• 한국음향학회지
• /
• 제38권6호
• /
• pp.697-702
• /
• 2019

방송 콘텐츠의 혼합 신호에서 배경음악 신호를 분리하는 확장된 합성곱을 이용한 멀티 밴드 멀티 스케일 DenseNet을 제안한다. 확장된 합성곱은 스펙트로그램의 다양한 스케일 문맥 정보를 학습하기 용이하도록 한다. 컴퓨터 모의실험 결과, 제안한 구조는 신호대잡음비(Signal to Noise Ratio, SNR) 0 dB, -10 dB의 환경에서 각각 0.15 dB, 0.27 dB의 신호대왜곡비(Signal to Distortion Ratio, SDR)를 개선하였다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제51권9호
• /
• pp.423-430
• /
• 2002

The fabrication and experimentation of multi-channel electrodes which enable detecting and recording of multi-site neuronal signals have been investigated. A multi-channel electrode array was fabricated by depositing 2000${\AA}$ thick Au layer on the 1000${\AA}$ thick Ti adhesion layer on a glass wafer. The metal paths were patterned by wet etching and passivated by depositing a PECVD silicon nitride insulation layer to prevent signals from intermixing or cross-talking. After placing a thin slice of rat cerebellar granule cell in the culture ring located in central portion of the multi-channel electrode plate, a neuronal signal from an electrode which is in contact with the cerebellar granule cell has been detected. It was found that the electrode impedance ranges 200㏀∼1㏁ and the impedance is not changed by cleaning with nitric acid. Also, the impedance is inversely proportion to the exposed electrode area and the cross-talk is negligible when the electrode spacing is bigger than 600$\mu\textrm{m}$. The amplitude and frequency of the measured action potential were 38㎷ and 2㎑, which are typical values. From the experimental results, the fabricated multi-channel electrode array proved to be suitable for multi-site neuronal signal detection for the analysis of a complicated cell network.

• 한국생산제조학회지
• /
• 제6권4호
• /
• pp.124-129
• /
• 1997

The experimental investigation is mainly focused to detect tool wear by cutting signal measurements in multi-insert face milling SS 41 and STS 304. This research have investigated the effects on the insert number, which has relationship with mean-cutting force. AE(acoustic emission) signal, tool life and surface roughness in machining SS41 and STS 304. The cutting force and AE signal are monitored to analyse the cutting process, The surface roughness of the specimens machined by TiN coated tool with the various insert numbers measured at various cutting speeds, feed rates and depths of cut, The width of flank wear is also observed.

• 센서학회지
• /
• 제3권1호
• /
• pp.54-60
• /
• 1994

본 논문에서는 멀티센서 신호처리용 집적회로를 구성하였다. 제안된 회로는 멀티센서 신호 선택을 위한 아날로그 멀티플렉서, 노이즈 제거와 신호증폭을 위한 능동 필터, 디지탈 신호처리부와의 인터페이스를 위한 샘플-홀드 회로 등으로 구성하였다. 이러한 기능회로들을 CMOS 트랜지스터로 설계하여 집적화를 가능케 하였으며, 이로 인해 멀티센서 신호처리 시스템의 저소비전력화, 소형화를 구현케하였다.

• 전기학회논문지
• /
• 제61권11호
• /
• pp.1671-1675
• /
• 2012

In this paper, we fabricate multi-channel receiver for radar system. This receiver at X-band can be received 8 signal of an identical characteristic, dynamic range has more than 80[dB]. To process direct received signals, this system has the built-in two digital de-modulators which offer the minimum loss on the receiving signal path and has high stability by adding Built-In Test. The gain, noise figure, difference of amplitude and phase on the signal path is respectively $14{\pm}2$[dB], 19[dB], ${\pm}2$[dB], $10^{\circ}$ and below.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.66-66
• /
• 2000

In this parer, we introduce an algorithm to control flows of the traffic in multi-intersections. It is pointed out that the main problem in traffic control is how to resolve the congested situations for the particular time-durations and directions. The heavy load to a certain direction usually leads the intersection to congested situations, and the adjacent intersections are affected. We control and analyze the traffic flow of multi-intersections consisting of five intersections, in which four intersections are linked to the four directions of the central one. The entrance of vehicles of each direction is described using the concept of probability. We compare the performance of the pretimed signal controls to the traffic adaptive signal controller using a Petri Net simulation tool, Exspect.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2552-2554
• /
• 2001

This paper presents a front-end electronic circuits for signal detection on multi-gap resistive plate. The input to the circuit is the signal(voltage : -800mv, frequency : 20${\sim}$40MHZ, noise : 50mv, 1GHz) from the multi-gap resistive plate chamber and the output is the 5v pulse signal. The front-end electronic circuit consists of preamplifier, peak-detector, and comparator. Spice simulation show that the circuit has the better response time than the one of the conventional measuring instruments.

• 대한전자공학회논문지TC
• /
• 제47권12호
• /
• pp.61-68
• /
• 2010

본 논문에서는 WCDMA LCR-TDD 시스템에서 멀티레벨 제어 신호 방식을 적용한 하향 링크 ARQ-TSTD (ARQ-aided Time Switched Transmit Diversity)의 성능을 계산한다. 제안된 ARQ-TSTD는 멀티레벨 제어 선호 방식을 적용하여 수신측이 에러체크를 수행한 후 송신측으로 기존의 응답신호 (ACK or NACK or 신호) 이외에 NACK2 선호를 정의하고 이를 피드백한다. 송신측은 NACK2 신호를 본 논문에서 제안한 전송지연과 다중사용자 스케줄링 방식을 적용하는데 활용한다. 시뮬레이션 결과는 3km/h의 이동국 속도에서 프레임 오류 확률 (Frame Error Rate)이 10%일 때 5개 서브프레임 전송지연 방식, 2명의 사용자 스케줄링 방식이 각각 약 1.3dB, 약1.4dB의 성능향상이 있었다. 그리고 Eb/N0=-3dB에서 각각 약 14% 11.5%의 수율 성능 이득이 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3120-3122
• /
• 1999

In this paper we have designed the signal processing system for driving the Poly-Si TFT LCD of EWS. The signal processing system consist of timing controller, ramp signal generator and video signal processing system. Timing controller includes the top-down inversion. left right inversion, left-right shifting and control signal generator according to multi-source signal. The video signal processing system generates sawtooth-shaped waveform by using PROM and DAC for multi-gray scales and implements gamma correction function for compensating the TFT-LCD nonlinear charcteristic of the TFT-LCD. Finally we have discussed the experiment results and its application according to the designed TFT-LCD driving system.

• Journal of Positioning, Navigation, and Timing
• /
• 제13권2호
• /
• pp.149-158
• /
• 2024

Global Navigation Satellite System (GNSS) receivers are becoming increasingly sophisticated, equipped with advanced features and precise specifications, thus demanding efficient and high-performance hardware platforms. This paper presents the design and implementation of a Field-Programmable Gate Array (FPGA)-based GNSS receiver development platform for multi-band signal processing. This platform utilizes a FPGA to provide a flexible and re-configurable hardware environment, enabling real-time signal processing, position determination, and handling of large-scale data. Integrated signal processing of L/S bands enhances the performance and functionality of GNSS receivers. Key components such as the RF frontend, signal processing modules, and power management are designed to ensure optimal signal reception and processing, supporting multiple GNSS. The developed hardware platform enables real-time signal processing and position determination, supporting multiple GNSS systems, thereby contributing to the advancement of GNSS development and research.