• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.1002-1006
• /
• 2006

Temperature monitoring techniques per depth have been recognized as important information in the reservoir environmental issues. However, old measurement method by single temperature sensor and cable type has demerits not only for its limited measuring location but for its inconvenience of users. In this study, multi-channel temperature monitoring system was introduced and executed experiment for actual application feasibility evaluation. Both type of new techniques such as multi-channel addressable built-in temperature sensor and fiber optic multi sensor were tested in Daechung and Imha reservoir. As a result, it was proved that these kinds of temperature monitoring skills had very good performance and availability for a output of spatial, simultaneous thermal distribution focused on the user's convenience. And these measuring method and thermal data will be useful for providing basic information in a water resources investigation like reservoir stratification and environmental problems.

• 조명전기설비학회논문지
• /
• 제18권4호
• /
• pp.73-82
• /
• 2004

본 논문에서는 전력계통에 미치는 영향이 매우 큰 초고압 송전선 다상 뇌격섬락 사고에 대하여 과도현상 분석 프로그램인 ATP를 이용하여 검토하였다. 특히 다상섬락현상 모의에 가장 중요한 아킹혼을 비선형 인덕턴스와 저항으로 표현하여 이 모델의 타당성을 검토하였고 765[k베 2회선 송전계통의 뇌격 파라메터와 섬락상과 관계를 연구하였다.

• 제어로봇시스템학회논문지
• /
• 제9권12호
• /
• pp.1048-1054
• /
• 2003

In laser surface hardening processes, the geometrical parameters such as the depth and the width of a hardened layer can be utilized to assess the hardened layer quality. However, accurate monitoring of the geometrical parameters for on-line process control as well as for on-line quality evaluation is very difficult because the hardened layer is formed beneath a material surface and is not visible. Therefore, temperature monitoring of a point of specimen surface has most frequently been used as a process monitoring method. But, a hardened layer depends on the temperature distribution and the thermal history of a specimen during laser surface hardening processing. So, this paper describes the estimation results of the geometric parameters using multi-point surface temperature monitoring. A series of hardening experiments were performed to find the relationships between the geometric parameters and the measured temperature. Estimation results using a neural network show the enhanced effectiveness of multi-point surface temperature monitoring compared to one-point monitoring.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2017년도 제55차 동계학술대회논문집 25권1호
• /
• pp.79-82
• /
• 2017

IoT devices are interconnected in global network with different functionalities and manage the data transfer in cloud computing. IoT devices can be used anytime, anywhere with any device with different applications and protocols. Same devices but different applications according to end user requirements such as sensors and Wi-Fi devices, reusability of these applications can enhance the development process. However, large number of variations in cloud computing make it difficult the features selection in application because of compatibility issues of devices. In this paper we have proposed multi-Software Product Lines (multi-SPLs) approach to manage the variabilities and commonalities of IoT applications and protocols. Feature modeling is used to manage the commonalities and variabilities of SPL. We proposed that multi-SPLs feature model is more appropriate for modeling of IoT applications and protocols.

• 디지털산업정보학회논문지
• /
• 제7권4호
• /
• pp.23-30
• /
• 2011

Recently, Tsai proposed a remote user authentication scheme suited for multi-server environments, in which users can be authenticated using a single password shared with the registration center. Our analysis shows that Tsai et al's scheme does not achieve its fundamental goal of password security. We demonstrate this by mounting an undetectable on-line password guessing attack on Tsai et al.'s scheme.

• 전기전자학회논문지
• /
• 제20권2호
• /
• pp.167-170
• /
• 2016

정적 램의 비트라인을 정밀하게 추적하는 감지증폭기의 enable 신호를 만들기 위해 replica bit-line 기술 (RBL)이 사용된다. 하지만, 공정으로 인한 문턱전압의 변화는 replica bit-line 회로에 흐르는 전류를 변화시키고 이는 감지증폭기의 enable 신호 생성 시간 ($T_{SAE}$)을 변화시키며, 결과적으로는 읽기 동작을 불안정하게 한다. 본 논문에서는 conventional replica bit-line delay ($RBL_{conv}$)구조 및 $T_{SAE}$ 변화를 감소시킬 수 있는 개선 구조인 dual replica bit-line delay (DRBD)구조와 multi-stage dual replica bit-line delay(MDRBD)구조를 소개하고, 14nm FinFET 공정, 동작전압 0.6V에서 각 기술들에 대한 읽기 성공률이 $6{\sigma}$를 만족하는 최대 on-cell 개수를 simulation을 통해 찾고 이때 각 구조에 대한 performance와 에너지를 비교했다. 그 결과, $RBL_{conv}$ 대비 DRBD와 MDRBD의 performance는 각각 24.4%와 48.3% 저하되고 에너지 소모는 각각 8%와 32.4% 감소된 것을 관찰하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.1145-1148
• /
• 1998

New capacitance modeling and transient analysis for multi-layer interconnects with shielding effect are presented. The upper layer capacitances with under-layer shielding lines are represented by introducing a filling factor η which can be defined as the ratio of upper-layer line length to the total under-layer line width. The upper-layer effective self capacitances considering two extreme cases which the underlayer metals are assumed as a ground or as a Vdd are modeled. The signal transient analysis with shielding effect model is performed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1079-1081
• /
• 1999

This paper presents the standard for dividing/tieing the distribution lines and installing optimally the automated distribution switch-gear in multi-line faults. Also this paper recommends the distribution system design in consideration of the live load transfer of the concentrated load in the last load-side. This recommendation will be useful for designing the distribution network, developing the feeder automation software and operating the distribution automation system.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 추계학술대회 논문집
• /
• pp.54-59
• /
• 1998

In order to minimize straightness error of deflected shafts, a automatically bending process control system is designed, fabricated, and studied. The multi-step straightening process and the three-point bending process are developed for the geometric adaptive straightness control. Load-deflection relationship, on-line identification of variations of material properties, on-line springback prediction, and studied for the three-point bending processes. Selection of a loading point supporting condition are derved form fuzzy inference and fuzzy self-learning method in the multi-step straighternign process. Automatic straightening machine is fabricated by using the develped ideas. Validity of the proposed system si verified through experiments.

• 한국자동차공학회논문집
• /
• 제4권1호
• /
• pp.177-186
• /
• 1996

A convolution alogorithm combined with Fourier transformation is applied to the tomographic reconstruction of the asymmetric spray structure to identify the local drop size and volume concentration. The line of sight intergrated data from Malvern particle analyzer with multiangular scanning form a basic information for the deconvolution. Linear interpolation is tested to obtain the effect of increasing number of scanning angles. This transformation method predicts well the structure of asymmetric spray. The tehnique can be extended to other line of sight combustion diagnostics.