Browse > Article

Finite Element Analysis of Cylinder Head/Block Compound  

Kim, Beom-Keun (Research & Development Division for Hyundai Motor Company & Kia Motors Corporation)
Chang, Hoon (Research & Development Division for Hyundai Motor Company & Kia Motors Corporation)
Publication Information
Transactions of the Korean Society of Automotive Engineers / v.11, no.3, 2003 , pp. 28-38 More about this Journal
Abstract
Finite element analysis of cylinder heat/block compound under assembly, thermal and firing condition were performed. FE model including two cylinders with gasket, head bolts, liners and valve seats was used. FE modeling method and boundary conditions were introduced. Stress distribution and deformation of cylinder head and block under each loading condition were presented. Gasket pressure distribution and bore distortion level were predicted. Measured data of bore distortion was compared with the analysis results. The analysis result showed similar trends with the experimental data. High cycle fatigue analysis on the basis of this result has been performed in order to find the critical areas of the engine assembly.
Keywords
Cylinder head; Cylinder block; Finite element analysis; Bore distortion; Gasket pressure distribution; High cycle fatigue;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 /
[ Hibbit;Karlsson & Sorenson ] / Abaqus/Standard,Example Problems I-II
2 Predictive and Measurement Technique in Cylinder Head Gasket Development /
[ T. Tronel;G. Witham ] / T&N Technical Symposium, Paper 30
3 CAE Approach for Multi-Layer Steel Cylinder Head Gaskets /
[ C. Chen;S. Obermaier;F. W. Popielas ] / SAE 2000-01-1348
4 An Analysis of Diesel Engine Cylinder Block-Liner-Gasket-Head Compound by Finite Element Method /
[ J. Kim;S. Ahn ] / Transaction of KSAE   과학기술학회마을
5 3D FE-Analysis of Cylinder Head/Block Compound /
[ U. Ergezen ] / AVL LIST GmbH
6 Analysis of Cylinder Bore Distortion During Engine Operation /
[ S. Abe;M. Suzuki ] / SAE 950541
7 Prediction of the Fatigue Life with the Finite Element Method /
[ W. Eichlseder;B. Unger ] / SAE 940245
8 /
[ Hibbit;Karlsson & Sorenson ] / Abaqus/Standard,Users Manual Volume I-III
9 Thermal and Mechanical Behavior of Gasoline Engine Head and Block /
[ J. Park;W. Joo;K. Kim ] / Transactions of KSAE
10 The GEOTZE Cylinder Distortion Measurement System and the Possibilities of Reducing Cylinder Distortions /
[ K. Loenne;R. Ziemba ] / SAE 880412
11 Analysis of Bore Distortion and Design for Low Oil Consumption /
[ S. J. Green;R. J. Tyrrell ] / Autotech'89 Congress