• Korean Journal of Optics and Photonics
• /
• v.34 no.1
• /
• pp.1-12
• /
• 2023

In this study, we propose a hybrid phase-control algorithm for multi-channel coherent beam combining (CBC) system by combining the covariant matrix adaption evolution strategy (CMA-ES) and stochastic parallel gradient descent (SPGD) algorithms and analyze its operational performance. The proposed hybrid CMA-ES/SPGD algorithm is a sequential process which initially runs the CMA-ES algorithm until the combined final output intensity reaches a preset interim value, and then switches to running the SPGD algorithm to the end of the whole process. For ideal 7-channel and 19-channel all-fiber-based CBC systems, we have found that the mean convergence time can be reduced by about 10% in comparison with the case when the SPGD algorithm is implemented alone. Furthermore, we analyzed a more realistic situation in which some additional phase noise was introduced in the same CBC system. As a result, it is shown that the proposed algorithm reduces the mean convergence time by about 17% for a 7-channel CBC system and 16-27% for a 19-channel system compared to the existing SPGD alone algorithm. We expect that for implementing a CBC system in a real outdoor environment where phase noise cannot be ignored, the hybrid CMA-ES/SPGD algorithm proposed in this study will be exploited very usefully.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.6
• /
• pp.931-937
• /
• 2004

Simultaneous filling is a goal in plastic injection mold that has multi cavities. The moldings which have not been filled at the same time have undesired faults such as dimension inaccuracy, residual stress, law mechanical strength, etc. The best way to simultaneous fill is to be injected in a geometrically balanced runner system. In a general processing, however, in balanced runner system mold, filling imbalance would be observed in cavities. These phenomena result from molten polymer's characteristics and circumstances in balanced runner. In this study, the degree of filling imbalance (DFI) was defined for showing rate of filling imbalance in geometrically balanced injection mold that has 8 cavities. Before the main experiment, an injection molding simulation was conducted to know a pattern of filling imbalance with Moldflow software. There were somewhat differences between results of experiment and simulation about the filling imbalance. The reason for the difference was that the software have not concerned about a situation in a real flow channel. It was also investigated how the injection speed affected on filling imbalance in the experiment.

• 한국HCI학회:학술대회논문집
• /
• 2008.02b
• /
• pp.179-184
• /
• 2008

Changed TV, that has multi-channel and interactive attribute, requires viewer's activity. Also, broadcasting environment and TV user interface require same things equally. But, the viewer feels uncomfortable in current situation because they recognize the TV as passive media. especially, TV interface can't overcome limitation of TV media. And such interface is provided as it is. This problem brings viewer's confusion and dissatisfaction more and more. This study raises a question about viewer's activity and satisfaction, analyzes the relation and effect between activity and satisfaction.

• Journal of Distribution Science
• /
• v.20 no.3
• /
• pp.95-106
• /
• 2022

Purpose: This study aims to verify the effects of omnichannel characteristics on pleasure, resistance and repurchase intention in the omnichannel situation in order to provide the innovative commercial business. Research design, data and methodology: The study examined relations between research concepts centered on previous studies, set hypotheses, developed a research model, and verified the model through a questionnaire survey. A total of 297 questionnaires were used for the final analysis, excluding the questionnaires showing insincere or outliers. Results: First, Omnichannel showed multi-dimensional characteristics consisting of consistency, innovation, economy, and integration. Second, innovation and economic feasibility had a positive effect on pleasure. Third, only economic feasibility had a negative effect on user resistance. Fourth, consumers' shopping pleasure had a negative effect on user resistance. Fifth, repurchase intention of consumers was positively affected by innovation. Conclusions: This research contributed to extend academic framework of distribution research by examining causal relationship through adoption of economic and innovation factors as new characteristics from the integrated perspective beyond the research frame of the existing omnichannel distribution environment. Companies should provide meaningful experiences by resolving concerns about side effects caused by human-computer interaction and providing smart information that matches the products most suitable for consumer needs.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.2
• /
• pp.160-168
• /
• 2013

In tactical environment, tactical wireless networks are generally comprised of Tactical MANETs(T-MANETs) or Tactical WMNs(T-WMNs). The most important services in tactical network are voice and low rate data such as command control and situation awareness. These data should be forwarded via multi-hop in tactical wireless networks. Urgent and mission-critical data should be protected in this environment, so QoS(Quality of Service) must be guaranteed for specific type of traffic for satisfying the requirement of a user. In IEEE 802.11s, TDMA-based MAC protocol, MCCA(MCF Controlled Channel Access), has a function of resource reservation. But 802.11s protocol can not guarantee the end-to-end QoS, because it only supports reservation with neighbors. In this paper, we propose the routing protocol, R-HWMP(Reservation-based HWMP) which has the resource reservation to support the end-to-end QoS. The proposed protocol can reserve the channel slots and find optimal path in T-WMNs. We analyzed the performance of the proposed protocol and showed that end-to-end QoS is guaranteed using NS-2 simulation.

• Journal of Digital Convergence
• /
• v.12 no.1
• /
• pp.263-271
• /
• 2014

Era of multi-channel digital multimedia on the Internet, cable, satellite and IPTV and the growth of new media such as terrestrial broadcast advertising with the poor rating has also dropped sharply. In this situation, terrestrial TV suggesting the introduction of in-program advertising appearing comments. In this study, the introduction of these intermediate advertising the public and professional awareness about the issue by comparing the introduction of in-program advertising feasibility was done in the purpose. Studies on terrestrial TV suggesting the introduction of in-program advertising and public opinion about the differences in perception between experts is high. The introduction of in-program advertising validity of these data for future in-program advertising to provide a basis for enforcement is expected to give.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.3 s.76
• /
• pp.46-51
• /
• 2007

A multi-purpose environmental monitoring system has been developed as a commercially available standard using the technique of hetero-core spliced fiber optic sensors, for the purposes of monitoring large-scale structures and preserving natural environments. The monitoring system has been tested and evaluated in a possible outdoor condition, in view of the full-scale operation at actual sites to be monitored. Additionally, the developed system in this work conveniently provides us with various options of sensor modules intended for monitoring such physical quantities as displacement, distortion, pressure, binary states, and liquid adhesion. Two channels of optical fiber line were monitored in each channel, three displacement sensor modules were connected in series, in order to examine the performance to a pseudo-cracking experiment in the outdoor situation and to clarify temperature influences an the system, in terms of the coupling of optical connectors and the OTDR stability. The results from the pseudo-cracking experiment agreed with the actual cracks, by means of calculation, based an the detected displacement values and their geometrical arrangement of the used sensor modules. The temperature change, ranging from 10 to $20^{\circ}C$ resulting from the 10-days free running operation, was found to influence the system stability of ${\pm}10{\mu}m$, primarily due to the coupling instability of the used optical connectors. It was found that fusion splicing, rather than the use of connectors, reduced the fluctuation dawn to ${\pm}2{\mu}m$. The specification and performance of various option modules have been demonstrated to show the capability of inspecting various physical quantities by use of the single system, which would be suitable for multi-purpose environmental monitoring.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.96-107
• /
• 2015

VANET technologies provide real-time traffic information for mitigating traffic jam and preventing traffic accidents, as well as in-vehicle infotainment service through Telematics/Intelligent Transportation System (ITS). Due to the rapid increasement of various requirements, the vehicle communication with a limited resource and the fixed frame architecture of the conventional techniques is limited to provide an efficient communication service. Therefore, a new flexible operation depending on the surrounding situation information is required that needs an adaptive design of the network architecture and protocol for efficiently predicting, distributing and sharing the context-aware information. In this paper, Vehicle-to-Infrastructure (V2I) based on communication between vehicle and a Road Side Units (RSU) and Vehicle-to-Vehicle (V2V) based on communication between vehicles are effectively combined in a new MAC architecture and V2I and V2V vehicles collaborate in management. As a result, many vehicles and RSU can use more efficiently the resource and send data rapidly. The simulation results show that the proposed method can achieve high resource utilization in accordance. Also we can find out the optimal transmission relay time and 2nd relay vehicle selection probability value to spread out V2V/V2I collaborative schedule message rapidly.

• Asia pacific journal of information systems
• /
• v.18 no.1
• /
• pp.1-23
• /
• 2008

As managing customer relationship gets more important, companies are strengthening information service using multi-channels to their customers as a part of their customer relationship management (CRM) initiatives. It means companies are now accepting such information services not as simple information -delivering tools, but as strategic initiatives for acquiring and maintaining customer loyalty. In this paper, we attempt to validate whether or not such various information services would impact on organizational performance in terms of CRM strategy. More specifically, our research objective is to answer the next three questions: first, how to construct the instruments to measure not information quality but information service quality?; second, which attributes of information service quality can influence corporate image and customer loyalty?; finally, does each information service type have unique characteristics compared with others in terms of influencing corporate image and customer loyalty? With respect to providing answers to those questions, the previous studies had been limited in that those studies failed to consider the variety of types of information service or restricted the quality of information service to information quality. An appropriate research model answering the above questions should consider the fact that most companies are utilizing multi channels for their information services, and include the recent strategic information service such as customer online community. Moreover, since corporate information service could be regarded as a type of products or services delivered to customer, it is necessary to adopt the criteria for assessing customer's perceived value when to measure the quality of information service. Therefore, considering both multi-channels and multi-traits may enable us to tell the detailed causal routes showing which quality attributes of which information service would affect corporate image and customer loyalty. As information service channels, we include not only homepage and DM (direct mail), which are the most frequently applied information service channels, but also online community, which is getting more strategic importance in recent years. With respect to information service quality, we abstract information quality, convenience of information service, and timeliness of information service through a wide range of relevant literature reviews. As our dependant variables, we consider corporate image and customer loyalty that both of them are the critical determinants of organizational performance, and also attempt to grasp the relationship between the two constructs. We conducted a huge online survey at the homepage of one of representative dairy companies in Korea, and gathered 367 valid samples from 407 customers. The reliability and validity of our measurements were tested by using Cronbach's alpha coefficient and principal factor analysis respectively, and seven hypotheses were tested through performing correlation test and multiple regression analysis. The results from data analysis demonstrated that timeliness and convenience of homepage have positive effects on both corporate image and customer loyalty. In terms of DM, its' information quality was represented to influence both corporate image and customer loyalty, but we found its' convenience have a positive effect only on corporate image. With respect to online community, we found its timeliness contribute significantly both to corporate image and customer loyalty. Finally, as we expected, corporate image was revealed to provide a great influence to customer loyalty. This paper provides several academic and practical implications. Firstly, we think our research reinforces CRM literatures by developing the instruments for measuring information service quality. The previous relevant studies have mainly depended on the measurements of information quality or service quality which were developed independently. Secondly, the fact that we conducted our research in a real situation may enable academics and practitioners to understand the effects of information services more clearly. Finally, since our study involved three different types of information service which are most frequently applied in recent years, the results from our study might provide operational guidelines to the companies that are delivering their customers information by multi-channel. In other words, since we found that, in terms of customer loyalty, the key areas would be different from each other according to the types of information services, our analysis would help to make decisions such as selecting strengthening points or allocating resources by information service channels.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.7
• /
• pp.692-697
• /
• 2004

OFDM system is very useful for the multi-path channel and highly bandwidth-efficient system. However, OFDM signal shows the high PAPR so that nonlinear distortion can happen in the HPA(high power amplifier). This paper studies BER performance variation according to IBO(input back off) values when the predistorter is used fur the compensation for the HPA nonlinearity. In case of the SSPA(solid state power amplifier) of nonlinearity parameter p=0.5 and IBO=0㏈, the system with predistorter is poorer than the one without predistorter. But this situation is inverted, if IBO is increased from 0㏈ to 3㏈. So, we can find that there is a threshold value of IBO for the predistorter to effectively compensate for the nonlinear SSPA when the sub-carrier number and p value are changed.