• 제목/요약/키워드: Multi Channel Receiver

검색결과 254건 처리시간 0.022초

Current Mode Signaling 방법을 이용한 $0.18{\mu}m$ CMOS 3.2-Gb/s 4-PAM Serial Link Receiver (A $0.18{\mu}m$ CMOS 3.2-Gb/s 4-PAM Serial Link Receiver Using Current Mode Signaling)

  • 이정준;정지경;범진욱;정영한
    • 대한전자공학회논문지SD
    • /
    • 제46권10호
    • /
    • pp.79-85
    • /
    • 2009
  • 본 논문은 $0.18{\mu}m$ CMOS 공정을 이용하여 3.2 Gb/s serial link receiver를 설계하였다. High-speed links의 performance를 제한하는 가장 큰 요소는 transmission channel bandwidth, timing uncertainty가 있다. 이러한 문제점을 해결하기 위한 방법으로 multi-level signaling(4-PAM)을 이용하였다. 추가적으로 전송속도를 높이고 BER를 낮추기 위한 방법으로 current-mode amplifier, CML sampling latch를 사용하였다. 4-PAM receiver의 최대 데이터 전송속도는 3.2 Gb/s이다. BER은 $1.0{\times}10^{-12}$ 이하이며 chip size는 $0.5\;{\times}\;0.6\;mm^2$이고 1.8 V supply voltage에서 49mA current를 소모한다.

다단계 간섭 제거 기법을 이용한 MC-CMDMA 시스템 성능 분석 (Performance Analysis of an MC-CDMA System using Multi-stage Interference Cancellation)

  • 고균병;최수용홍대식
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1998년도 추계종합학술대회 논문집
    • /
    • pp.43-46
    • /
    • 1998
  • The performance of a receiver that empolys a multi-stage inter-ference cancellation scheme for uplink fading channel is analyzed when there is carrier frequency offset. And the conditions to permit the performance improvement are analytically obtained. Numerical results show the effectiveness of the proposed system under Rayleigh fading channel assuming that carrier frequency offset is present.

  • PDF

UWB-MIMO 시스템의 프리엠블 구조 설계 (Preamble Design for UWB-MIMO System)

  • 이홍원;서정원;정재학;조상인;최상성
    • 대한임베디드공학회논문지
    • /
    • 제2권1호
    • /
    • pp.66-75
    • /
    • 2007
  • In this paper, we have propose a preamble structure and synchronization/channel estimation method for UWB-MIMO which has 960Mbps transmit rate. The proposed structure is a compatible preamble structure for synchronization/channel estimation used by MIMO in MB-OFDM(Multi-Band OFDM) systems that are one of the standard systems of MBOA. The system is compatible with MB-OFDM using the proposed preamble structure. In this paper, we argue the problem in receiver part used by MIMO technique. And we simulate the proposed preamble for using synchronization/channel estimation. The simulation result shows the same performance compared with single receiver antenna.

  • PDF

MIMO 환경에서 OSUC 알고리즘을 적용한 V-BLAST 시스템의 성능분석 (Performance Analysis of V-BLAST System using OSUC Algorithm over MIMO)

  • 한덕수;이지훈;조성준;오창헌
    • 디지털콘텐츠학회 논문지
    • /
    • 제5권4호
    • /
    • pp.264-268
    • /
    • 2004
  • 최근 대용량 고속데이터 전송을 위해 여러 개의 송,수신 안테나를 이용하여 전송용량을 증가시킬 수 있는 MIMO(Multi-Input Multi-Output) 시스템에 대한 연구가 활발히 진행되고 있다. 본 논문에서는 먼저 MIMO 채널을 모델링하고, MIMO 채널에서 OSUC 복호알고리즘을 이용한 ZF수신기와 MMSE 수신기를 각각 적용하여 V-BLAST 시스템의 성능을 비교분석하였다.

  • PDF

채널 추정 알고리즘을 이용한 비동기식 IMT-2000 (W-CDMA) 시스템의 성능 분석 (Analysis of Asynchronous IMT-2000 (W-CDMA) Systems Using Channel Estimation Algorithm)

  • 김병기;나인학;전준수;김철성
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
    • /
    • pp.77-80
    • /
    • 2002
  • In this paper, we analyze a physical layer of W-CDMA .system and design a transmitter and receiver by using ADS (Advanced Design System). Also, we simulated a link level performance with different channel estimation algorithm in Jakes fading channel environment. For the channel estimator, we used the WMSA(Weighted Multi-Slot Averaging) algorithm, EGE(Equal Gain Estimation) algorithm and SSE(Symbol-to-Symbol Estimation) algorithm. This study will be useful in the analysis and design of W-CDMA system.

  • PDF

DS-CDMA 시스템을 위한 블라인드 적응 간섭 억제에 관한 연구 (A Study on Blind Adaptive Interference Suppression for DS-CDMA systems)

  • 우대호;윤태성;변윤식
    • 한국통신학회논문지
    • /
    • 제24권10B호
    • /
    • pp.1995-2003
    • /
    • 1999
  • DS-CDMA 시스템에서 통신 채널의 왜곡이나 간섭으로 인하여 확산 코드의 상호 상관 함수가 직교하지 않으므로 해서 시스템에서 성능을 열화 시키는 원근 문제와 다중 사용자 간섭 문제가 발생한다. 이 문제들은 시스템의 성능을 열화 시키므로 DS-CDMA의 성능을 향상시키기 위해서는 간섭을 효율적으로 억제하는 알고리즘이 요구되어진다. 본 논문에서는 constant modulus 알고리즘을 이용한 블라인드 적응 간섭 억제기를 제시하였다. 모의 실험결과 순방향 채널에서 사용된 블라인드 적응 간섭 억제기는 가우시안 채널 하에서는 정상 상태 응답일 때, 신호대 간섭비가 약 7[dB]정도 향상을 보였으며, Rayleigh 페이딩 채널 하에서는 잡음 대 간섭비가 약 4[dB]정도의 향상을 보였고, 다중 경로 하에서는 약11[dB]정도의 좋은 성능을 보였다. 따라서 DS-CDMA 시스템에서 제안된 수신기가 기존의 수신기보다 더 나은 성능을 가짐을 알 수 있었다.

  • PDF

타워형 태양열 발전용 공기흡수기의 열전달 성능해석 (Heat-Transfer Performance Analysis of a Multi-Channel Volumetric Air Receiver for Solar Power Tower)

  • 정의국
    • 대한기계학회논문집B
    • /
    • 제36권3호
    • /
    • pp.277-284
    • /
    • 2012
  • 타워형 태양열 발전용 체적식 공기흡수기의 열전달 성능 해석을 수행하였다. 타당한 관련문헌에 기초하여 채널 한 개의 벽과 공기 온도분포를 지정된 기하학적 크기와 입력조건에서 예측 할 수 있는 계산과정들이 제시되었다. 더 나아가서 흡수기 유용도의 수학적 모델이 온도프로파일 해석을 통해 유일하게 제시되었다. 흡수기 재질은 실리콘 카바이드이다. 공기 흐름을 유도하는 정사각형 직선채널 크기는 $2mm(W){\times}2mm(H){\times}0.2mm(t){\times}320mm(L)$이며, 모듈 한 개에는 225 개의 채널이 성형되었다. 일정한 일사량 및 공기유량 가정하에서 채널과 모듈 수의 변화에 따른 열전달량, 온도분포 및 유용도 추이가 제시되었다. 태양열 발전에 응용하기 위해서는 흡수기 출구 공기온도가 $700^{\circ}C$ 이상에 도달하여야 한다. 본 수치모델은 200 kW 급 타워형 태양열 공기흡수기의 설계에 사용되었으며, 지정된 기하학적 조건과 입력조건에서 요구되는 열전달 성능을을 만족하는 모듈 수를 얻을 수 있었다.

QAM 신호 복조시 자력 등화기와 $\theta$-정합을 이용한 위상 복구 회로 (Blind Equalizer and Carrier Recovery Circuit Using $\theta$-matching Algorithm in QAM Signal Demodulator)

  • 조웅기;장일순;정차근;조경록
    • 한국통신학회논문지
    • /
    • 제24권6A호
    • /
    • pp.920-930
    • /
    • 1999
  • 멀티 레벨(Multi-level) QAM(Quadrature Amplitude Modulation)은 전송대역의 효율적인 사용을 위한 전송방식의 하나로 많은 연구가 이루어져 실용화가 진행되고 있다. 이러한 전송방식을 사용하는 수신기에는 전송과정 중 채널에서 발생하는 ISI(Intersymbol Interference) 및 위상 오차(phase error)를 보상하기 위해서는 등화기(equalizer)와 위상 복구(carrier recovery) 회로를 사용해야 한다. 본 논문에서는 멀티 레벨 QAM 시스템에 적용할 수 있는 효과적인 수신기의 모델을 제안한다. 제안된 수신기에는 Godard 알고리즘을 사용하는 자력(blind) 등화기와 등화기의 출력 신호에 포함된 위상 에러를 복원하기 위해 $\theta$-정합을 이용하여 위상 오차를 복원하는 위상 복구 회로를 포함한다. 또한 다양한 채널모델에 대하여 제안한 수신기의 성능을 평가한다.

  • PDF

Multi-level & Multi-bandwidth 시스템에서 위성중계기 입력반송파 전력의 최적 할당 기법 (A Method for Optimal Power Assignment of the Transponder Input Carriers in the Multi-level & Multi-bandwidth System)

  • 김병균;최형진
    • 전자공학회논문지A
    • /
    • 제32A권9호
    • /
    • pp.1167-1176
    • /
    • 1995
  • This paper suggests a method for optimal power assignment of the satellite transponder input carriers in the Multi-level & Multi-bandwidth system. The interference and the noise effects analyzed for the optimal power assignment are intermodulation product caused by the nonlinear transponder characteristics, adjacent channel interference, co-channel interference, and thermal noise in the satellite link. The Fletcher- Powell algorithm is used to determine the optimal input carrier power. The performance criteria for optimal power assignment is classified into 4 categories according to the CNR of destination receiver earth station to meet the requirement for various satellite link environment. We have performed mathematical analysis of objective functions and their derivatives for use in the Fletcher-Powell algorithm, and presented various simulation results based on mathematical analysis. Since the satellite link, it is meaningful to model and analyze these effects in a unified manner and present the method for optimal power assignment of transponder input carriers.

  • PDF

Performance Analysis of Coordinated Random Beamforming Technique in Multi-cell Environments

  • Lee, Jong-Min;Jung, Bang-Chul
    • Journal of information and communication convergence engineering
    • /
    • 제8권4호
    • /
    • pp.393-398
    • /
    • 2010
  • For multi-cell environments, coordinated random beamforming technique in multiuser MIMO(multiple-input multiple-output) broadcast channel is considered. In order to mitigate severe interference at receivers, the multi-cell environments might require complex transmitter and receiver design because the scheduler decision based on full channel state information (CSI) in one cell must be intertwined with decision made by other cells' CSI. With limited CSI, however, this paper considers a scheme of randomizing transmitters' beamforming but being coordinated with other cell transmitters. The transmitters in each cell share random beamforming patterns and schedule data transmission within coherent scheduling period. The corandomized beams allow the users to be selected with the highest SINRs even in multi-cell environments. We analyze the performance of the proposed scheme. And numerical results show that the scheme achieves better performance than the conventional random beamforming when applying to multi-cell environments.