• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1614-1620
• /
• 2009

The overlay multicast that has been recently presented as an alternative for the IP multicast has been getting much persuasion by the system resource and the network bandwidth and the advancement of the network cost. we propose a overlay multi_casting network policy for efficient multimedia services with P2P join scheduling. In order to evaluate the performance of proposed scheme, We test the performance of multi_casting nodes with average join count, the maximum guaranteed waiting time and buffer starvation ratio with similar techniques. The result of simulation shows improved about 15${\sim}$20% of performance.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.55 no.6
• /
• pp.227-235
• /
• 2006

In this paper, autonomous separation methodology of faulted section based on network is proposed newly, which can minimize the outage effect as compared with the existing center-based faulted section separation method by determining and separating autonomously the faulted section by the free operation information exchange among IEDs on the feeder of distribution system. The all IEDs is designed in network in which client/server function is possible in order to separate autonomously the faulted section using PtP(Peer to Peer) communication. Also, Inference based solution of IED for the autonomous faulted section separation is designed by rules obtained from the analyzing results of distribution system topology. Here, the switch IEDs transmit on network the fault information utilizing on multi-casting communication method, at the fame time, determine selfly whether they operates or not by inferencing autonomously the faulted section using the inference-based solution after receiving the transmitted information. Finally, in order to verify the effectiveness and application possibility of the proposed methodology, the diversity fault cases are simulated for the typical distribution system.

• Journal of the Korean Society for Precision Engineering
• /
• v.34 no.1
• /
• pp.59-63
• /
• 2017

We present a multi-sample array device based on a pneumatic system. Solenoid valves were used to control a micro valve in a pneumatic system. The use of a compressor together with a vacuum pump ensured that one outlet could supply both compression and vacuum pressure. The multi-sample array device was fabricated using conventional photolithography and PDMS casting. The device was composed of a multiplexer, sample array, and rinsing. The multiplexer could control four sample solutions injecting into the sample array chamber. Sample solution not arrayed was removed by DI-water from the rinsing inlet. To prevent trapping of microbubbles in the channel during injection of sample solution into the device, surfactant was added in PDMS solution to serve as a hydrophilic surface treatment. As a result, the device could be used as a sample array for 64 cases, using four samples and three columns of three chambers.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10a
• /
• pp.299-301
• /
• 1998

화상회의 프로그램에서 회의 참여자간에 멀티 캐스팅을 이용하여 정보를 전송할 경우 point-to-point 방법보다 네트윅 트래픽을 상당히 줄일 수 있다는 장점이 있으나. 각 회긔 참여자간 모두 같은 QoS를 지원할 수밖에 없다는 단점이 발생한다. 본 논문에서는 전송할 자료를 몇 가지 그룹으로 나누어 그룹 전송함으로 다양한 QoS를 원하는 방법을 제시하고자한다.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1528-1531
• /
• 1987

Two graphics simulators, SOFTGRA and RACA, have been developed. The SOFTGRA has been implemented by the scan line algorithm using 2 shading models with multi-light sources. The RACA is a ray casting simulator which produces shadowed images with realism. Above two simulators run on Sun micro system and MV10000 and produce image data which are transfered into IBM AT with Metheus' Omega graphics board and drawn there.

• Fibers and Polymers
• /
• v.7 no.4
• /
• pp.323-327
• /
• 2006

Poly(vinyl alcohol) (PVA)/multi-walled carbon nanotube (MWNT) composite films were prepared by casting a DMSO solution of PVA and MWNTs, whereby the MWNTs were dispersed by sonication. A significant improvement in the mechanical properties of the PVA drawn films was achieved by the addition of a small amount of MWNTs. The initial modulus and the tensile strength of the PVA drawn film increased by 30 % and 45 %, respectively, with the addition of 1 wt% MWNTs, which are close to those calculated from the rule of mixtures, and were strongly dependent upon the orientation of the PVA matrix. The mechanical properties, however, were not improved with a further increase in the MWNT content. The orientation of MWNTs in the composite was not well developed compared to that of the PVA matrix. This result suggests that the improvement of the molecular orientation of the PVA matrix plays a major role in the increase of the mechanical propeties of the drawn PVA/MWNT composite films.

• Food Science and Biotechnology
• /
• v.14 no.4
• /
• pp.554-557
• /
• 2005

As a device for taste sensation, an 8-channel taste evaluation system was prepared and applied for discriminant analysis of marketed liquor. The biomimetic polymer membranes for the system were prepared through a casting procedure by employing polyvinyl chloride, bis (2-ethylhexyl)sebacate as plasticizer and electroactive materials such as valinomycin in the ratio of 33:66:1, and were separately attached over the sensitive area of ion-selective electrodes to construct the corresponding taste sensor array. The sensor array in conjunction with a double junction reference electrode was connected to a high-input impedance amplifier and the amplified sensor signals were interfaced to a personal computer via an A/D converter. When the signal data from the sensor array for 3 groups of marketed liquor like Maesilju, Soju and beer were analyzed by principal component analysis after normalization, it was observed that the 1st, 2nd and 3rd principal component were responsible for most of the total data variance, and the analyzed liquor samples were discriminated well in 2 dimensional principal component planes composed of the 1st-2nd and the 1st-3rd principal component.

• International Journal of Automotive Technology
• /
• v.3 no.2
• /
• pp.47-52
• /
• 2002

The integration of CAD/CAM/CAE in product development is the key to realize concurrent engineering. Generally, different systems are employed in product development departments. These different systems create a lot of trout)toes such as difficulty in communication, misunderstanding and so on. A new approach to integrate CAD/CAM/CAE in one system based on CATIA thor the end-to-end process in cylinder head development is presented. Hulti Model Technology (MMT) is used to create consistent and associated CAD models for the end-to-end process in cylinder head development. The concept and method to create and organize multi models are discussed. A typical four-layer structure of HHT for mechanical products is defined. The multi level structure of the cylinder head models based on MMT is provided. The CAD models of cylinder head created based on MMT can be used as the consistent model. All models in the downstream of cylinder head development such as structure analysis, CFD, sand core design , casting simulation and so oil are associated with the CAD models. Practice shows the approach in this paper enables the development process to be carried concurrently and can obviously shorten time to the market, reduce product cost and improve product quality.

• Journal of the Korea Computer Industry Society
• /
• v.9 no.2
• /
• pp.53-62
• /
• 2008

Intensive studies have been made in the area of IPTV VOD server. The basic goal of the study is to find an efficient mechanism to allow maximum number of users under the limited resources such as Buffer utilization, disk performance and network bandwidth. The overlay multicast that has been recently presented as an alternative for the IP multicast has been getting much persuasion by the system resource and the network bandwidth and the advancement of the network cost. we propose a efficient overlay multi_casting network policy for multimedia services with multi media partition storage. Simulation results show that the rate of service number and service time of proposed scheme are about 23% performance improved than that of traditional methods. This implies that our method can allow much more users for given resources.

• Carbon letters
• /
• v.13 no.2
• /
• pp.126-129
• /
• 2012

Nanocomposite films were made by a simple solution casting method in which multi-walled carbon nanotubes (MWCNT) and magnetite nanoparticles ($Fe_3O_4$) were used as dopant materials to enhance the electrical conductivity of chitosan nanocomposite films. The films contained fixed CNT concentrations (5, 8, and 10 wt%) and varying $Fe_3O_4$ content. It was determined that a 1:1 ratio of CNT to $Fe_3O_4$ provided optimal conductivity according to dopant material loading. X-ray diffraction patterns for the nanocomposite films, were determined to investigate their chemical and phase composition, revealed that nanoparticle agglomeration occurred at high $Fe_3O_4$ loadings, which hindered the synergistic effect of the doping materials on the conductivity of the films.