• 한국수소및신에너지학회논문집
• /
• 제27권6호
• /
• pp.642-650
• /
• 2016

One of the most feasible solution for reducing the excessive energy consumption and carbon dioxide emission is usage of more efficient fuel such as hydrogen. As is well known, there are three viable technologies for storing hydrogen fuel: compressed gas, metal hydride absorption, and cryogenic liquid. In these technologies, the storage for liquid hydrogen has better energy density by weight than other storage methods. However, the cryogenic liquid storage has a significant disadvantage of boiling losses. That is, high performance of thermal insulation systems must be studied for reducing the boiling losses. This paper presents an experimental study on the effective thermal conductivities of the composite layered insulation with aerogel blankets($Cryogel^{(R)}$ Z and $Pyrogel^{(R)}$ XT-E) and Multi-layer insulation(MLI). The aerogel blankets are known as high porous materials and the good insulators within a soft vacuum range($10^{-3}{\sim}1$ Torr). Also, MLI is known as the best insulator within a high vacuum range(<$10^{-6}{\sim}10^{-3}$ Torr). A vertical axial cryogenic experimental apparatus was designed to investigate the thermal performance of the composite layered insulators under cryogenic conditions as well as consist of a cold mass tank, a heat absorber, annular vacuum space, and an insulators space. The composite insulators were laminated in the insulator space that height was 50 mm. In this study, the effective thermal conductivities of the materials were evaluated by measuring boil-off rate of liquid nitrogen and liquid argon in the cold mass tank.

• 한국전기전자재료학회논문지
• /
• 제22권7호
• /
• pp.584-588
• /
• 2009

Layered ZnS/$CaF_2$/ZnS/Cu film was deposited on glass substrate by using evaporation method. ZnS and $CaF_2$ were chosen as high and low refractive materials. Cu was used as mid-reflective layer. Reflectance with different optical thickness of $CaF_2$ ranging from $0.25{\lambda}\;to\;0.5{\lambda}$ were systematically investigated by using spectrophotometer. In order to expect the experimental results, the simulation program, the Essential Macleod Program(EMP) was adopted and compared with the experimental data. Based on the results taken by spectrophotometer, the ZnS/$CaF_2$/ZnS/Cu multi-layered thin film show the maximum reflectance of 80% at 625nm $(0.25{\lambda}\;in\;CaF_2)$ and 42% at 660nm $(0.5{\lambda}\;in\;CaF_2)$ respectively. As compared with the experimental results and simulation data, it was confirmed the experimental data is well matched with the EMP data.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2002년도 동계연구발표회 논문개요집
• /
• pp.24-25
• /
• 2002

Tthe structure and magnetic properties of Sm-Co/co films treated at various annealing temperatures and times are reported, The effects of an externally applied magnetic field during annealing, were also investigated. These result is discussed in terms of magnetization reversal of nano grains which seems to compete with the exchange interaction occurring between the nano grains. (omitted)

• Bulletin of the Korean Chemical Society
• /
• 제24권2호
• /
• pp.183-188
• /
• 2003

The micro-patterning of multi-layered thin films containing CdS and $Ta_2O_5$ layers on ITO substrate with various structures was successfully obtained by combining three different techniques: chemical solution depositions, sol-gel, and microcontact printing (μCP) methods using octadecyltrichlorosilane (OTS) as the organic thin layer template. $Ta_2O_5$ layer was prepared by sol-gel casting and CdS one obtained by chemical solution deposition, respectively. Parallel and cross patterns of multi-layers with $Ta_2O_5$ and CdS films were fabricated additively by successive removal of OTS layer pre-formed. This study presents the designed architectures consisting of the two types of feature having horizontal dimensions of 170 ㎛ and 340 ㎛ with constant thickness ca. 150 nm of each deposited materials. The thin film lay-out of the cross-patterning is composed of four regions with chemically different layer compositions, which are confirmed by Auger electron microanalysis.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1356-1358
• /
• 2003

In the paper, a method making use of the characteristics of Dyad Green Function (DGF) and Fluctuation-Dissipation Theorem to get the brightness temperature of layered medium is introduced. Based on the approach and the measured data of multi-channel radiometer and Least Square Method (LSM), the thickness of lunar soil can be retrieved. These methods are significant to study on materials on lunar surface.

• 폴리머
• /
• 제39권3호
• /
• pp.514-521
• /
• 2015

본 연구는 자동차, 건축, 디스플레이 부품 접합 등에 사용되는 다층구조형 양면 점착테이프에 대한 것으로 UV 경화에 의해 제조된 아크릴폼 기재에 용제 건조형 점착제(AD)를 양면에 붙이고 피착제 종류에 따른 박리강도와 전단접착강도를 고찰하였다. AD 종류와 기재 조성에 따른 접착력 변화 및 피착재로 사용한 플라스틱에 대한 접착력을 고찰한 결과, AD의 분자량(MW)이 증가할수록 박리강도 및 전단접착강도가 증가하였으나 약 65만 이상의 MW를 가진 AD는 접착력이 감소하는 거동을 보였다. 양면 점착테이프에 사용된 AD층 두께가 얇을수록 온도감소와 함께 높은 물성 값을 보였다. 기재와 AD와의 계면접합 특성은 MW 615000(AD-4)을 사용한 것이 가장 우수하였으며, MW가 615000보다 낮으면 기재인 아크릴 폼과의 계면이 분리되는 결과를 보였다. 따라서 본 연구에서 검토한 다층구조형 양면 점착테이프는 표면에너지가 낮은 플라스틱 부품 및 곡면 부위에 적용가능한 산업분야에 유용하게 사용될 수 있을 것으로 판단된다.

• 한국재료학회지
• /
• 제22권7호
• /
• pp.335-341
• /
• 2012

Recently, the demand for the miniaturization of printed circuit boards has been increasing, as electronic devices have been sharply downsized. Conventional multi-layered PCBs are limited in terms their use with higher packaging densities. Therefore, a build-up process has been adopted as a new multi-layered PCB manufacturing process. In this process, via-holes are used to connect each conductive layer. After the connection of the interlayers created by electro copper plating, the via-holes are filled with a conductive paste. In this study, a desmear treatment, electroless plating and electroplating were carried out to investigate the optimum processing conditions for Cu via filling on a PCB. The desmear treatment involved swelling, etching, reduction, and an acid dip. A seed layer was formed on the via surface by electroless Cu plating. For Cu via filling, the electroplating of Cu from an acid sulfate bath containing typical additives such as PEG(polyethylene glycol), chloride ions, bis-(3-sodiumsulfopropyl disulfide) (SPS), and Janus Green B(JGB) was carried out. The desmear treatment clearly removes laser drilling residue and improves the surface roughness, which is necessary to ensure good adhesion of the Cu. A homogeneous and thick Cu seed layer was deposited on the samples after the desmear treatment. The 2,2'-Dipyridyl additive significantly improves the seed layer quality. SPS, PEG, and JGB additives are necessary to ensure defect-free bottom-up super filling.

• Computers and Concrete
• /
• 제15권4호
• /
• pp.547-562
• /
• 2015

A two-dimensional multi-layered finite elements modeling of reinforced concrete structures at non-linear behaviour under monotonic and cyclical loading is presented. The non-linearity material is characterized by several phenomena such as: the physical non-linearity of the concrete and steels materials, the behaviour of cracked concrete and the interaction effect between materials represented by the post-cracking filled. These parameters are taken into consideration in this paper to examine the response of the reinforced concrete structures at the non-linear behaviour. Four examples of application are presented. The numerical results obtained, are in a very good agreement with available experimental data and other numerical models of the literature.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2004년도 춘계학술발표대회 및 제6회 신소재 심포지엄
• /
• pp.37-37
• /
• 2004

• 한국재료학회지
• /
• 제28권7호
• /
• pp.405-410
• /
• 2018

TiN and CrN thin films are among the most used coatings in machine and tool steels. TiN and CrN are deposited by arc ion plating(AIP) method. The AIP method inhibits the reaction by depositing a hard, protective coating on the material surface. In this study, the characteristics of multi-layer(TiN/CrN/TiN(TCT), CrN/TiN/CrN(CTC)) are investigated. For comparison, TiN with the same thickness as the multilayer is formed as a single layer and analyzed. Thin films formed as multilayers are well stacked. The characteristics of micro hardness and corrosion resistance are better than those of single layer TiN. The TiN/CrN peak is confirmed because both TCT and CTC are formed of the same component(TiN, CrN), and the phase is first grown in the (111) direction, which is the growth direction. However, the adhesion and abrasion resistance of the multilayer films are somewhat lower.