• Journal of the Semiconductor & Display Technology
• /
• v.10 no.4
• /
• pp.7-13
• /
• 2011

In this paper, the IC(Integrated Circuit) for multi-channel synchronous communication was designed by using FPGA and VHDL language. The existing chips for synchronous communication that has been used commercially are composed for one to two channels. Therefore, when communication system with three channels or more is made, the cost becomes high and it becomes complicated for communication system to be realized and also has very little buffer, load that is placed into Microprocessor increases heavily in case of high speed communication or transmission of high-capacity data. The designed IC was improved the function and performance of communication system and reduced costs by designing 8 synchronous communication channels with only one IC, and it has the size of transmitter/receiver buffer with 1024 bytes respectively and consequently high speed communication became possible. It was designed with a communication signal of a form various encoding. To detect errors of communications, the CRC-ITU-T logic and channel MUX logic was designed with hardware logics so that the malfunction can be prevented and errors can be detected more easily and input/output port regarding each communication channel can be used flexibly and consequently the reliability of system was improved. In order to show the performance of designed IC, the test was conducted successfully in Quartus simulation and experiment and the excellence was compared with the 85C3016VSC of ZILOG company that are used widely as chips for synchronous communication.

• Korean Journal of Optics and Photonics
• /
• v.16 no.4
• /
• pp.334-339
• /
• 2005

We studied the spatial filtering characteristics of a multi-phase hologram optical low-pass filter(HOLF). Using the Monte-Carlo based hologram generation program, we designed holograms whose diffraction patterns are circular shaped 21 beams and calculated the diffraction efficiencies and MTFs. 4-phase HOLF have the same diffraction efficiency as that of 2-phase HOLF. The MTF graphs of the two are also nearly alike. But 8-phase HOLF shows higher efficiency than those previously discussed and has larger MTF values in the low frequency region. 16-phase HOLF has just a little better characteristics than 8-phase. Considering the errors which can arise in the process of making holograms, 8-phase HOLF fits the goal of improving the resolution of spatial filter. We also fabricated 8-phase HOLF and .measured MTF The experimental results agree well with the theoretical expectations.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.167-173
• /
• 2015

Extraction of Finger-end points is one of the most process for user multi-commands in the Hand-Gesture interface technology. However, most of previous works use the geometric and morphological method for extracting a finger-end points. Therefore, this paper proposes the method of user finger-end points extraction that is motivated a ultrared diffused illumination, which is used for the user commands in the multi-touch display device. Proposed air-mouse is worked by the quantity state and moving direction of extracted finger-end points. Also, our system includes a basic mouse event, as well as the continuous command function for expending a user multi-gesture. In order to evaluate the performance of the our proposed method, after applying to the web browser application as a command device. As a result, the proposed method showed the average 90% success-rate for the various user-commands.

• Journal of IKEEE
• /
• v.8 no.1 s.14
• /
• pp.39-46
• /
• 2004

This paper presents the realization schemes for a multipurpose coherent mono-pulse radar Simulator with extendable features. We developed and installed the TSG(Timing Signal Generator) board which can simulate a mechanically rotate signal of antenna, an operation timing signal of pulse radar and target signal, to operate the simulator without real target in the indoor environment. Also, with the insertion of the radar signal processor, it came to be easy to achieve the addition of radar function algorithms, to rebuild or extend the multi-DSP Architecture into the simulator. Throughout the simulation results, we verified that the designed coherent mono-pulse radar simulator can exactly display a moving target on the realistic monitor(RD 9800).

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.5
• /
• pp.29-35
• /
• 2002

This study shows the process design and forming analysis of permalloy shielding can that support the automobile multi-display parts to indicate the accurate information of car. This study is particularly important, since the accuracy of permalloy shielding can is known to affect the magnetic properties such as coercivity and permeability quite sensitively. The objective functions are defects such as hemming wind, hemming length, hemming wrap and tightness in prehemming process. The pre-hemming angle is considered as design parameter. The commercial finite element program PAM-STAMP™ was used to simulate the pre-hemming and hemming process. The ANN (Artificial Neural Network) has been implemented for minimizing of objective function and for investigating effect of punch angle relevant to the pre-hemming process. The results of analysis to validate the proposed design method are presented.

• Proceedings of the KIPE Conference
• /
• 2007.11a
• /
• pp.53-55
• /
• 2007

This paper describes an implementation of a wide-range dimming controller of a LED backlight for Avionics applications such as the control data unit(CDU) and multi-function display(MFD). A feedback controller using a light sensor is proposed to control the brightness in the low dimming range. The proposed controller provides an improved control performance in the wide dimming range of 1:3000 even under the temperature variations. The experimental results are provided to show the effectiveness of the proposed control system.

• Proceedings of the KIEE Conference
• /
• 2007.11c
• /
• pp.146-148
• /
• 2007

In this paper, we designed the bay control unit that is based on the microprocessors and integrates with the new technology of electrical, electronic, and mechanical fields. Nowadays the customers have required much more integrates multi protection relay, monitoring, control devices and power management for better and easier maintenance, performance, electrical system analysis and communication according to new trend of switchboard. This bay controller supplies those requirements of customers with easy handling and operation. This bay controller provides a graphic display with rear-lit liquid crystal LCD and push buttons as kinds of HMI. This bay controller provides the parameter setting program, various editors and fault recording and analysis program on Windows/95/98/NT/2000/XP for HMI. In addition, this bay controller can be set manually and this manual setting function helps user to interface easily.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2855-2857
• /
• 2005

디지털 선박(Digital Ship)이란 항해의 안전과 효율적 운행을 위해 항해, 조정, 상태감시 등 선박운행에 대한 전반적인 내용들을 컴퓨터를 통해서 구현하고 위성통신을 통해서 육상에서도 제어할 수 있는 완전 자동화 및 네트워크화 된 시스템을 의미하며 궁극적으로 무인화된 선박을 지향한다. 또한 통한항해시스템이란 선박의 경제적이고 안전한 운항을 위해 전자해도와 레이더를 이용하여 선박의 항로를 계획하고 감시하며 최적 항로 분석, 충돌/좌초방지 및 자동항법시스템과 연계한 자동항해 기능을 수행한다. 본 논문은 디지털 선박을 위하여 항해정보시스템과 항해 장비 통합장치 및 통신서버를 기반으로 한 전자해도와 레이더, 자동항법장치(autopilot) 및 각종 항해센서의 다기능 표시장치의 기능과 인터페이스 방안을 제시하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.6
• /
• pp.1372-1380
• /
• 1993

Surface trimming is an essential function in a surface modeler for representing multi-boundary surfaces, blended surfaces, and surfaces with islands or pockets. A procedure and a data structure for designing trimmed surfaces were developed. For generating a trimmed surface, edges (curves difined on a surface) are generated and trimmed first. Then the trimmed edges are selected sequentially to form a closed loop. The data of supporting surface, surface on which the trimmed surface is defined, and bounding edges are stored and used for the application such as NC programming, robot programming, graphic display, etc.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.1
• /
• pp.46-55
• /
• 2008

In this paper, we designed the bay control unit that is based on the microprocessors and integrates with the new technology of electrical, electronic, and mechanical fields. Nowadays the customers have required much more integrated multi-protection relay, monitoring, control devices and power management for better and easier maintenance, performance, electrical system analysis and communication according to new trend of switchboard This bay controller supplies those requirements of customers with easy handling and operation. This bay controller provides a graphic display with rear-lit liquid crystal LCD and push buttons as kinds of HMI(Human Machine Interface). This bay controller provides the parameter setting program, control setting program, various editors and fault recording and analysis program on Windows/95/98/NT/2000/XP for HMI. In addition, this bay controller can be set manually and this manual setting function helps user to interface easily.