• 제목/요약/키워드: Multi-class

검색결과 928건 처리시간 0.028초

접착제 도포후 오염된 표면의 처리방법에 따른 복합레진의 전단결합강도와 미세누출 (SHEAR BOND STRENGTH AND MICROLEAKAGE OF COMPOSITE RESIN ACCORDING TO TREATMENT METHODS OF CONTAMINATED SURFACE AFTER APPLYING A BONDING AGENT)

  • 박주식;이석종;문주훈;조영곤
    • Restorative Dentistry and Endodontics
    • /
    • 제24권4호
    • /
    • pp.647-656
    • /
    • 1999
  • The purpose of this study was to investigate the shear bond strength and marginal microleakage of composite to enamel and dentin according to different treatment methods when the applied bonding agent was contaminated by artificial saliva. For the shear bond strength test, the buccal and occlusal surfaces of one hundred twenty molar teeth were ground to expose enamel(n=60) and dentin surfaces(n=60). The specimens were randomly assigned into control and 5 experimental groups with 10 samples in each group. In control group, a bonding system(Scotchbond$^{TM}$ Multi-Purpose plus) and a composite resin(Z-100$^{TM}$) was bonded on the specimens according to manufacture's directions. Experimental groups were subdivided into 5 groups. After polymerization of an adhesive, they were contaminated with at artificial saliva on enamel and dentin surfaces: Experimental group 1 ; artificial saliva was dried with compressed air. Experimental group 2 ; artificial saliva was rinsed with air-water spray and dried. Experimental group 3 ; artificial saliva was rinsed, dried and applied an adhesive. Experimental group 4 ; artificial saliva was rinsed, dried, and then etched using phosphoric acid followed by an adhesive. Experimental group 5, artificial saliva was rinsed, dried, and then etched with phosphoric acid followed by consecutive application of both a primer and an adhesive. Composite resin(Z-100$^{TM}$) was bonded on saliva-treated enamel and dentin surfaces. The shear bond strengths were measured by universal testing machine(AGS-1000 4D, Shimaduzu Co. Japan) with a crosshead speed of 5mm/minute under 50kg load cell. Failure modes of fracture sites were examined under stereomicroscope. The data were analyzed by one-way ANOVA and Tukey's test. For the marginal microleakage test, Class V cavities were prepared on the buccal surfaces of sixty molars. The specimens were divided into control and experimental groups. Cavities in experimental group were contaminated with artificial saliva and those surfaces in each experimental groups received the same treatments as for the shear test. Cavities were filled with Z-100. Specimens were immersed in 0.5% basic fuchsin dye for 24 hours and embedded in transparent acrylic resin and sectioned buccolingually with diamond wheel saw. Four sections were obtained from the one specimen. Marginal microleakages of enamel and dentin were scored under streomicroscope and averaged from four sections. The data were analyzed by Kruskal-Wallis test and Fisher's LSD. The results of this study were as follows. 1. The shear bond strength to enamel showed lower value in experimental group 1(13.20${\pm}$2.94MPa) and experimental group 2(13.20${\pm}$2.94MPa) than in control(20.03${\pm}$4.47MPa), experimental group 4(20.96${\pm}$4.25MPa) and experimental group 5(21.25${\pm}$4.48MPa) (p<0.05). 2. The shear bond strength to dentin showed lower value in experimental group 1(9.35${\pm}$4.11MPa) and experimental group 2(9.83${\pm}$4.11MPa) than in control group(17.86${\pm}$4.03MPa), experimental group 4(15.04${\pm}$3.22MPa) and experimental group 5(14.33${\pm}$3.00MPa) (p<0.05). 3. Both on enamel and dentin surfaces, experimental group 1 and 2 showed many adhesive failures, but control and experimental group 3, 4 and 5 showed mixed and cohesive failures. 4. Enamel marginal microleakage was the highest in experimental group 1 and there was a significant difference in comparison with other groups (p<0.05). 5. Dentin marginal microleakages of experimental group 1 and 2 were higher than those of other groups (p<0.05). This result suggests that treatment methods, re-etching with 35% phosphoric acid followed by re-application of adhesive or repeating all adhesive procedures, will produce good effect on both shear bond strength and microleakage of composite to enamel and dentin if the polymerized bonding agent was contaminated by saliva.

  • PDF

상아질-레진 계면의 공초점 현미경적 형태 및 전단결합강도와의 관계 (CONFOCAL LASER SCANNING MICROSCOPIC MORPHOLOGY OF DENTIN-RESIN INTERFACE AND ITS RELATIONSHIP WITH SHEAR BOND STRENGTH)

  • 최낙원;조병훈;손호현
    • Restorative Dentistry and Endodontics
    • /
    • 제24권2호
    • /
    • pp.310-321
    • /
    • 1999
  • In this in vitro study, confocal laser scanning microscopic morphology of dentin-resin interface and its relationship to shear bond strength were investigated after the exposed dentin surfaces were treated with 3 different kinds of dentin adhesive systems[three-step; Scotchbond Multi-Purpose Plus(SMPP), self-priming bonding resin; Single Bond(SB), self-etching primer; Clearfil Liner Bond 2(LB2)]. 52 extracted human molar teeth without caries and/or restorations. The experimental teeth were randomly divided into three groups of seventeen teeth each. In five teeth of each group, class V cavities(depth: 1.5mm) with 900 cavosurface angles were prepared at the cementoenamel junction on buccal and lingual surfaces. Bonding resins of each dentin adhesive system were mixed with rhodamine B. Primer of SMPP was mixed with fluorescein. In group 1. the exposed dentin was conditioned with etchant, applied with above primer and bonding resin of SMPP. In group 2, with etchant and self-priming bonding agent of SB. In group 3, with self-etching primer and bonding agent of LB2. After treatment with dentin adhesive systems, composite resin were applied and photocured. The experimental teeth were cut longitudinally through the center line of restoration and grounded so that about $90{\mu}m$-thick wafers of buccolingually orientated dentin were obtained. And, $70{\sim}80{\mu}m$-thick wafers sectioned horizontally, thus presenting a dentinal tubules at 900 to the cut surface of a remaining tooth, were obtained. Primer of SMPP mixed with rhodamine B was applied to these wafers. Confocal laser scanning microscopic investigations of these wafers were done within of 24 hours after treatment. To measure shear bond strength, the remaining twelve teeth of each group were grounded horizontally below the dentinoenamel junction, so that no enamel remained. After applying dentin adhesive systems on the dentin surface, composite was applied in the shape of cylinder. The cylinder was 5mm in diameter, and 2mm in thickness. Shear bond strength was measured using Instron with a cross-head speed of 0.5mm/min. It was concluded as follows ; 1. Hybrid layer of SMPP(mean: $4.56{\mu}m$) was thicker than that of any other groups. This value was not statistically significant thicker than that of SB(mean: $3.41{\mu}m$, p>0.05), and significant thicker than that of LB2(mean: $1.56{\mu}m$, p<0.05). There was a statistical difference between SB and LB2(p<0.05). 2. Although there were variations in the length of resin tag even in a sample, and in a group, most samples in SMPP and SB showed resin tags extending above $20{\mu}m$. But samples in LB2 showed resin tags of $10{\mu}m$ at best. 3. Besides primer's infiltration into demineralized peritubular dentin and dentinal tubules, fluorophore of primer was detected in the lateral branches of dentinal tubules. 4. All groups demonstrated statistically significant differences from one another(p<0.05), with shear bond strengths given in descending order as follows: SMPP(18.3MPa), SB(16.0MPa) and LB2(12.4MPa). 5. LB2 having thinnest hybrid layer($1.56{\mu}m$) showed the lowest shear bond strength(12.4MPa).

  • PDF

접착강화제 도포후 인공타액에 오염된 표면의 처리방법에 따른 복합레진의 번연누출과 전단결합강도 (MARGINAL MICROLEAKAGE AND SHEAR BOND STRENGTH OF COMPOSITE RESIN ACCORDING TO TREATMENT METHODS OF ARTIFICIAL SALIVA-CONTAMINATED SURFACE AFTER PRIMING)

  • 조영곤;고기종;이석종
    • Restorative Dentistry and Endodontics
    • /
    • 제25권1호
    • /
    • pp.46-55
    • /
    • 2000
  • During bonding procedure of composite resin, the prepared cavity can be contaminated by saliva. In this study, marginal microleakage and shear bond strength of a composite resin to primed enamel and dentin treated with artificial saliva(Taliva$^{(R)}$) were evaluated. For the marginal microleakage test, Class V cavities were prepared in the buccal surfaces of fifty molars. The samples were randomly assigned into 5 groups with 10 samples in each group. Control group was applied with a bonding system (Scotchbond$^{TM}$ Multi-Purpose plus) according to manufacture's directions without saliva contamination. Experimental groups were divided into 4 groups and contaminated with artificial saliva for 30 seconds after priming: Experimental 1 group ; artificial saliva was dried with compressed air only, Experimental 2 group ; artificial saliva was rinsed and dried. Experimental 3 group ; cavities were etched with 35% phosphoric acid for 15 seconds after rinsing and drying artificial saliva. Experimental 4 group ; cavities were etched with 35% phosphoric acid for 15 seconds and primer was reapplied after rinsing and drying artificial saliva. All the cavities were applied a bonding agent and filled with a composite resin (Z-100$^{TM}$). Specimens were immersed in 0.5% basic fuschin dye for 24 hours and embedded in transparent acrylic resin and sectioned buccolingually with diamond wheel saw. Four sections were obtained from one specimen. Degree of marginal leakage was scored under stereomicroscope and their scores were averaged from four sections. The data were analyzed by Kruscal-Wallis test and Fisher's LSD. For the shear bond strength test, the buccal or occlusal surfaces of one hundred molar teeth were ground to expose enamel(n=50) or dentin(n=50) using diamond wheel saw and its surface was smoothed with Lapping and Polishing Machine(South Bay Technology Co., U.S.A.). Samples were divided into 5 groups. Treatment of saliva-contaminated enamel and dentin surfaces was same as the marginal microleakage test and composite resin was bonded via a gelatin capsule. All specimens were stored in distilled water for 48 hours. The shear bond strengths were measured by universal testing machine (AGS-1000 4D, Shimaduzu Co., Japan) with a crosshead speed of 5 mm/minute. Failure mode of fracture sites was examined under stereomicroscope. The data were analyzed by ANOVA and Tukey's studentized range test. The results of this study were as follows : 1. Enamel marginal microleakage showed no significant difference among groups. 2. Dentinal marginal microleakages of control, experimental 2 and 4 groups were lower than those of experimental 1 and 3 groups (p<0.05). 3. The shear bond strength to enamel was the highest value in control group (20.03${\pm}$4.47MPa) and the lowest value in experimental 1 group (13.28${\pm}$6.52MPa). There were significant differences between experimental 1 group and other groups (p<0.05). 4. The shear bond strength to dentin was higher in control group (17.87${\pm}$4.02MPa) and experimental 4 group (16.38${\pm}$3.23MPa) than in other groups, its value was low in experimental 1 group (3.95${\pm}$2.51 MPa) and experimental 2 group (6.72${\pm}$2.26MPa)(p<0.05). 5. Failure mode of fractured site on the enamel showed mostly adhesive failures in experimental 1 and 3 groups. 6. Failure mode of fractured site on the dentin did not show adhesive failures in control group, but showed mostly adhesive failure in experimental groups. As a summary of above results, if the primed tooth surface was contaminated with artificial saliva, primer should be reapplied after re-etching it.

  • PDF

위천 상류에 건설 중인 화북댐 상 하류 어류군집에 관한 연구 (A Study of Fish Community on Up and Downstream of Hwabuk Dam Under Construction in the Upper Wie Stream.)

  • 서진원;김희성
    • 생태와환경
    • /
    • 제42권2호
    • /
    • pp.260-269
    • /
    • 2009
  • 본 조사는 낙동강 유역의 홍수피해를 저감하고, 경북 중부지역의 안정적인 용수를 공급하기 위해 경북 군위군 고로면에 건설 중인 화북댐의 상 하류 어류조사를 통하여 댐 건설이 하천유역에 특히 수 생태계내의 어류군집에 미치는 영향유무를 파악하여 종 다양성을 보전하고 하천의 건강성을 유지하기 위한 기초자료로 활용하고자 하였다. 화북댐 상 하류에서 사후환경영향조사 기간(2004${\sim}$2008년) 중 측정된 수질항목 분석결과 현장에서 측정한 수온, 용존산소, 수소이온농도와 실내분석 항목인 부유물, 총대장균수의 경우 지점별로 다소 계절에 따른 변화를 나타냈지만 큰 차이를 보이지는 않았으나 유기물 및 영영염류 농도에 해당하는 생물학적 화학적 산소요구량, 엽록소, 질소, 인의 경우 지점별로 매우 큰 폭의 변화를 보였으며 상류에서 다소 높고 하류에서 낮은 경향을 보였다. 중금속 중 비소의 경우 2005년 6월 0.092 mg $L^{-1}$를 제외하고는 0.05 mg $L^{-1}$ 이하를 나타내어 하천수 수질환경기준 상 사람의 건강 보호 측면에서 규정한 0.05 mg $L^{-1}$ 이하의 범위 내에서 나타나는 것으로 확인되었다. 화북댐 상 하류에서 어류조사를 실시한 결과 총 7과 19종 10,263개체가 확인되었다. 조사된 어류 중 우점종은 하천 중 상류에 주로 서식하는 참갈겨니(62.5%)로 확인되었으며 아우점종은 버들치(10.6%)로 나타났다. 조사 구간인 위천 상류에서 확인된 19종 중 한국고유종은 긴몰개, 동사리, 쉬리 등 총 9종(47.4%)으로 나타났으며, 멸종위기야생동 식물 I급으로 지정된 얼룩새코미꾸리(Koreocobitis naktongensis)가 소수의 개체이지만 포획되었고, 외래도입종은 확인되지 않았다. 군집분석 결과 우점도 지수는 하류로 갈수록 감소한 반면에 다양도, 풍부도 지수는 하류로 갈수록 증가하였다. 우점종인 참갈겨니의 개체군 분석 결과, 길이-무게 상관관계식은 TW=0.000003$(TL)^{3.2603}$로서 매개변수 b값이 3.0보다 크게 나타나 개체군의 영양상태가 양호한 것으로 나타났다. 또한 유사시기에 다른 하천에서의 개체군들과 비교분석 결과 size별 평균 비대지수(CF)가 상대적으로 높은 값을 보여 화북댐 유역의 참갈겨니가 다른 지역보다 성장률이 높았다. 화북댐 상 하류에서 어류 조사 자료를 활용하여 하천건강성평가(IBI)를 적용한 결과, 대부분의 지점에서 양호(26${\sim}$35)에서 최적(36${\sim}$40)을 보였으며 지점 5에서 평균값이 가장 높게 나타냈다. 이러한 결과를 바탕으로 지속적인 모니터링을 실시하여 어류에 관한 환경영향평가와 하천건강성평가 등을 통한 화북댐 완공 후 상 하류 하천의 어류상 변화유무 및 환경영향을 파악하는데 도움이 될 것으로 사료된다.

인도네시아 현대미술에 있어서의 설치미술 - 미디엄과 사회적 공간을 위한 탐색 (Installation Art In Indonesian Contemporary Art; A Quest For Medium and Social Spaces)

  • A. 릭릭 쿠스마라
    • 미술이론과 현장
    • /
    • 제5호
    • /
    • pp.217-229
    • /
    • 2007
  • Many historical research and facet about modern art in Indonesia which formulating background of contemporary Indonesian Art. Indonesian art critic Sanento Yuliman states that Modern art has been rapidly developing in Indonesia since the Indonesian Independence in 1945. Modern Art is a part of the super culture of the Indonesian metropolitan and is closely related to the contact between the Indonesian and Western Cultures. Its birth was part of the nationalism project, when the Indonesian people consists of various ethnics were determined to become a new nation, the Indonesian nation, and they wished for a new culture, and therefore, a new art. The period 1960s, which was the beginning of the creation and development of the painters and the painters associations, was the first stage of the development of modern art in Indonesia. The second stage showed the important role of the higher education institutes for art. These institutes have developed since the 1950s and in the 1970s they were the main education institutes for painters and other artists. The artists awareness of the medium, forms or the organization of shapes were encouraged more intensely and these encouraged the exploring and experimental attitudes. Meanwhile, the information about the world's modern art, particularly Western Art; was widely and rapidly spread. The 1960s and 1970s were marked by the development of various abstractions and abstract art and the great number of explorations in various new media, like the experiment with collage, assemblage, mixed media. The works of the Neo Art Movement-group in the second half of the 1970s and in the 1980s shows environmental art and installations, influenced by the elements of popular art, from the commercial world and mass media, as well as the involvement of art in the social and environmental affairs. The issues about the environment, frequently launched by the intellectuals in the period of economic development starting in the 1970s, echoed among the artists, and they were widened in the social, art and cultural circles. The Indonesian economic development following the important change in the 1970s has caused a change in the life of the middle and upper class society, as has the change in various aspects of a big city, particularly Jakarta. The new genre emerged in 1975 which indicates contemporary art in Indonesia, when a group of young artists organized a movement, which was widely known as the Indonesian New Art Movement. This movement criticized international style, universalism and the long standing debate on an east-west-dichotomy. As far as the actual practice of the arts was concerned the movement criticized the domination of the art of painting and saw this as a sign of stagnation in Indonesian art development. Based on this criticism 'the movement' introduced ready-mades and installations (Jim Supangkat). Takes almost two decades that the New Art Movement activists were establishing Indonesian Installation art genre as contemporary paradigm and influenced the 1980's gene ration like, FX Harsono, Dadang Christanto, Arahmaiani, Tisna Sanjaya, Diyanto, Andarmanik, entering the 1990's decade as "rebellion period" ; reject towards established aesthetic mainstream i.e. painting, sculpture, graphic art which are insufficient to express "new language" and artistic needs especially to mediate social politic and cultural situation. Installation Art which contains open possibilities of creation become a vehicle for aesthetic establishment rejection and social politics stagnant expression in 1990s. Installation art accommodates two major field; first, the rejection of aesthetic establishment has a consequences an artists quest for medium; deconstruction models and cross disciplines into multi and intermedia i.e. performance, music, video etc. Second aspect is artists' social politic intention for changes, both conclude as characteristics of Indonesian Installation Art and establishing the freedom of expression in contemporary Indonesian Art until today.

  • PDF

향신식물의 잔류농약 실태조사 (Monitoring of Pesticide Residues on Herbs and Spices)

  • 배호정;김운호;정유정;이유나;문경은;김정선;채경석;이진희;도영숙;최옥경
    • 한국식품위생안전성학회지
    • /
    • 제36권5호
    • /
    • pp.392-399
    • /
    • 2021
  • 본 연구는 2020년 1월부터 10월까지 향신식물 114건을 수거하여 잔류농약 실태조사를 실시하였다. GC-MSMS, GC-ECD, GC-NPD, LC-MSMS, LC-PDA, LC-CAS를 이용하여 다종농약 다성분분석법으로 잔류농약 341종을 분석하였다. 조사 결과 36건의 검출이 있었으며 검출률은 31.6%이었다. 이 중 7건은 농약 잔류허용기준을 초과하였으며 부적합률은 6.1%이었다. 농약 잔류허용기준을 초과한 품목은 고수(2건), 민트(2건), 바질(1건), 로즈마리(1건), 서양자초(1건)이었다. 잔류농약 341종을 분석한 결과 22종의 농약 성분이 52회 검출되었고 농약 잔류허용기준을 초과한 성분은 8종이었다. 농약 잔류허용기준을 초과한 성분은 etofenprox, flufenoxuron, fluquinconazole, iprodione, lufenuron, paclobutrazol, phenthoate, spiromesifen 이었다.

Organizing an in-class hackathon to correct PDF-to-text conversion errors of Genomics & Informatics 1.0

  • Kim, Sunho;Kim, Royoung;Nam, Hee-Jo;Kim, Ryeo-Gyeong;Ko, Enjin;Kim, Han-Su;Shin, Jihye;Cho, Daeun;Jin, Yurhee;Bae, Soyeon;Jo, Ye Won;Jeong, San Ah;Kim, Yena;Ahn, Seoyeon;Jang, Bomi;Seong, Jiheyon;Lee, Yujin;Seo, Si Eun;Kim, Yujin;Kim, Ha-Jeong;Kim, Hyeji;Sung, Hye-Lynn;Lho, Hyoyoung;Koo, Jaywon;Chu, Jion;Lim, Juwon;Kim, Youngju;Lee, Kyungyeon;Lim, Yuri;Kim, Meongeun;Hwang, Seonjeong;Han, Shinhye;Bae, Sohyeun;Kim, Sua;Yoo, Suhyeon;Seo, Yeonjeong;Shin, Yerim;Kim, Yonsoo;Ko, You-Jung;Baek, Jihee;Hyun, Hyejin;Choi, Hyemin;Oh, Ji-Hye;Kim, Da-Young;Park, Hyun-Seok
    • Genomics & Informatics
    • /
    • 제18권3호
    • /
    • pp.33.1-33.7
    • /
    • 2020
  • This paper describes a community effort to improve earlier versions of the full-text corpus of Genomics & Informatics by semi-automatically detecting and correcting PDF-to-text conversion errors and optical character recognition errors during the first hackathon of Genomics & Informatics Annotation Hackathon (GIAH) event. Extracting text from multi-column biomedical documents such as Genomics & Informatics is known to be notoriously difficult. The hackathon was piloted as part of a coding competition of the ELTEC College of Engineering at Ewha Womans University in order to enable researchers and students to create or annotate their own versions of the Genomics & Informatics corpus, to gain and create knowledge about corpus linguistics, and simultaneously to acquire tangible and transferable skills. The proposed projects during the hackathon harness an internal database containing different versions of the corpus and annotations.

건조농산물의 잔류농약 안전성 조사 (A Safety Survey on Pesticide Residues in Dried Agricultural Products)

  • 이효경;오문석;정진아;김기유;이성봉;김한택;강향리;손지희;이윤미;이미경;이병훈;김지원;박용배
    • 한국식품위생안전성학회지
    • /
    • 제34권4호
    • /
    • pp.340-347
    • /
    • 2019
  • 본 연구에서는 건조농산물의 잔류농약 안전성 조사를 위해 경기도에서 유통되는 건조농산물 110건을 수거하여 다종농약다성분 분석법으로 잔류농약 263종을 검사하였다. 조사 결과 총 10건의 시료에서 10종의 잔류농약이 검출되었으며, 건피마자에서 chlorpyrifos, 건취나물에서 chlorpyrifos, hexaconazole, pyridalyl, 무시래기에서 diniconazole, isoprothiolane, lufenuron, 건곤드레에서 hexaconazole, 건고춧 잎에서 bifenthrin, chlorothalonil, boscalid, pyraclostrobin이 각각 검출되었다. 검출률은 9.1%였으며, 이 중 건피마자 1건에서 chlorpyrifos가 잔류허용기준을 초과하였고 부적합률은 0.9%로 나타났다. 유효성 검증 실험 결과 검출한계(LOD)는 0.002~0.027 mg/kg, 정량한계(LOQ)는 0.006~0.083 mg/kg으로 나타났으며, 결정계수($R^2$)는 0.9964~1.0000으로 나타났다. 회수율은 전반적으로 74.8~118.9%로 나타났다. 2019년부터 PLS가 시행됨에 따라 농산물에 대한 안전성 관리가 강화되었지만 건조농산물의 경우 잔류허용기준이 미비하기 때문에 본 연구는 향후 기준 설정을 위한 기초자료로 제공하고자 한다.