• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.207-210
• /
• 1996

This paper describes the analysis of the operation of the switched snubber in order to depress the surge voltage in the MOS-FET inverter. In this paper, the N-channel MOS-FET which operates faster than the P-channel MOS-FET was used for the inverter circuit. So, the inverter and switched snubber can operate at high-frequency in the order of MHz. The cause of generating the surge voltage in the high frequency inverter has been cleared, and then how to depress the surge voltage using the switched snubber consisting of an N-channel MOS-FET has been given. Furthermore, described is the power loss within the switched snubber which is made of an N-channel MOS-FET. The inverter having the N-channel MOS-FET used as a switched snubber can drive such a low impedance load such as mega-sonic transducer for a mega-sonic studied cleaner sufficiently.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.255-258
• /
• 1996

This paper describes a DC voltage controller for the DC power supply which is constructed using the full-bridged MOS-FET DC-to-RF power inverter and rectifier. The full-bridged MOS-FET DC-to-RF inverter consisting of four MOSFET arrays and an output power transformer has a control function which is able to control the RF output power when the widths of the pulse voltages which are fed to four MOS-FET arrays of the fall-bridged inverter are changed using the pulse width control circuit. The power conversion efficiency of the full-bridged MOS-FET DC-to-RF power inverter was approximately 85 % when the duty cycles of the pulse voltages were changed from 30 % to 50 %. The RF output voltage from the full-bridged MOS-FET DC-to-RF inverter is fed to the rectifier circuit through the output transformer. The rectifier circuit consists of GaAs schottky diodes and filters, each of which is made of a coil and capacitors. The power conversion efficiency of the rectifier circuit was over 80 % when the duty cycles of the pulse voltages were changed from 30 % to 50 %. The output voltage of the rectifier circuit was changed from 34.7V to 37.6 V when the duty cycles of the pulse voltages were changed from 30 % to 50 %.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1984년도 하계학술회의논문집
• /
• pp.30-32
• /
• 1984

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.87-90
• /
• 1995

When the ultrasonic transducer operating at l MHz for use in cleaning semiconductor wafers or other industsrial materials is driven from the MOS-FET DC-to RF inverter, the output power severely depends on the frequency of operation since the quality factor of the transducer is high. In order to tune to the eresonating frequency of the ultrasonic transducer, the drive signal frequency of the MOS-FET power inverter is automatically scananed until the frequency is set at the resonating frequency of the ultrasonic transducer is maximized. The control circuit consists of an output power sensing circuit, a PLL controller, a frequency standard, and other peripheral circuits. The operation was satisfactory when the transducer having an output of 600 W at 1 MHz was used.

• 반도체디스플레이기술학회지
• /
• 제16권2호
• /
• pp.49-54
• /
• 2017

In this paper, recent researches on new and renewable energy have been conducted due to problems such as energy exhaustion and environmental pollution, and new researches on high efficiency and high speed switching are needed. Therefore, we compared the efficiency by using high speed switching devices instead of IGBT which can't be used in high speed switching. The experiment was performed theoretically by applying the same parameters of the high speed switching devices which are the Cool MOS of Infineon Co., SiC C3M of Cree, and GaN FET device of Transform, by implementing the DC-DC boost converter and measuring the actual efficiency for output power and frequency. As a result, the GaN FET showed good efficiency at all switching frequency and output power.

• 한국통신학회논문지
• /
• 제25권8B호
• /
• pp.1469-1476
• /
• 2000

증가형 MOS FET에서 강반저의 경우 드레인 전류는 모두 드리프트에 기인하여 흐르기 때문에 I-V모델링시 수직전계와 수평전계를 함께 고려하여야한다. 특히 게이트전압 인가시 발생되는 수직전계는 표면이동도에 영향을 크게 주고 이로 인해서 캐리어들의 정상적인 흐름이 저해되는데 본 논문에서 제안한 다중 box분할법에 의하여 반전층의 깊이를 구하여 이동도 모델에 영향을 크게 미치는 반전층 내에서의 수직전계를 수치해석하였다.

• 한국전기전자재료학회논문지
• /
• 제26권9호
• /
• pp.707-711
• /
• 2013

Carbon nanotubes(CNT) has strength and chemical stability, greatly conductivity characteristics. In particular, MWCNT (multi-walled carbon nanotubes) show rapidly resistance sensitive for changes in the ambient gas, and therefore they are ideal materials to gas sensor. So, we fabricated NOx gas sensors structured MOS-FET using MWCNT (multi-walled carbon nanotubes) material. We investigate the change resistance of NOx gas sensors based on MOS-FET with ultra lean NOx gas concentrations absorption. And NOx gas sensors show sensitivity on the change of gate-source voltage ($V_{gs}=0[V]$ or $V_{gs}=3.5[V]$). The gas sensors show the increase of sensitivity with increasing the temperature (largest value at $40^{\circ}C$). On the other hand, the sensitivity of sensors decreased with increasing of NOx gas concentration. In addition, We obtained the adsorption energy($U_a$), $U_a$ = 0.06714[eV] at the NOx gas concentration of 8[ppm], $U_a$ = 0.06769[eV] at 16[ppm], $U_a$ = 0.06847[eV] at 24[ppm] and $U_a$ = 0.06842[eV] at 32[ppm], of NOx gas molecules concentration on the MWCNT gas sensors surface with using the Arrhenius plots. As a result, the saturation phenomena is occurred by NOx gas injection of concentration for 32[ppm].

• 전자공학회논문지
• /
• 제53권11호
• /
• pp.107-113
• /
• 2016

전원입력단에 사용되는 회로는 입력전원만을 사용할 수가 있다. 일반적인 전자회로는 입력전원을 이용하는 전압변환기에 의해 생성되는 2차전원을 이용하게 된다. 하지만 전원입력단의 저전압 및 과전압에 의한 고장에 대비하기 위한 보호회로는 2차 전원을 사용할 수가 없기 때문에, 입력전원만을 이용해서 구현이 되어야 한다. MOS FET의 문턱전압 특성을 이용한 저전압/과정압 검출회로는 50V 입력전압만을 이용해서, 정상적인 전압범위를 벗어나는 저전압/과전압 현상을 정상적으로 검출할 수가 있고, 기존의 Zener diode만으로 보호만 가능했던 것을 검출이 가능하게 되었고, 이상전압검출회로의 동작의 정확도를 결정하는 기준전압은 환경조건 등에 의해서 발생할 수 있는 모든 변수를 고려하면 최악조건 해석상으로 8.4%에서 2.5%로 향상되었다.

• 전자공학회논문지
• /
• 제53권5호
• /
• pp.69-76
• /
• 2016

MCT (MOS Controlled Thyristor)의 전류 구동능력은 도통상태의 MCT를 턴-오프 시킬 수 있는 능력, 즉 off-FET의 성능에 의해 결정되고, MCT의 주된 응용분야인 펄스파워 분야에서는 턴-온 시의 피크전류($I_{peak}$)와 전류상승기울기(di/dt) 특성이 매우 중요하다. 이러한 요구사항을 만족시키기 위해서는 MCT의 on/off-FET 성능 조절이 중요하지만, 깊은 접합의 P-웰과 N-웰을 형성하기 위한 삼중 확산공정과 다수의 산화막 성장공정은 이온주입 불순물의 표면농도를 변화시키고 on/off-FET의 문턱전압($V_{th}$) 조절을 어렵게 한다. 본 논문에서는 on/off-FET의 $V_{th}$를 개선하기 위한 채널영역 문턱전압 이온주입에 대하여 시뮬레이션을 진행하고 이를 토대로 제작한 MCT의 전기적 특성을 비교 평가하였다. 그 결과 문턱전압 이온주입을 진행한 MCT의 경우(활성영역=$0.465mm^2$) $100A/cm^2$ 전류밀도에서의 전압손실($V_F$)은 1.25V, 800V의 어노드 전압에서 $I_{peak}$ 및 di/dt는 290A와 $5.8kA/{\mu}s$로 문턱전압 이온주입을 진행하지 않은 경우와 유사한 특성을 나타낸 반면, $100A/cm^2$의 구동전류에 대한 턴-오프 게이트전압은 -3.5V에서 -1.6V로 감소하여 MCT의 전류 구동능력을 향상시킴을 확인하였다.

• ETRI Journal
• /
• 제6권3호
• /
• pp.37-42
• /
• 1984