• The Journal of the Korea Contents Association
• /
• v.14 no.11
• /
• pp.519-532
• /
• 2014

The emerging technologies for the natural computer interaction can give manufacturers new opportunities of product innovation. This paper is the study on a method of human communication about a finger gestures interaction. As technological advance has been so rapid over the last few decades, the utilizing products or services will be soon popular. The purpose of this experiment are as follows; What is the usefulness of gesture interaction? What is the cognitive impact on gesture interaction users. The finger gestures interaction consist of poking, picking and grasping. By measuring each usability in 2D and 3D space, this study shows the effect of finger gestures interaction. The 2D and 3D experimental tool is developed by using LeapMotion technology. As a results, the experiments involved 48 subjects shows that there is no difference in usability between the gestures in 2D space but in 3D space, the meaningful difference has been found. In addition, all gestures express good usability in 2D space rather than 3D space. Especially, there are the attractive interest that using uni-finger is better than multi-fingers.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.7
• /
• pp.929-935
• /
• 2014

This paper is study on the pressure monitoring system(PMS) for ship's engine performance analysis( SEPA) based on web, with high speed and accuracy. This system is composed of pressure sensor, monitoring module with multi channel A/D converter, TCP/IP and satellite internet communication system. Existing domestic products measure cylinder pressure when piston of first explosive cylinder reached TDC(the top dead center) point and then measure next cylinder pressure manually each angle divided by a constant rotating interval. But presented system monitors in the local and web computer, using pressure information transmitted from pressure sensor installed on each engine. In this system, it is possible to increase the accuracy of the engine performance analysis because not only each TDC points but cylinder pressures synchronized with the TDC points could be measured in real time, accurately. And therefore, it may be used in a various diagnosis of main engines, such as deviations of each cylinder maximum pressures(Pmax) and the TDC firing positions and combustion conditions.

• Textile Coloration and Finishing
• /
• v.28 no.1
• /
• pp.48-56
• /
• 2016

Improvement of heat sink technology related to the continuous implementation performance and extension of device-life in circumstance of easy heating and more compact space has been becoming more important issue as multi-functional integration and miniaturization trend of electronic gadgets and products has been generalized. In this study, it purposed to minimize of decline of the heat diffusivity by gluing polymer through compounding of inorganic particles which have thermal conductive properties. We used NH-9300 as base resin and used inorganic fillers such as silicon carbide(SiC), aluminum nitride(AlN), and boron nitride(BN) to improve heat diffusivity. After making film which was made from 100 part of acrylic resin mixed hardener(1.0 part more or less) with inorganic particles. The film was matured at $80^{\circ}C$ for 24h. Diffusivity were tested according to sorts of particles and density of particles as well as size and structure of particle to improve the effect of heat sink in view of morphology assessing diffusivity by LFA(Netzsch/LFA 447 Nano Flash) and adhesion strength by UTM(Universal Testing Machine). The correlation between diffusivity of pure inorganic particles and composite as well as the relation between density and morphology of inorganic particles has been studied. The study related morphology showed that globular type had superior diffusivity at low density of 25% but on the contarary globular type was inferior to non-globular type at high density of 80%.

• Journal of Korea Technology Innovation Society
• /
• v.16 no.1
• /
• pp.1-19
• /
• 2013

A myriad of information production channels and medium including internet, social media, and multi media channels emerged, often with conflicting interests, disseminate unwanted and inaccurate information which could result in sudden severe public relations damage to the global companies with world class products if not dealt with in the professional way. Properly crafted and managed public relations thus should become the integral part of all organizations. In particular online public relations leadership becomes even more important to public organizations responsible for national branding and interests and to private sectors expanding into the global markets. The research aims to increase global competitiveness of the pubic and exporters by presenting the online leadership strategy 101. For this purpose, locally produced web sites are analysed both from technical and global marketing perspectives. From the research all web sites were classified into three types of ghost, wreck, and moron. The 2012 research showed that 99% was moron, followed by 67% wreck and 1% ghost. The research presents must strategies for global public relations and marketing. They include strategic planning, public relation training, white hat search engine optimization, web standards, web accessibility, mobile web site and the inbound marketing strategies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.22-27
• /
• 2020

In this paper, we study the methodology to improve productivity and transportation efficiency simultaneously in the manufacturing environment of injection plants which has multiple injection machines arranged in parallel. In general, the post-processes such as finishing are continuously arranged in the injection machine located in the lower level of the injection plants, and one or two workers in charge of post-processing are always arranged. Therefore injection plants have low productivity due to post-processing and the front of the injection machine is very crowded due to various logistics flows. In this paper, we propose the designing methodology of conveyor structure for integrating the post-processes arranged at each injection machine and transporting the injection products to the integrated post-process automatically. Specifically, we propose the models for computing the number of conveyor units into the integrated processes, and for finding the optimal combinations to connect each machines and the conveyors. The proposed model is for the total productivity improvement, which are productivity and transportation efficiency. By applying the proposed model to companies that produce injection parts used for the home appliances, we verify the applicability and the effect of improving productivity and transportation efficiency, which more than 40%.

• Journal of Advanced Navigation Technology
• /
• v.6 no.1
• /
• pp.37-43
• /
• 2002

This paper describes the performance evaluation and analysis of Wireless Local Area Network (W-LAN) in the 5 GHz ISM-band in compliance with IEEE 802.11a. At present, most W-LAN products are based on 2.4 GHz band, but low speed (11Mbps) has the limitation to serve systems demanding high-speed data transmission. To solve this problem, it is necessary to design next generation W-LAN system with 54Mbps in the 5GHz. It is sure that implementation of next generation W-LAN will bring competitive advantages. In particular, it will support telecommunications for high-speed mobile environments as well as for fixed places such as a school zone, a lecture room, a hospital and other premises. A few simulation methods are applied to more accurate and reliable performance analysis of next generation W-LAN. To verify if continuous data service is supported for a high-speed mobile notebook, multi-path fading channels between wireless Access Point (AP) and wireless Network Interface Card (NIC) are modeled. In addition, low interference is analyzed via convolutional codes and Orthogonal Frequency-Division Multiplexing (OFDM). Also, to obtain reliable Bit Error Rate (BER), a single tap Least Mean Square (LMS) equalizer is applied. Given the above simulation, next generation W-LAN is an ideal solution for continuous data transmission in high-speed mobile environments.

• Journal of the Korean association of regional geographers
• /
• v.6 no.1
• /
• pp.29-49
• /
• 2000

The purposes of this study are to identify the characteristics of inner-city industrial community and to analyse the subsistence mode of small manufacturing enterprises in the industrial community in Taegu Metropolitan area. The case study area, Nowon 1. 2-ga dong, is the typical inner city industrial community, adjacent to old industrial complex, which was recently transformed from semi -industrial to semi-residential zoning district. Now there are many old one story housing, newly constructed multi stories housing and many small factories of metal and machinery products. The conflicts of between residents and small business owners are not serious but latent. The subsistence mode of small manufacturing enterprises in this area is characterized as the network production system. The main attributes of this mode are local integration, horizontal subcontracting and strong industrial linkages in production processes and transactions. These transactions are mainly made by face-to-face contacts. The small business owners' local social networks are seen as series of units which are interconnected through various types of social and business relations. They exchange business information as using social networks. In addition, the majority of them join local social clubs with their local business counterpartners. Finally, the locational advantages of inner-city industrial community are production network, different industrial linkages and characteristic industrial milieu such as social solidarity, informal labor market and incubator effects. But these advantages are being challenged from the contradiction between capital and laned property and the urban gentrification policy. Accordingly, there should be positive redevelopment policy considering the subsistence mode of small business in these areas.

• Journal of Navigation and Port Research
• /
• v.44 no.1
• /
• pp.10-19
• /
• 2020

Port Gyeongin was developed as a multi-functional port equipped with container and general port facilities and could be linked with nearby tourist attractions. However, it has experienced difficulties from the limitation of being a small port, duplicating functions, and lacking an interlink with nearby ports. Nonetheless, resident companies that need logistics facilities in Port Gyeongin or nearby ports process specific import and export goods such as wood, steel, and industrial products through Port Gyeongin because of the characteristics of the port. From this perspective, it is critical to establish a measure to promote Port Gyeongin through utility analysis of the stakeholders in Port Gyeongin. In this regard, the purpose of this study was to analyze the preference of stakeholders in Port Gyeongin using conjoint analysis and propose a difference in the preference of the stakeholders. Study results show that the terminal group, shippers, and tenant companies considered the berthing capacity, incentive scale, and port logistics cost as the most critical matters, respectively. The stakeholders in Port Gyeongin should recognize the difference in critical matters, and be equipped with shipper discovery and institutional arrangement according to the characteristics of Port Gyeongin such as cooperation with related institutions and inter-collaboration between operating companies to promote Port Gyeongin.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.1
• /
• pp.45-55
• /
• 2016

Light shows various optical behaviors such as reflection, absorption, and scattering on skin for individuals. In particular, reflection of light from the skin has been widely used as the brightness index of the skin of individuals through the measurement of the physical quantity of spectral reflectance. Therefore, the study of light behavior on skin would be useful for the preparation of new evaluation method in the development stage of make-up products. In this study, multi-dimensional analysis for spectral reflectance behavior of light on individual skin was performed using Kubelka-Munk model. Also, we analyzed the contribution of skin parameters such as skin thickness and hemoglobin, which could affect the spectral reflectance, using above model and literature information. Base on this, we calculated the theoretical reflectance of normal women for visual light, which showed good agreement with the measured reflectance. Our study of light propagation in skin based on Kubelka-Munk model provides useful insight for the development of personalized cosmetic in the near future.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.04a
• /
• pp.141-141
• /
• 2003

신선농산물의 호홉속도를 측정하는 방법 중 하나인 개방계(open system) 호흡속도 측정시스템은 소정의 농도로 조정된 혼합기체를 측정대상시료에 흘려 보내며 측정하는 방법이다. 개방계 측정법의 장점은 혼합 기체조성 영역에서 정확한 호흡속도를 얻을 수 있으며 방치시간이 필요 없으므로 반복 측정이 용이한 것 등이다. 그러나 개방계 측정법은 공급되는 혼합기체의 농도와 유속이 일정하여야 하며 연속으로 호흡속도 측정용 챔버의 혼합기체 공급측과 배기측에서 기체시료를 수집하여 매우 미세한 기체농도의 차이를 측정할 수 있어야 하고 기체 시료 수집에 상당한 주의가 요구된다. 이러한 문제를 개선하기 위하여 개방계 호흡속도 측정 시스템을 자동화하였다. 자동화된 호흡속도 측정 시스템은 혼합기체 발생장치, 온도조절이 가능한 기체기밀용 챔버와 G.C로 구성되어 있다. 환경기체조성을 위한 혼합기체발생장치는 $N_2$, $O_2$, $CO_2$ 압축 실린더에서 공급되는 기체를 압력 조절기를 통해서 일차압력을 조정하고 정밀 압력 조절기를 이용하여 0.1~0.2 kg/$\textrm{cm}^2$의 정압을 유지시켰다. 압력이 일정해진 기체는 metering valve를 이용하여 각 기체의 유량을 소정의 비율로 제어할 수 있도록 하였으며 각각의 기체는 gas mixed cell에서 실험 농도의 환경기체조성으로 혼합되어 항온기내의 호흡속도 측정 챔버($25^{\circ}C$)로 공급될 수 있도록 하였다. 호흡속도 측정용 챔버는 개스킷이 장착된 아크릴 재질이며 온도 조절이 가능한 항온기로 구성되어 있다. 호흡속도 측정용 챔버와 G.C간의 기체흐름은 three way solenoid valve에 의하여 제어되며 전원의 on/off에 따라 공급측의 가스와 배기측의 가스가 선택적으로 G.C에 공급될 수 있도록 구성하였다. 측정 대상 챔버의 기체는 제어된 유로를 따라 multi-position valve를 통과하여 G.C에서 분석되도록 하였다. 본 연구에서 개발된 개방계 호흡속도 자동 측정 시스템의 성능 실험에서 혼합기체발생장치에서 조제된 혼합 기체의 농도를 설정치와 비교한 결과 $O_2$와 $CO_2$의 농도에서 평균오차 0.2%로 정밀한 것으로 나타났으며 호흡속도 측정용 챔버의 혼합기체 공급측과 배기측의 가스 농도를 3회 반복 측정한 결과 재현성에서는 0.1%이하의 편차로 나타났다. 개방계 호흡속도 자동 측정 시스템을 이용하여 환경기체조성하에서 토마토의 호흡속도를 측정하는 실측 실험을 수행한 결과 2$0^{\circ}C$에서 12.7~42.1mg$CO_2$/kg.hr였으며 12$^{\circ}C$에서 2.5~8.2mg$CO_2$/kg.hr로 일반적으로 보고되고 있는 토마토 호흡속도와 일치하는 결과를 나타내었다.