• Polymer(Korea)
• /
• v.35 no.4
• /
• pp.284-288
• /
• 2011

For the purpose of the pre-industry production of poly(L-lactide) (PLLA) and full understanding of the supercritical polymerization system, large scale polymerization of L-iactide initiated by 1-dodecano/stannous 2-ethyl-hexanoate (DoOH/Sn(Oct)$_2$) was carried out in supercritical chlorodifluoromethane under various reaction conditions (time, temperature and pressure)and reactants (monomer and supercritical solvent) concentrations. A 3 L sized-reactor system was used throughout this study. The monomer conversion increased to 72% on increasing reaction time to 5 h. The molecular weight of PLLA product also increased to 68000 g/moi over the same period. An increase in monomer concentration resulted in a higher molecular weight, up to 144000 g/mol and 97% of monomer conversion. Raising the reaction pressure from 130 to 240 bar also resulted in an increased monomer conversion and molecular weight. To increase heat resistivity of PLLA, methanol treatment and heat-vacuum methods were evaluated. Both of them successfully improved the heat resistivity property of PLLA.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.29-33
• /
• 2012

Solution type pressure sensitive acrylic adhesives were synthesized from 2-ethylhexyl acrylate (2-EHA) as a base monomer and acrylic acid as a functional monomer. The surface energy and basic physical properties of synthesized PSA (pressure sensitive adhesives) were investigated as a function of contents of acrylic acid and crosslinking agent. The structures of adhesive were identified by FTIR. Viscosities and molecular weights of PSA were measured by a Brookfield viscometer and GPC, respectively. Consequently, molecular weight and viscosity increased as the contents of acrylic acid increased up to 6 wt% and then decreased at higher contents. Surface energy increased as the contents of acrylic acid increased owing to the increase of COOH groups, which yielded the enhancement of polarity of PSA. On the other hands, their peel strengths were inversely proportional to molecular weight and showed tendencies of decreasing as the contents of acrylic acid and crosslinking agent increased.

• Korean Journal of Materials Research
• /
• v.31 no.9
• /
• pp.532-538
• /
• 2021

In this study, a spray dryer is used to make granules of Y₂O₃ and YF₃, and then Y₅O₄F₇ is synthesized following heat treatment of them under Ar gas atmosphere at 600 ℃. Single and binary monomer mixtures are compared and analyzed to optimize photocurable monomer system for DLP 3D printing. The mixture of HEA and TMPTA at 8:2 ratio exhibits the highest photocuring properties and low viscosity with shear thinning behavior. The optimized photocurable monomer and synthesized Y₅O₄F₇ are therefore mixed and applied to printing process at variable solid contents (60, 70, 80, & 85 wt.%) and light exposure times. Under optimal light exposure conditions (initial exposure time: 1.2 s, basic exposure time: 5 s), YOF composites at 60, 70 & 80 wt.% solid contents are successfully printed. As a result of measuring the size of the printed samples compared to the dimensions of the designed bar type specimen, the deviation is found to increase as the YOF solid content increases. This shows that it is necessary to maximize the photocuring activity of the monomer system and to optimize the exposure time when printing using a high-solids ceramic slurry.

• Nuclear Engineering and Technology
• /
• v.53 no.12
• /
• pp.4130-4136
• /
• 2021

By polymerization of gadolinium methacrylate (Gd (MAA)₃), lead methacrylate (Pb(MAA)₂) and methyl methacrylate (MMA), Gd and Pb were chemically bonded into polymers. The X-ray shielding performance was evaluated by Monte Carlo simulation method, and the results showed that the more metal functional organic monomer, the better the shielding performance of terpolymers. When the X-ray energy is 65 keV, Gd (MAA)₃-containing polymers have better shielding performance than Pb(MAA)₂-containing polymers. Gd could compensate for the weak absorption region of Pb. Therefore, polymers containing both Gd and Pb enhanced shielding efficiency against X-ray in various low-energy ranges. For obtaining terpolymers with uniform monomer compositions, the relationship between the monomer composition of the terpolymers and the conversion level was optimized by calculating the reactivity ratios. The value of reactivity ratios of r (Gd (MAA)₃/Pb(MAA)₂), r (Pb(MAA)₂/Gd (MAA)₃), r (Gd (MAA)₃/MMA), r (MMA/Gd (MAA)₃), r (Pb(MAA)₂/MMA) and r (MMA/Pb(MAA)₂) was 0.483, 0.004, 0.338, 2.508, 0.255, 0.029. The terpolymers with uniform monomer composition could be obtained by controlling the monomer compositions or conversion levels. The results can provide new radiation protection materials and contribute to the improvement in nuclear safety.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.268-268
• /
• 2019

The purpose of this study is to understand the risk of chemical product, Styrene Monomer(SM), shipped in a vessel. SM is harmful chemical product which can make injury, explosion and/or fire in a vessel. The understand of SM risk is very important to protect seafarer's body and vessel safety. This research can be expected that the understanding of SM risk by a seafarer's to prevent accidents by SM explosion and/or fire.

• Korean Journal of Materials Research
• /
• v.26 no.6
• /
• pp.332-336
• /
• 2016

Three kinds of porous polymer were synthesized using a solvothermal of tri-4,4'-diphenylmethane diisocyanate (MDI-trimer) and different diamino monomers. The effects of the synthesis conditions and the monomer selection on the synthesis of porous polymer properties were studied. The results show that the synthesis of $NH_2$-containing monomer molecules smaller the microporous polymers was easy to implement; the specific surface areas of the polymers are related to the monomer ratio and the reaction time. The results show that the synthesized porous polymer had good hydrogen storage performance; the hydrogen storage ability improved with the addition of heterocyclic nitrogen.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.188-188
• /
• 2009

We have studied the optically compensated splay (OCS) mode using reactive mesogen (RM) monomer to reduce critical voltage, setting voltage and phase transition time from initial bend to splay state. Through the polymerization of UV curable RM monomer, the high pretilt angle from vertical alignment was formed at the surfaces. In this way, orientation of the LC with OCS mode can be achieved without setting voltage and improved electric characteristic.

• Journal of the Korean Chemical Society
• /
• v.24 no.1
• /
• pp.64-72
• /
• 1980

The synthesis of N-acrylylpyrrolidone has been carried out by the reaction of pyrrolidone and acrylyl chloride. The study on the copolymer of N-acrylylpyrrolidone and styrene is attempted.The copolymerization of N-acrylylpyrrolidone and styrene is carried out in benzene.Monomer reactivity ratio of N-acrylylpyrrolidone and styrene was calculated by Fineman and Ross equation. It is observed that the copolymer of N-acrylylpyrrolidone and styrene has random distributed acyl-lactam function on the vinyl polymer backbone.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.1-2
• /
• 2003

Some new synthetic routes for the preparation of poly (isobutyl vinyl ether) (P(IBVE)) having a controllable molar mass with narrow distribution via catalytic or photoinduced living cationic polymerization and their conversion to corresponding PVA have been developed. It was found that the combination of iodomethyl methyl ether (IMME)-zinc iodide is effective in the initiation of the catalytic and the various combinations of diphenyliodonium halides, well known photocationic initiators (DPIX) with zinc halides (ZnX$_2$) are also useful in photoinduced living cationic polymerization of isobutyl vinyl ether (IBVE). Polymerization both in the catalytic and photoinduced systems precede until the full consumption of the monomer and the rate of polymerization increases as the concentration of the catalyst or photoinitiator. The number average molar mass of the resulting polymer is proportional with % conversion, which is determined by the ratio of monomer consumed and the initial values of the catalyst or initiator. The living nature was also confirmed by subsequent monomer addition technique.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.676-679
• /
• 2005

Nano imprint Lithography (NIL) is regarded as one of the next-generation lithography technologies with EUV lithography, immersion lithography, Laser interference lithography. Because a Si wafer stamp and a quartz stamp, used to imprinting usually are very expensive and easily broken, it is suggested that master stamp is duplicated by PDMS and the PDMS stamp uses to imprint .For using the PDMS stamp, a thermally curable monomer resin was used for the imprinting process to lower pressure and temperature. As a result, NIL patterns were successfully fabricated.