• Title/Summary/Keyword: Multi Major

Search Result 1,723, Processing Time 0.027 seconds

A Study on the Major Building Material and Construction Method Influencing to IAQ through Full-Scale House Construction (실물 주거 시공을 통한 실내공기질에 영향을 미치는 주요 건축자재 및 시공방법에 관한 연구)

  • Yu Hyung-Ku;Park Jin-Chul;Rhee Eon-Ku
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.18 no.3
    • /
    • pp.262-269
    • /
    • 2006
  • Formaldehyde and total volatile organic compounds (TVOC) from building materials have been known as main causes of IAQ problem in Newly-Constructed Multi-Family Houses. Because Multi-Family Houses are built in large quantities in a similar manner, inappropriate selection of building materials and method will detrimental affect IAQ. This research aims to identify major causes of Indoor Air Pollutants in Multi-Family Houses, by constructing Mock-Up & One-Room House. As a result, self leveling concrete, door, and furniture construction is a major cause of indoor formaldehyde increase, and tile bond is TVOC, and urethane water proof is Etylbenzene, and Xylene.

Maintenance Model for Multi-Component System Considering Failure Types (고장형태(故障形態)를 고려한 다부품장비(多部品裝備)의 보전모형(保全模型))

  • Jeong, Yeong-Bae
    • Journal of Korean Society for Quality Management
    • /
    • v.18 no.2
    • /
    • pp.33-42
    • /
    • 1990
  • This paper proposes the maintenance model of multi-component system when the failure characteristics and types of components are considered. In this model, it is assumed that a system is composed of a critical component, a major component and a minor component. Also, failure types is classified into major failure and minor failure. If major failure occurs to critical component before system age replacement time, the system is renewed. If major failure does not occur until its age replacement time, preventive maintenance is performed at age replacement time T. Minimal repairs are carried out after each minor failure. Major component is minimal-repaired if any failure is discovered during operation. Minor component should be replaced as soon as any failure is found. This paper determines the optimal replacement time of the system which minimizes total maintenance cost. Numerical example illustrates these results.

  • PDF

The Effect of Job Satisfaction on the Major Satisfaction of Science and Engineering College Students According to Gender Differences (성별에 따른 이공계 전공교육만족이 일자리 만족에 미치는 영향)

  • Yoon, Jiyoung;Lim, Jungyeon
    • Journal of Engineering Education Research
    • /
    • v.22 no.4
    • /
    • pp.32-42
    • /
    • 2019
  • This study is aim to the effects of job satisfaction on the major satisfaction of science and engineering college students and also analyzed the mediating effects of future outlook of job and major relevance in career choice. To do this, structural equation modeling(SEM) and multi-group SEM were applied to data from 2016 Graduate Occupational Mobility Survey(GOMS). In the results of this study, the major satisfaction, future outlook of job and major relevance were positive effects on job satisfaction and the mediating effects of future outlook of job and major relevance were verified. And results of analysis according to gender difference, the coefficient of woman was smaller than man. Among major satisfaction had a positive effect on job satisfaction, job satisfaction fell for women who value their relevance to the major when choosing a job. Based on such results, universities need to further strengthen their role in helping them enhance their expertise through skills and learning about their majors.

Studies on the Operating Requirements of Multi-Resolution Modeling in Training War-Game Model and on the Solutions for Major Issues of Multi-Resolution Interoperation between Combat21 Model and TMPS (훈련용 워게임 모델의 다중해상도모델링 운영소요 및 전투21모델과 TMPS의 다중해상도 연동간 주요 이슈 해결 방안 연구)

  • Moon, Hoseok;Kim, Suhwan
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.21 no.6
    • /
    • pp.865-876
    • /
    • 2018
  • This study focuses on the operating requirements of multi-resolution modeling(MRM) in training war-game model and proposes solutions for major issues of multi-resolution interoperation between Combat21 model and tank multi-purpose simulator(TMPS). We study the operating requirements of MRM through interviews with defense M&S experts and literature surveys and report the various issues that could occur with low-resolution model Combat21 and high-resolution model TMPS linked, for example, when to switch objects, what information to exchange, what format to switch to, and how to match data resolutions. This study also addresses the purpose and concept of training using multi-resolution interoperation, role of each model included in multi-resolution interoperation, and issue of matching damage assessments when interoperated between models with different resolutions. This study will provide the common goals and directions of MRM research to MRM researchers, defense modeling & simulation organizations and practitioners.

Face Authentication using Multi-radius LBP Matching of Individual Major Blocks in Mobile Environment (개인별 주요 블록의 다중 반경 LBP 매칭을 이용한 모바일 환경에서의 얼굴인증)

  • Lee, Jeong-Sub;Ahn, Hee-Seok;Keum, Ji-Soo;Kim, Tai-Hyung;Lee, Seung-Hyung;Lee, Hyon-Soo
    • Journal of Broadcast Engineering
    • /
    • v.18 no.4
    • /
    • pp.515-524
    • /
    • 2013
  • In this paper, we propose a novel face authentication method based on LBP matching of individual major blocks in mobile environment. In order to construct individual major blocks from photos, we find the blocks that have the highest similarity and use different numbers of blocks depending on the probability distribution by applying threshold. And, we use multi-radius LBP histograms in the determination of individual major blocks to improve performance of generic LBP histogram based approach. By using the multi-radius LBP histograms in face authentication, we can successfully reduce the false acceptance rate compare to the previous methods. Also, we can see that the proposed method shows low error rate about 7.72% compare to the pervious method in spite of use small number of blocks about 44.59% only.

Maintenance Model of Multi-Component System Considering Characteristics of Components (부품특성(部品特性)을 고려한 다부품장비(多部品裝備)의 정비모형(整備模型))

  • Jeong, Yeong-Bae;Hwang, Ui-Cheol
    • Journal of Korean Society for Quality Management
    • /
    • v.17 no.1
    • /
    • pp.1-10
    • /
    • 1989
  • In general, the characteristics of components which consist of multi-component system can not be the same. This paper proposes a maintenance model of multi-component system considering the characteristics of each component. In this paper, multi-component system is divided into three components-critical unit, major unit and minor unit, respectively. This paper determines the optimal replacement time of the system which minimizes total maintenance cost, optimal replacement period of major unit and initial stock quantity of minor unit within this optimal replacement time. Numerical examples are shown when the failure times of each unit have gamma distribution.

  • PDF

A Study on the Actualizing the Public Interest of the Agricultural Broadcasting Channel in the Multi-Channel Age (다채널시대 농업전문방송채널에서의 공익성 실현 탐색 연구)

  • Rho, Gwang-June;Kim, Sung-Soo
    • Journal of Agricultural Extension & Community Development
    • /
    • v.10 no.2
    • /
    • pp.229-237
    • /
    • 2003
  • Since the 1960s in Korea, major broadcasting channels broadcasted farm television programs, however, airing of these programs were reduced in the 1990s. This was due to the declining number of farmers, and the low popularity rating of farm television programs. To cope with the situation, agriculture businessmen, farmers, and the officials concerned tried to acquire the independent farming television channel in cable television and satellite television, In 1998, one cable television channel started broadcasting, while another channel in satellite television began its broadcasting in 2001. One of the major concerns of the people in the broadcasting was actualization of the public interests in the new media multi-channel age. Recognizing this point, the study explored a few areas of concern such as conceptualizations of the public interest of the people in the digital age, examination of the surroundings of program production and marketing, and survey the media use behavior of target audience - rural residents; In the concept of the public interest, there are two points of view; market focused and democratic principle oriented. As the digitalization of broadcast advances and the logic of economics prevails, it is difficult to offer the public broadcasting service to farmers, however, democratic principles should be more emphasized. The rural resident prefer major terrestrial television channel to cable television and satellite television channel, and in media use behavior, the medium of major terrestrial television would be more useful for farm broadcasting.

  • PDF

Experimental Analysis of Bounce, Roll and Pitch Frequencies of Major Systems of a Large Truck using a Multi-axial Road Simulator (다축 로드 시뮬레이터를 이용한 대형트럭 주요 시스템의 바운스와 롤 및 피치 주파수의 실험적 분석)

  • Moon, Il-Dong;Oh, Chae-Youn
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.22 no.8 s.173
    • /
    • pp.128-135
    • /
    • 2005
  • This paper presents a scheme for experimentally analyzing bounce, roll and pitch frequencies of major systems of a large truck using a multi-axial road simulator. The excitation input (amplitude and frequency range) fur a frequency response test with the multi-axial road simulator is selected in order that bounce, roll and pitch modes are not coupled each other, the excitation amplitude can be reproduced in a specified excitation frequency range, and tires do not lose contact with posters. Three accelerometers, one gyroscope and four displacement meters are used in the frequency response test using the multi-axial road simulator. The reliability of the presented bounce mode frequency response test scheme is validated by comparing the result from a test using the multi-axial road simulator with the result from a road driving test. The road driving test is performed with velocities of 20km/h and 30km/h, and in an unladen state. The vertical accelerations at the cab and the front axle are measured in the road driving test. The roll and pitch mode frequency response tests are also performed with the presented frequency response test scheme. Roll and pitch frequencies of major systems of a large truck that are hard to acquire from a road driving test are analyzed as well as bounce frequency.

Evaluation of Accessibility to Multi-household$\cdot$Multi-studio Type House for Developing Senior Congregate Housing (노인공동생활주택 개발을 위한 다세대$\cdot$다가구주택의 접근성 평가)

  • Seo Ye-Young;Hong Hyung-Ock
    • Journal of Families and Better Life
    • /
    • v.23 no.6 s.78
    • /
    • pp.67-77
    • /
    • 2005
  • The purpose of this study was to evaluate the accessibility of existing multi-household multi-studio type house for developing Senior Congregate Housing. At present, in Korea, 'the Act of Promotion of Convenience and SEcurity for Disabled, Aged, Expectant Mothers, etc.' is applied to only public facilities. Therefore, this study evaluated 7 units -2 multi-household house and i multi-studio type house- in order to grasp the problems caused if the aged would dwell in that type of house, by the items of 'manual for improving the residency of the disabled' which was stipulated by the act above. The data was collected from May to June, 2005. The results were as follows: Firstly, the main entrances, exits and width of stairways had narrow spaces, the handles and bars did not conform with the terms presented in the manual above. Front doors should be opened like a bay for wheelchair use. Secondly, additional lighting apparatus and furniture should be added properly Thirdly, there were several inconformity to the manual for bathroom: improper handles, inadjustable washing-stands, unavailable spaces in front of toilet bowls, and out-of-place showers and taps. Finally kitchen cabinet design improper for wheelchair user. In conclusion, accessibility of existing multi-household or multi-studio type house was not good enough for the aged reside in. Those insufficiencies suggest that more specified standards to enhance accessibility to develop senior congregate housing should be added.

Reliability Analysis of Multi-functional Multi-state Standby System Using Weibull Distribution (와이블 분포를 이용한 다기능 다중상태 대기시스템의 신뢰도 분석)

  • Kim, Ji-Hye;Chung, Young-Bae
    • Journal of Korean Society of Industrial and Systems Engineering
    • /
    • v.40 no.3
    • /
    • pp.138-147
    • /
    • 2017
  • As the functions and structure of the system are complicated and elaborated, various types of structures are emerging to increase reliability in order to cope with a system requiring higher reliability. Among these, standby systems with standby components for each major component are mainly used in aircraft or power plants requiring high reliability. In this study, we consider a standby system with a multi-functional standby component in which one standby component simultaneously performs the functions of several major components. The structure of a parallel system with multifunctional standby components can also be seen in real aircraft hydraulic pump systems and is very efficient in terms of weight, space, and cost as compared to a basic standby system. All components of the system have complete operation, complete failure, only two states, and the system has multiple states depending on the state of the component. At this time, the multi-functional standby component is assumed to be in a non-operating standby state (Cold Standby) when the main component fails. In addition, the failure rate of each part follows the Weibull distribution which can be expressed as increasing type, constant type, and decreasing type according to the shape parameter. If the Weibull distribution is used, it can be applied to various environments in a realistic manner compared to the exponential distribution that can be reflected only when the failure rate is constant. In this paper, Markov chain analysis method is applied to evaluate the reliability of multi-functional multi-state standby system. In order to verify the validity of the reliability, a graph was generated by applying arbitrary shape parameters and scale parameter values through Excel. In order to analyze the effect of multi-functional multi-state standby system using Weibull distribution, we compared the reliability based on the most basic parallel system and the standby system.