• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.4
• /
• pp.832-839
• /
• 2009

In this paper, we introduce an design of fuzzy relation-based fuzzy neural networks with multi-output. Fuzzy relation-based fuzzy neural networks comprise the network structure generated by dividing the entire input space. The premise part of the fuzzy rules of the network reflects the relation of the division space for the entire input space and the consequent part of the fuzzy rules expresses three types of polynomial functions such as constant, linear, and modified quadratic. For the multi-output structure the neurons in the output layer were connected with connection weights. The learning of fuzzy neural networks is realized by adjusting connections of the neurons both in the consequent part of the fuzzy rules and in the output layer, and it follows a back-propagation algorithm. In addition, in order to optimize the network, the parameters of the network such as apexes of membership functions, learning rate and momentum coefficient are automatically optimized by using real-coded genetic algorithm. Two examples are included to evaluate the performance of the proposed network.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.6
• /
• pp.1882-1890
• /
• 2014

This paper proposes an augmented Lagrange Hopfield network (ALHN) based method for solving multi-objective short term fixed head hydrothermal scheduling problem. The main objective of the problem is to minimize both total power generation cost and emissions of $NO_x$, $SO_2$, and $CO_2$ over a scheduling period of one day while satisfying power balance, hydraulic, and generator operating limits constraints. The ALHN method is a combination of augmented Lagrange relaxation and continuous Hopfield neural network where the augmented Lagrange function is directly used as the energy function of the network. For implementation of the ALHN based method for solving the problem, ALHN is implemented for obtaining non-dominated solutions and fuzzy set theory is applied for obtaining the best compromise solution. The proposed method has been tested on different systems with different analyses and the obtained results have been compared to those from other methods available in the literature. The result comparisons have indicated that the proposed method is very efficient for solving the problem with good optimal solution and fast computational time. Therefore, the proposed ALHN can be a very favorable method for solving the multi-objective short term fixed head hydrothermal scheduling problems.

• The KIPS Transactions:PartC
• /
• v.12C no.1 s.97
• /
• pp.11-18
• /
• 2005

This paper proposes a packet header collector, based on a network processor with multi-processor and multi-threads, that shows a high throughput on gigabit network. The proposed collector has an architecture to separate packets coming from gigabit network into headers and payloads, and distribute them to multiple 100Mbit MAC ports. The architecture hiring a unique buffer management method and load distribution strategy among multiple processors is evaluated empirically in depth.

• Journal of Information Processing Systems
• /
• v.11 no.1
• /
• pp.39-56
• /
• 2015

Continuous multi-interval prediction (CMIP) is used to continuously predict the trend of a data stream based on various intervals simultaneously. The continuous integrated hierarchical temporal memory (CIHTM) network performs well in CMIP. However, it is not suitable for CMIP in real-time mode, especially when the number of prediction intervals is increased. In this paper, we propose a real-time integrated hierarchical temporal memory (RIHTM) network by introducing a new type of node, which is called a Zeta1FirstSpecializedQueueNode (ZFSQNode), for the real-time continuous multi-interval prediction (RCMIP) of data streams. The ZFSQNode is constructed by using a specialized circular queue (sQUEUE) together with the modules of original hierarchical temporal memory (HTM) nodes. By using a simple structure and the easy operation characteristics of the sQUEUE, entire prediction operations are integrated in the ZFSQNode. In particular, we employed only one ZFSQNode in each level of the RIHTM network during the prediction stage to generate different intervals of prediction results. The RIHTM network efficiently reduces the response time. Our performance evaluation showed that the RIHTM was satisfied to continuously predict the trend of data streams with multi-intervals in the real-time mode.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.9
• /
• pp.854-862
• /
• 2012

The optimal design of batch-storage network by using periodic square wave model provides analytical lot sizing equations for a complex supply chain network characterized as multi-supplier, multi-product, multi-stage, non-serial, multi-customer, cyclic system including recycling and/or remanufacturing. The network structure includes multiple currency flows as well as material flows. The processes are represented by multiple feedstock/product materials with fixed composition which are very suitable for production processes. In this study, transportation processes that carry multiple materials with unknown composition are added and the time frame is changed from single period into multiple periods in order to represent nonperiodic parameter variations. The objective function of the optimization involves minimizing the opportunity costs of annualized capital investments and currency/material inventories minus the benefit to stockholders in the numeraire currency. The expressions for the Kuhn-Tucker conditions of the optimization problem are reduced to a multiperiod subproblem for average flow rates and analytical lot-sizing equations. The multiperiod lot sizing equations are different from single period ones. The effects of corporate income taxes, interest rates and exchange rates are incorporated.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.6
• /
• pp.770-778
• /
• 2012

In this paper, we propose a multi-path construction scheme to improve the survivability of a multicast session in military hybrid networks. A military hybrid network consists of a static backbone network and multiple mobile stub networks where some nodes are frequently susceptible to be disconnected due to link failure and node mobility. To improve the survivability of multicast sessions, we propose a construction scheme of ${\kappa}$ redundant multi-paths to each receiver. In order to take account of different characteristics of static and mobile networks, we propose quite different multi-path setup approaches for the backbone and stub networks, respectively, and combine them at the boundary point called gateway. We prove that our proposed scheme ensures that each receiver of a multicast session has ${\kappa}$ redundant paths to the common source. Through simulations, we evaluate the performance of the proposed schemes from three aspects : network survivability, recovery cost, and end-to-end delay.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.4
• /
• pp.497-507
• /
• 2018

Tactical networks are evolving into an All-IP based network for network centric warfare(NCW). Owing to the flexibility of IP based network, various military data applications including real-time and multi-media services are being integrated in tactical networks. Because each application has diverse Quality-of-service(QoS) requirements, it is crucial to develop a QoS provisioning method for guaranteeing QoS requirements efficiently. Conventionally, differentiated services(DiffServ) have been used to provide a different level of QoS for traffic flows. However, DiffServ is not designed to guarantee a specific requirement of QoS such as delay, loss, and bandwidth. Therefore, it is not suitable for military applications with a tight bound of QoS requirements. In this paper, we propose a multi-layer network virtualization scheme that allocates traffic flows having different QoS requirements to multiple virtual networks, which are constructed to support different QoS policies such as virtual network functions(VNFs), routing, queueing/active queue management(AQM), and physical layer policy. The experiment results indicate that the proposed scheme achieves lower delays and losses through multiple virtual networks having differentiated QoS policies in comparison with conventional networks.

• Membrane and Water Treatment
• /
• v.10 no.1
• /
• pp.75-82
• /
• 2019

In a highly urbanized area, land availability is limited for the installation of space consuming stormwater systems for best management practices (BMPs), leading to the consideration of underground stormwater treatment devices connected to the stormwater pipe system. The configuration of a stormwater pipe network determines the hydrological and pollutant transport characteristics of the stormwater discharged through the pipe network, and thus should be an important design consideration for effective management of stormwater quantity and quality. This article presents a multi-objective optimization approach for designing a stormwater pipe network with on-line stormwater treatment devices to achieve an optimal trade-off between the total installation cost and the annual removal efficiency of total suspended solids (TSS). The Non-dominated Sorted Genetic Algorithm-II (NSGA-II) was adapted to solve the multi-objective optimization problem. The study site used to demonstrate the developed approach was a commercial area that has an existing pipe network with eight outfalls into an adjacent stream in Yongin City, South Korea. The stormwater management model (SWMM) was calibrated based on the data obtained from a subcatchment within the study area and was further used to simulate the flow rates and TSS discharge rates through a given pipe network for the entire study area. In the simulation, an underground stormwater treatment device was assumed to be installed at each outfall and sized proportional to the average flow rate at the outfall. The total installation cost for the pipes and underground devices was estimated based on empirical formulas using the flow rates and TSS discharge rates simulated by the SWMM. In the demonstration example, the installation cost could be reduced by up to 9% while the annual TSS removal efficiency could be increased by 4% compared to the original pipe network configuration. The annual TSS removal efficiency was relatively insensitive to the total installation cost in the Pareto-optimal solutions of the pipe network design. The results suggested that the installation cost of the pipes and stormwater treatment devices can be substantially reduced without significantly compromising the pollutant removal efficiency when the pipe network is optimally designed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.110-118
• /
• 2007

In multi-hop wireless network, multi-channel makes it possible to enhance network performance because it reduces channel interferences md contentions. Recently several schemes have been proposed in the literatures to use multi-channel. Especially, MCR(Multi channel routing protocol), which utilize hybrid interface assignment, is a prominent routing protocol. MCR uses simple way to change channel but efficiently reduce channel interferences. In this paper, we propose a load-aware channel selection algorithm called LCS that enhances the channel switching algerian used in MCR protocol. In LCS, channel of a node is assigned based on collected information about queue length of neighbors. Moreover this paper evaluates the performance of in by using simulation test and testbed demonstration. Test results show that the MCR with LCS outperforms the naive MCR.

• Journal of the Korea Society of Computer and Information
• /
• v.6 no.4
• /
• pp.68-73
• /
• 2001

MPLS(Multi protocol Label Switching) is standard skill for added to speed and control the Network Traffic. MPLS concerned the routing protocol to relative Pack line, Each Pack composed label and node, saved the time to seek the address of node. MPLS worked IP, ATM and Network protocol of flame rely. MPLS is Network OSI suport model, 2Layer send to most of Packinsted of 3Layer Switching. MPLS is added speed Traffic of QoS and effective controled the Network.