DOI QR코드

DOI QR Code

Adiabatic Performance of Layered Insulating Materials for Bulk LH2 Storage Tanks

대용량 액체 수소 저장탱크를 위한 다층단열재의 단열성능 분석

  • KIM, KYEONGHO (Graduate school of Mechanical Engineering, Korea University) ;
  • SHIN, DONGHWAN (Center for Urban Energy Research, Korea Institute of Science and Technology) ;
  • KIM, YONGCHAN (Department of Mechanical Engineering, Korea University) ;
  • KARNG, SARNG WOO (Center for Urban Energy Research, Korea Institute of Science and Technology)
  • 김경호 (고려대학교 기계공학과 대학원) ;
  • 신동환 (한국과학기술연구원 도시에너지연구단) ;
  • 김용찬 (고려대학교 기계공학과) ;
  • 강상우 (한국과학기술연구원 도시에너지연구단)
  • Received : 2016.11.04
  • Accepted : 2016.12.30
  • Published : 2016.12.30

Abstract

One of the most feasible solution for reducing the excessive energy consumption and carbon dioxide emission is usage of more efficient fuel such as hydrogen. As is well known, there are three viable technologies for storing hydrogen fuel: compressed gas, metal hydride absorption, and cryogenic liquid. In these technologies, the storage for liquid hydrogen has better energy density by weight than other storage methods. However, the cryogenic liquid storage has a significant disadvantage of boiling losses. That is, high performance of thermal insulation systems must be studied for reducing the boiling losses. This paper presents an experimental study on the effective thermal conductivities of the composite layered insulation with aerogel blankets($Cryogel^{(R)}$ Z and $Pyrogel^{(R)}$ XT-E) and Multi-layer insulation(MLI). The aerogel blankets are known as high porous materials and the good insulators within a soft vacuum range($10^{-3}{\sim}1$ Torr). Also, MLI is known as the best insulator within a high vacuum range(<$10^{-6}{\sim}10^{-3}$ Torr). A vertical axial cryogenic experimental apparatus was designed to investigate the thermal performance of the composite layered insulators under cryogenic conditions as well as consist of a cold mass tank, a heat absorber, annular vacuum space, and an insulators space. The composite insulators were laminated in the insulator space that height was 50 mm. In this study, the effective thermal conductivities of the materials were evaluated by measuring boil-off rate of liquid nitrogen and liquid argon in the cold mass tank.

Keywords

References

  1. D. R. Shin, "Importance of technical development for hydrogen fuel cell", ETIS analysis, Korea Institute of Energy Research, No. 23, 2003, pp. 1-5.
  2. J. O. Jensen, A. P. Vestbo, Q. Li and N. J. Bjerrum, "The energy efficiency of onboard hydrogen storage", Journal of Alloys and Compounds, Vol. 446-447, 2007, pp. 723-728. https://doi.org/10.1016/j.jallcom.2007.04.051
  3. Ministry of Environment, "Supply and market plan of fuel cell electric vehicle", 15th December, 2015, p. 5.
  4. M. Melaina and M. Penev, "Hydrogen station cost estimates: Comparison hydrogen station cost calculator results with other recent estimates (Tech Rep. No. NREL/TP-5400-56412)", National Renewable Energy Laboratory, September, 2013, pp. 21-24.
  5. S. D. Augustynowicz and J. E. Fesmire, "Cryogenic insulation system for soft vacuum", Advances in Cryogenic Engineering, Vol. 45, 2000, pp. 1691-1698.
  6. J. E. Fesmire, "Layered composite thermal insulation system for nonvacuum cryogenic applications", Cryogenics, Vol. 74, 2016, pp. 154-165. https://doi.org/10.1016/j.cryogenics.2015.10.008
  7. J. E. Fesmire, "Aerogel insulation systems for space launch applications", Cryogenics, Vol. 46, 2015, pp. 111-117.
  8. Aspen Aerogels, Inc., "Cryogel$^{(R)}$Z: Product data sheet", Retrieved August 3, 2016, from http://www.aerogel.com/_resources/common/userfiles/file/Data%20Sheets/Cryogel_Z_DS.pdf
  9. Aspen Aerogels, Inc., "Pyrogel$^{(R)}$XT-E: Product data sheet", Retrieved August 3, 2016, from http://www.aerogel.com/_resources/common/userfiles/file/Data%20Sheets/Pyrogel_XT-E_DS.pdf
  10. Lydall, Inc., "CRS WRAP$^{(R)}$: Product sheet", Retrieved October 31, 2016, from http://www.lydallpm.com/products/low-temperature-insulation/crs-wrap-superinsulating-media/product-sheets/
  11. L. J. Gibson and M. F. Ashby, "Cellular solids: Structure and properties 2nd edition", Cambridge University Press, 1997, p. 285.
  12. ASME, "ASME PTC 19.1-2005: Test uncertainty", ASME, New York.