• Journal of Electrical Engineering and Technology
• /
• v.12 no.2
• /
• pp.944-949
• /
• 2017

Recently, the demand of maglev systems in the manufacturing industry for LCD and OLED display panels, which are required to be very clean and possess vacuum systems, has been increasing due to their characteristics such as being non-contact, noise free and eco-friendly. However, it is still a challenge to simultaneously control both the propulsion and levitation for their interactive effect difficult to be exactly measured. In this paper, we proposed a new tuning method for controlling the magnetic levitation force robustly against the levitation disturbance caused by a propulsion system, based on LQ servo optimal control. The disturbance torque of the LSM propulsion system is calculated through FEM analysis in such a way that the LQ servo controller is determined in order to minimize the effect of the disturbance. The robust performance of the proposed LQ servo control method for the in-track type magnetic levitation systems is demonstrated via simulations and experiments.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.1821-1834
• /
• 2017

Medium voltage control applications due to obtain better output voltage and reduced electro-magnetic interference multi level inverter is used. In closed loop control with inverter, the PI controller does not operate satisfactorily when the operating point changes. This paper presents the performance of Co-Efficient diagram PI controller based indirect vector controlled induction motor drive fed from three-level inverter under different operating conditions (dynamic and steady state). The proposed Co-Efficient diagram PI controller based three level inverter significantly reduces the torque ripple compared to that of conventional PI controller. The performance of the indirect vector controlled induction motor drive has been simulated at different operating conditions. For three-level inverter control, a simplified space vector modulation technique is implemented, which reduces the coordinate transformations complications in the algorithms. The performance parameters, torque ripple contents and THD of induction motor drive with three-level inverter is compared under different operating conditions using CDM-PI and conventional PI controllers.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.1
• /
• pp.61-64
• /
• 2001

VCO(Voltage Contolled Oscillator) is one of the main components governing the size, performance and power consumption of telecommunication devices. As the devices become much smaller, YCO need to hove much smaller size with better characteristics. Buried type passive components of L, C, R were developed previously and the structure of these components are good for minimizing the size of VCO. Our own library of passive components is used in simulation and measurement circuit designed by ourselve. In structure of multi-layered VCO, some components governing the characteristics of VCO are selected and placed on the top of oscilltor for the good tuning process. In resonator part, the stripline structure and low loss glass/ceramic material are used to get higher Q value. In our research, a VCO oscillates in the 2.3~2.36 GHz band is developed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.135-138
• /
• 2002

VCO(Voltage Controlled Oscillator) is one of the main components governing the size, performance and power consumption of telecommunication devices. As the devices become much smaller, VCO need to have much smaller size with better characteristics. Buried type passive components of L,C,R were developed previously and the structure of these components are good for minimizing the size of VCO. Our own library of passive components is used in simulation and fabrication of VCO circuit, and surface mounted components like varactor diode are analysed using the measurement circuit designed by ourselves. Two-Dimensional simulation of VCO circuit and local three-Dimensional structure simulation are performed and their relation is obtained. In structure of multi-layered VCO, some components governing the characteristics of VCO are selected and placed on the top of oscillator for the good tuning process. In resonator part, the stripline structure and low loss glass/ceramic material are used to get higher Q value. In our research, a VCO oscillates in the 2.3∼2.36 GHz band is developed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04b
• /
• pp.57-60
• /
• 2002

In generally, the guest-emitter doped system has been reported to give a bright electroluminescence(EL). The purpose of using doped system is to improve for increasing lifetime and efficiency, and tuning multicolor light. This indicates an enhanced electron-hole recombination rate in emitting layer. The purpose of this study is to obtain the high performance EL devices for flat panel display with red emission. We fabricated EL devices using the guest-host system. where DCM derivatives were taken as a dopant. The devices are fabricated in multilayer system with various concentration of the dopant (red light emitting dye). We measured the I-V characteristics and EL spectra from these devices. and we compared with photoluminescence(PL) quantum yield among the DCM derivatives. The emission mechanism of devices is participated in energy transfer. The energy transfer from these hosts to DCM generates luminescence spectra that vary from yellow red to red, depending on DCM derivatives. Absorption and emission spectra of organic materials composing the devices depend on the emission materials doped with the DCM derivatives. We demonstrated that the high EL efficiency can be achieved by doping host material with DCM derivatives and molecular steric structures

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1312-1315
• /
• 2002

This research describes the design of a fully integrated fractional-N frequency synthesizer intended for the local oscillator in IMT-2000 system using 0.18-$\mu\textrm{m}$ CMOS technology and 1.8-V single power supply. The designed fractional-N synthesizer contains following components. Modified charge pump uses active cascode transistors to achieve the high output impedance. A multi-modulus prescaler has modified ECL-like D flip-flop with additional diode-connected transistors for short transient time and high frequency operation. And phase-frequency detector, integrated passive loop filter, LC-tuned VCO having a tuning range from 1.584 to 2.4 ㎓ at 1.8-V power supply, and higher-order sigma-delta modulator are contained. Finally, designed frequency synthesizer provides 5 ㎒ channel spacing with -122.6 dBc/Hz at 1 ㎒ in the WCDMA band and total output power is 28 mW.

• ETRI Journal
• /
• v.39 no.3
• /
• pp.390-397
• /
• 2017

In this paper, we propose a scheme for designing a tunable pixel layer based on a $Ge_2Sb_2Te_5$ (GST) alloy thin film. We show that the phase change of GST can significantly affect the reflection characteristic when the GST film is embedded into a dielectric encapsulation layer. We investigate the appropriate positions of the GST film within the dielectric layer for high diffraction efficiency, and we prove that they are antinodes of Fabry-Perot resonance inside the dielectric layer. Using the proposed scheme, we can increase the diffraction efficiency by about ten times compared to a bare GST film pixel, and 80 times for the first-to-zeroth-order diffraction power ratio. We show that the proposed scheme can be designed alternatively for a broadband or wavelength-selective type by tuning the dielectric thickness, and we discuss a multi-phase example with a double-stack structure.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.11
• /
• pp.1153-1160
• /
• 2013

SMISMO valve configuration is now starting to draw attention of the researchers of the construction equipment industry to increase the fuel efficiency of their equipment like excavators and wheel-loaders. An open-loop control strategy for grading operation of hydraulic excavator systems using SMISMO valve configuration is investigated in this paper. Tabor's algorithm for 1 d.o.f. SMISMO system under the assumption of quasi-static operation is revealed as not adequate for multi d.o.f. system with large moment of inertia even though the motion of the system is slow. New parameters are proposed in this paper. It modifies Tabor's open-loop control strategy for the grading operation of hydraulic excavators using SMISMO valve configuration. A simulation-based parameter tuning method is also proposed. It uses GA (Genetic Algorithm) to find the best parameter values. Simulation study for a practical hydraulic excavator shows the validity of the proposed open-loop control strategy.

• Convergence Security Journal
• /
• v.6 no.2
• /
• pp.31-42
• /
• 2006

In this paper, we proposed an integrated infrastructure for optimal information security to resolve these kinds of problems and to implement more powerful protection. The proposed infrastructure presents a security framework, provides a functional mechanism, and implements a scheme for information security based on the design concept of integrated structures. In order to ensure effective malicious traffic blocking, this paper emphasizes that a comprehensive approach through infrastructure improvement and combination of scanning tool is the only measure for preparing against today's environment of virus infiltration. The proposed model is a measure developed at a time when a permanent technological solution to virus is yet to be developed. A performance analysis model is developed and the performance is evaluated through the case studies for the proposed methodology. The effectiveness of the infrastructure for optimal information security needs the continuous diagnostic evaluation and tuning through the users or the organizations.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.33-35
• /
• 2005

In this paper, a two-mass system for SiOG (Silicon on Glass) vibratory gyroscope with the need of frequency tuning was proposed to increase the stability of the device with wide bandwidth. Air damping and bandwidth were analyzed using MATLAB. The measured resonance frequency is 5.2 kHz, which is 7 kHz in the design. But the measured bandwidth is 450 Hz, similar to the designed bandwidth with 500 Hz. Also the frequency difference (210 Hz) between the driving and sensing part is smaller than the wide bandwidth of two mass system.