method was used in this paper to analyze the air-compressor consisting of impellers, multi-stage geared rotors, and oil-film hearings. We have to consider this air-compressor as multi-geared rotating system, because characteristics of rotor-bearing system are different from conventional characteristics of non-rotating system. From the view point of Rotordynamics, the stiffness and damping coefficient of oil-film bearing in case of compressor system are more sensitive than other design parameters such as shaft length, shaft diameter and the weight of impellers, etc. Therefore, the stiffness and damping coefficients on each bearing were considered as design parameters. As the result of this study, turbo type air compressor with low vibration level can be achieved.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.1
• /
• pp.36-54
• /
• 1996

This paper presents a design procedure of engine power system for vehicle. The implementation and operation environment of engine plant is somewhat diversed through the various kind of vehicles. Regarding this point, we adopt a multi-purposed design objective function which can be easily modified to reflect diverse mount design rules which have been recommended and used generally by relating fields. To search the mount parameters which provide the optimal performance, a direct search method based on an orthogonal array is developed and applied. Through several simulated results, the effectiveness of the developed disign tool is investigated and discussed.

• Journal of information and communication convergence engineering
• /
• v.6 no.3
• /
• pp.285-288
• /
• 2008

Most of multimedia processors for 2D/3D graphics acceleration use a lot of integer/floating point arithmetic units. We present a new architecture with an efficient ALU, built in a smaller chip size. It reduces instruction cycles significantly based on a foundation of multi-thread operation, variable length instruction words, dual phase operation, and phase instruction's coordination. We can decrease the number of instruction cycles up to 50%, and can achieve twice better performance.