• 한국습지학회지
• /
• 제9권3호
• /
• pp.25-34
• /
• 2007

본 연구는 도심지 유역인 경기도 부천 여월동 단지 내의 도시하천에 대해서 유출 및 홍수 특성을 분석하였다. 해당 유역의 하천은 차집 관로에 의한 생활하수와 흐름의 차단으로 인하여 평상시에는 매우 적은 유량만이 흐르고 있으나, 홍수 시에는 상대적으로 높은 홍수위로 인해 홍수 피해의 위험성을 보이고 있다. 홍수에 대한 안전성을 확인하기 위하여 유출 해석 모형을 적용하고, 또한 해당 유역에 대해 구축된 GIS 자료 및 하천 단면과 HEC-RAS를 이용, 홍수위를 예측하여 이를 바탕으로 해당 하천의 치수 안정성을 검토하였다. 검토 결과 다목적 소하천을 목적으로 설치된 하천 구조물로 인하여 홍수 피해 발생 위험이 있었으며, 하천 안정성에 대한 불안요소를 포함하고 있었다. 이러한 단지내 소규모의 도시유역에 대한 홍수 유출 해석에서는 홍수 유출 외에도 구조물에 의한 배수위 변동과 유속 등과 같은 여러 위험 요인에 대하여 함께 고려해야 할 것으로 판단된다.

• 한국표면공학회지
• /
• 제48권6호
• /
• pp.360-370
• /
• 2015

As the size of the semiconductor devices shrinks to nanometer scale, the importance of plasma etching process to the fabrication of nanometer scale semiconductor devices is increasing further and further. But for the nanoscale devices, conventional plasma etching technique is extremely difficult to meet the requirement of the device fabrication, therefore, other etching techniques such as use of multi frequency plasma, source/bias/gas pulsing, etc. are investigated to meet the etching target. Until today, various pulsing techniques including pulsed plasma source and/or pulse-biased plasma etching have been tested on various materials. In this review, the experimental/theoretical studies of pulsed plasmas during the nanoscale plasma etching on etch profile, etch selectivity, uniformity, etc. have been summarized. Especially, the researches of pulsed plasma on the etching of silicon, $SiO_2$, and magnetic materials in the semiconductor industry for further device scaling have been discussed. Those results demonstrated the importance of pulse plasma on the pattern control for achieving the best performance. Although some of the pulsing mechanism is not well established, it is believed that this review will give a certain understanding on the pulsed plasma techniques.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권3호
• /
• pp.159-167
• /
• 2005

Quantization effects (QEs), which manifests when the device dimensions are comparable to the de Brogile wavelength, are becoming common physical phenomena in the present micro-/nanometer technology era. While most novel devices take advantage of QEs to achieve fast switching speed, miniature size and extremely small power consumption, the mainstream CMOS devices (with the exception of EEPROMs) are generally suffering in performance from these effects. In this paper, an analytical model accounting for the QEs and poly-depletion effects (PDEs) at the silicon (Si)/dielectric interface describing the capacitance-voltage (C-V) and current-voltage (I-V) characteristics of MOS devices with thin oxides is developed. It is also applicable to multi-layer gate-stack structures, since a general procedure is used for calculating the quantum inversion charge density. Using this inversion charge density, device characteristics are obtained. Also solutions for C-V can be quickly obtained without computational burden of solving over a physical grid. We conclude with comparison of the results obtained with our model and those obtained by self-consistent solution of the $Schr{\ddot{o}}dinger$ and Poisson equations and simulations reported previously in the literature. A good agreement was observed between them.

• 한국환경보건학회지
• /
• 제43권5호
• /
• pp.382-392
• /
• 2017

Objectives: The purpose of this study is to obtain basic data on the development of a risk communication model through an investigation of risk perception for radon and identify effective risk communication channels. Methods: A questionnaire was used to evaluate differences in perception level according to respective communication channels. A chi-squared test was used to analyze the difference in pre- and post-risk communication by communication channel. One-way ANOVA was used to analyze the difference in the radon risk perception rate for each communication channel. Results: All of the communication channels resulted in increased radon risk perception, but there was no statistical difference between them in terms of perception (p>0.05). However, based on previous findings that it is effective to use a multi-channel approach, it is considered that communication channels based on duplicate avenues is most appropriate. Conclusions: It is expected that this study will be used as basic data to better understand the formation of public opinion about radon risk and to understand the social reaction to each risk factor.

• 한국지능시스템학회논문지
• /
• 제27권2호
• /
• pp.138-143
• /
• 2017

본 연구에서는 ICT기반으로 한 스마트 터치 영상 출력 시스템의 구현을 목적으로 한다. 여기서의 영상 출력 시스템은 영상 감지 반응 센서를 통해 인식감지를 하여 움직임 패턴을 영상 화면과 실제 사용하는 해상도에 차이가 있으므로 이 오차를 최소화하기 위해서 화면 좌표인식 형태의 펜 터치 방식을 이용하는 스마트 영상 출력시스템을 말한다. 이를 위하여 ICT 기반의 기술을 응용하여 영상 데이터 출력을 기존의 유선 방식이 아닌 무선 방식과 스마트 터치 기능으로 PC 및 노트북, 모니터, 키보드, 마우스 없이도 원거리에서 조작이 가능한 스마트 영상 출력 시스템을 구축하였다. 본 연구결과는 스크린 없이도 벽면만 있으면 영상을 출력할 수 있고, 이 출력된 영상에서 펜으로 작동할 수 있다는 것이 특징이다.

• 사상체질의학회지
• /
• 제27권2호
• /
• pp.211-221
• /
• 2015

Objectives The aim of this study is to develop a Korea Sasang Constitutional Diagnostic Questionnaire (KS-15) with practicality and validity. Methods The data of body shape, temperament and symptoms were collected from 11 nationwide multi-centers in Korean Medical Clinics between Nov. 2009 to Aug. 2012. KS-15 algorithm was developed through Multinomial Logistic Regression and was applied for test group to verify it's classificatory function. Results The weight value of variables of KS-15 were different between male and female. The concordance of KS-15 with the expert in training group was 58.34% (72.8% in Tae-eumin, 54.8% in Soeumin, and 44.1% in Soyangin). The concordance of KS-15 with the expert in test group was 63.1% (63% in Tae-eumin, 83.3% in Soeumin, and 51.9% in Soyangin). Conclusions KS-15 seems to have suitable implement with practicality and validity. Further study is necessary to verify it accuracy and cut-off.

• 약학회지
• /
• 제57권2호
• /
• pp.132-138
• /
• 2013

Acinetobacter baumannii is gram-negative bacilli that can be widely found in environments. Recently, A. baumannii emerged as a serious nosocomial infection. A total of 92 A. baumannii were isolated from hospitalized patients in Seoul, Korea, between December 2010 and April 2011. Antimicrobial susceptibility testing was investigated using CLSI agar dilution methods. Tigecycline non-susceptible A. baumannii isolates were investigated by repetitive extragenic palindromic sequence-based PCR (rep-PCR). Pulsed-field gel electrophoresis was performed to determine the epidemiological relationships. All clinical isolates showed high-level resistance to the most commonly used antibiotics: Ciprofloxacin (87.0%), Ampicillin/sulbactam (82.6%), Cefotaxime (81.5%), Ceftazidime (80.4%). Moreover, 50.0% of these isolates were non-susceptible to tigecycline. When evaluated by RAPD analysis, generated distinct band ranging in size from 1kb to 8k band varying from 4 to 10 bands. Stricter surveillance and more rapid detection are essential to prevent the spread of multi drug resistant A. baumannii.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2005년도 추계학술대회 논문집
• /
• pp.167-170
• /
• 2005

This study aims to develop a detachable 'Infill Components' applicable to open housing. Recently, the need for innovative housing methods is increasing because of the environmental preservation issues and the need for favorable housing stock resulting from the increased housing supply ratio. In order to maintain favorable housing stock, there has to has a to be a shift from typical plans and construction methods for mass production to those with some identity, which may satisfy various needs of dwellers. In this light, the Ramen structure has become popular owing to the growth of remodelling market, and construction companies tend to adopt flexible type multi-family housings to increase sales by appealing to their customers. However, there are few domestic studies on the Infill components for the change of structure. As a result, further studies may have to be based on the case study. The purpose of this research is to provide fundamentals for the development of infill components corresponding to the structural change, especially for the development of partition walls that can be easily moved by dwellers. By reviewing problem of construction, arrangement of the movable partition wall system and door system which has within wring in the first Experimental Open Housing in Korea at KICT(KOHP21), this research provides the fundamentals for developing a movable partition wall acceptable to the dwellers who may want to remodel the interior to meet the needs of themselves.

• Journal of Computing Science and Engineering
• /
• 제1권2호
• /
• pp.177-194
• /
• 2007

Index selection is one of the most important decisions to take in the physical design of relational data warehouses. Indices reduce significantly the cost of processing complex OLAP queries, but require storage cost and induce maintenance overhead. Two main types of indices are available: mono-attribute indices (e.g., B-tree, bitmap, hash, etc.) and multi-attribute indices (join indices, bitmap join indices). To optimize star join queries characterized by joins between a large fact table and multiple dimension tables and selections on dimension tables, bitmap join indices are well adapted. They require less storage cost due to their binary representation. However, selecting these indices is a difficult task due to the exponential number of candidate attributes to be indexed. Most of approaches for index selection follow two main steps: (1) pruning the search space (i.e., reducing the number of candidate attributes) and (2) selecting indices using the pruned search space. In this paper, we first propose a data mining driven approach to prune the search space of bitmap join index selection problem. As opposed to an existing our technique that only uses frequency of attributes in queries as a pruning metric, our technique uses not only frequencies, but also other parameters such as the size of dimension tables involved in the indexing process, size of each dimension tuple, and page size on disk. We then define a greedy algorithm to select bitmap join indices that minimize processing cost and verify storage constraint. Finally, in order to evaluate the efficiency of our approach, we compare it with some existing techniques.

• Steel and Composite Structures
• /
• 제35권2호
• /
• pp.187-197
• /
• 2020

Ground motion records are commonly used for fragility curves (FCs) developing utilized in seismic loss estimating analysis for earthquake prone zones. These records could be 'real', say the recorded acceleration time series or 'simulated' records consistent with the regional seismicity and produced by use of alternative simulation methods. This study has focused on fragility curves developing for masonry buildings through computational 'simulated' ground motion records while evaluating the properness of these fragilities compared to the curves generated by the use of 'real' records. Assessing the dynamic responses of structures, nonlinear computational time history analyses through the equivalent single degree of freedom systems have been implemented on OpenSees platform. Accordingly, computational structural analyses of multi-story 3D frame structures with different stiffening members considering soil interaction have been carried out with finite element software according to (1992) Earthquake East-West component. The obtained results have been compared to each frame regarding soil interaction. Conclusion and recommendations with the discuss of obtaining findings are presented.