• Journal of the Korean Society of Propulsion Engineers
• /
• v.1 no.1
• /
• pp.82-88
• /
• 1997

The goal is to assess the effect of fatigue loading on mechanical properties of Fiberite 934/T300 laminates of pressure vessel using the recent variational mechanics analysis. This analysis has been useful in providing fracture mechanics interpretation of matrix microcracking in cross-ply laminates. This paper describes using the new energy release rate analysis for a fracture mechanics based interpretation of microcrack formation during fatigue loading. The master plot by modified Paris-law gives a complete characterization of a material system's resistance to microcrack formation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.896-901
• /
• 1990

A simulation analysis is presented for the position control of a single-link flexible manipulator whose end-effector is subjected to an impulsive force. Arm is rotated by a d.c. servomotor at the shoulder so that the end point stays precisely at its initial position even if the end effector is thumped with the impulsive loading. A gap sensor is used to measure the tip displacement. The control torque based on the PD control law is applied to the motor through the driver circuit. The control strategy is tested by means of computer simulation for the one-link flexible-arm prototype in the authers' laboratory at Tohoku Univ.

• Journal of Mechanical Science and Technology
• /
• v.18 no.3
• /
• pp.357-369
• /
• 2004

The purposes of the paper are to analyze the fracture phenomenon by delamination and cracking when the encapsulant of plastic IC package with polyimide coating shows viscoelastic behavior under hygrothermal loading in the IR soldering process and to suggest more reliable design conditions by the approaches of stress analysis and fracture mechanics. The model is the plastic SOJ package with the polyimide coating surrounding chip and dimpled diepad. On the package without cracks, the optimum position and thickness of polyimide coating to decrease the maximum differences of strains at the bonding surfaces of parts of the package are studied. For the model delaminated fully between the chip and the dimpled diepad, C(t)-integral values are calculated for the various design variables. Finally, the optimal values of design variables to depress the delamination and crack growth in the plastic IC package are obtained.

• Journal of Biomedical Engineering Research
• /
• v.11 no.1
• /
• pp.105-112
• /
• 1990

The main concepts in the design and construction of an motorized wheelchair for loading in the tar which is intended to drive a disabled to long distance. The wheelchair is basically a powered and folding, so it is designed to motorized manual wheel- chair by modularity method. The wheelchair hrs been installed with a power motor module, battery module, and drive & control module. The goal of this project is to develop a wheelchair that has multifunction and operated disabled who has variety impairment. So we ave currently working. Experimental results of the system approach our purpose, which is improved maneuverability, safety and can be loaded.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.10
• /
• pp.930-938
• /
• 2004

This paper presents the noise source identification of a car A/V system. There are two different kinds of noise sources noise generated by loading mechanism and rattle noise by externally forced vibration. A dynamometer has been made to produce stationary inertia to the loading mechanism of A/V system. Sound pressure spectra and sound intensity were measured by operating the dynamometer setup as various motor speeds, and the results were analyzed. A dominant rattle noise source about A/V system's components has been found by multi-dimensional spectral analysis. Residual spectrum method was applied for eliminating coherence between the vibration sources. In result, the dominant rattle noise source was identified by partial coherent output spectrum of individual vibration component.

• Proceedings of the KOSOMBE Conference
• /
• v.1990 no.05
• /
• pp.63-65
• /
• 1990

The main concepts in the design and construction of an motorized wheelchair for loading in the car which is intended to drive a disabled to long distance. The wheelchair is basically a powered and folding, so it is designed to motorized manual wheelchair by modularity method. The wheelchair has been installed with a power motor module, battery module, and drive & control module. The goal of this project is to develop a wheelchair that has multifunction and operated disabled who has variety impairment. So we are currently working.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.312-314
• /
• 1997

In this paper, Computer Aided Optimum Design Technique for Three-Phase Induction Motors is proposed. In the technique, reference magnetic flux, specific electric loading factor, specific magnetic loading factor(magnetic flux density) and current density are adopted as design parameters, and minimum total cost including material cost and loss power cost is adopted as a objective function which has to satisfy output condition too. As a result of application to the existing motor, it is proved that this technique is very effective in view of gradually increasing energy costs.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1392-1397
• /
• 2003

This paper deals with a control technique of eliminating the transient vibration of a twin-drive geared mechanical system. This technique is based on a model-based control in order to establish the damping effect at the driven machine part. The control model is composed of reduced-order electrical and mechanical parts. This control model estimates a load speed converted to the motor shaft. The difference between the estimated load speed and the motor speed is calculated dynamically and it is added to the velocity command to suppress the transient vibration generated at the load. This control technique is applied to a twin-drive geared system with backlash. In the previous work, the performance of this control method is examined by simulations. In this paper, the effectiveness of this control technique is verified by experiments. The settling time of the residual vibration generated at the loading inertia can be shortened down to about 1/2 of the uncompensated vibration level.

• Tribology and Lubricants
• /
• v.26 no.4
• /
• pp.224-229
• /
• 2010

A new test rig is presented to measure friction losses at journal bearings in a reciprocating compressor. This rig consists of a test bearing, torque sensor, driving motor and loading parts especially for vertical shaft. Friction losses are obtained by measuring torque between motor and test bearing. The experiments are carried out at several rotational speeds and temperatures. The test results are presented and discussed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.3
• /
• pp.28-38
• /
• 2003

Finite element analysis of cylinder heat/block compound under assembly, thermal and firing condition were performed. FE model including two cylinders with gasket, head bolts, liners and valve seats was used. FE modeling method and boundary conditions were introduced. Stress distribution and deformation of cylinder head and block under each loading condition were presented. Gasket pressure distribution and bore distortion level were predicted. Measured data of bore distortion was compared with the analysis results. The analysis result showed similar trends with the experimental data. High cycle fatigue analysis on the basis of this result has been performed in order to find the critical areas of the engine assembly.