• 한국한의학연구원논문집
• /
• 제1권1호
• /
• pp.273-287
• /
• 1995

Moire topography, a simple technique for three-dimensional quantitation, was used to provide interference fringe photographs of the human back with sufficient accuracy to be used for detecting patient with asymmetry due to scoliosis, the disease of cervix and lumbar, muscle dysfunction. Contour lines are a suitable and widely accepted method of describing a three-dimensional surface. In the moire technique, contour lines of an object are produced as interference fringes while the object is illuminated by a spotlight through a special grating. The fringe pattern is produced by the interference of the grating and its shadow on the object. A photograph of a moire pattern on the human back will permit an assessment of the overall body shape and the symmetry of the back. This study uses shadow moire topography. Moire topography provides a non-invasive technique for quantifying the shape of the human body. In the use of moire topography for the Oriental Medicine Diagnosis, the strength of moire lies in the ablility to detect change due to deformity of human body.

• 대한기계학회논문집
• /
• 제7권1호
• /
• pp.46-51
• /
• 1983

This study practiced to observe the creep behavior at specific temperature on Austentic SUB 27 stainless steel by Moire method. The results obtained from this study are summarized as follows; In tensile experiment, tensile strength and yielding strength decrease as the temperature increases. Yielding strength is equivalent to 60-70% of tensile strength. Reduction of Area and Elongation show minimum values at 300.deg. C. The results of Moire method using Moire heating resisting grid coincide with LVDT result. Therefor, It is proved that the Moire method has great merit in strain measurement of a creep behavior. In homologous at temp. 0.2 or less, creep behavior is very small amount. But, in more than 0.3, creep behavior is very active. Creep rate increase as temperature increase and creep rate is proportional to .alpha. values of experimental equation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.402-406
• /
• 1995

The shadow moire is one the optical techniques which able to give contour lines of an object with respect to a master grating plane. The moire patterns are issued from the superposition of a grating and its shadow projected on the surface of an object. But in the conventional shadow moire method the reference grating and deformed grating are mutually dependent, it is impossible to obtain uniform phase shifts on the whole field by moving the reference grating. Here we propose ane trial to apply phase shifting to conventional shadow moire. When, in the conventional arrangement, Phase-shifting that is sctually constant regardless of fringe orders is achieved by moving the grating and the light source. Finally we obtained a better result by using this procedure and applied the phase shifting shadow moire to three dimensional measurement.

• 대한추나의학회지
• /
• 제4권1호
• /
• pp.141-153
• /
• 2003

Objectives : The purpose of this study is researching for correlation between Moire topography results and questionnaire which include obesity rate, height, weight, posture, pain aspect (low back pain, headache, fatigue, neck pain etc), studying posture, school attendance method, menarche. Methods : The authors practiced Moire topography and questionnaire for primary & middle school 24,419 students [male 12,843, female 11,576] in Jeonbuk, korea in 2002. After we distinguished students who had abnormal finding in Moire topography and statistically analysed the data. Results : According to this research, the abnormal finding in Moire topography results was 37.3% (9,105 students), and students needed X-ray re-examination were 3.9% (953 students). According to statistical analysis, male/female and primary/middle school students have no difference in deformity degree of the body surface examined by Moire. Height and weight have low correlation with deformity degree of the body surface examined by Moire and menarche, pain aspect have no correlation. But, school attendance method by bicycle and $90^{\circ}$upright sitting in study posture is the best way to decrease the deformity degree of the body surface examined by Moire. Conclusions : Following this research, throughout Moire topography could detect trunk asymmetry that couldn't be found existing X-ray examination, and school attendance by bicycle and $90^{\circ}$upright sitting in study posture is good for school students to prevent back deformity.

• 비파괴검사학회지
• /
• 제15권2호
• /
• pp.386-394
• /
• 1995

시편의 미소 변형을 측정하는 Moire법의 한 응용 방법인 미스얼라이먼트법을 이용하여 발생된 화상을 푸리에 변환에 의하여, 주파수 함수로 전환시킨 후 표준화 이론을 적용하여 시편의 변형을 Moire 무늬로 설명하고, 이를 뒷받침하는 식들을 유도하였다. 특히, 미스얼라인먼트법에서 발생되는 무늬의 회전 현상이나 무의 개수의 증가를 설명하고 이에 관련된 식들을 얻었다. 또한 무의 차수와 변형율과의 상관 관계를 보여주는 식을 주파수 벡터법과 기하하적인 방법으로 각각 유도하여, 이들 두식이 통상의 Moire법에서도 적용가능한 보다 유용한 식임을 확인하였다.

• 한국정밀공학회지
• /
• 제15권10호
• /
• pp.96-102
• /
• 1998

In this study, the theory and application of phase-shifting shadow moire topography is focused on the non-contact measurement of object surfaces for practical use in the field of production engineering. Shadow moire topography has been studied during last few decades in the area of the optical physics, and now its mathmatical theory has been established. Generally, in case of the classical shadow moire topography, the sensitivity is a few tenths of millimeter in best cases. Here we tried the application of phase-shifting method to the conventional shadow moire topography. But the reference grating and the deformed grating are mutually dependent because it is impossible to obtain uniform phase shifts on the whole Held. Therefore it is difficult to use a phase-shifting method in shadow moire topography. However, it was shown that constant phase-shifting was able to be measured by moving both the grating and light source. Finally we obtained a better result by using this procedure and applied the phase-shifting shadow moire to three dimensional object measurement.

• 한국정밀공학회지
• /
• 제17권10호
• /
• pp.147-154
• /
• 2000

A new hardware compensation method reducing displacement measurement errors, caused by tilt of index scale in moire linear encoders, has been developed. In conventional moire linear encoders, the detectors are aligned perpendicular to the line of moire fringes this structure is very sensitive to an unwanted tilt of the gratings. In this paper, a newly designed grating, called a phase-modulated grating, is developed to compensate for non-orthogonal errors. By using the phase-modulated grating instead of a conventional index, it is possible to reduce non-orthogonal errors of moire linear encoders.

• 대한기계학회논문집
• /
• 제7권3호
• /
• pp.286-293
• /
• 1983

This study measures polar compressive thickness strain and radius of curvature of the bulge through Moire' method in bulge test. Hill's and Alexander's bulge theories, instability conditions derived by Swift's, Hill's, Alexander's and wang's theories, are also investigated, compared with Moire' experimental results. In order to review and compare with Hill's and Alexander's bulge theories, the relationships between radius of curvature of the bulge and polar height, between polar compressive thickness strain and polar height, are used. Mild steel, soft copper and commercial pure aluminum are used in Moire' experiment. According to this study, Hill's and Alexander's bulge theories, instability conditions derived by Swift's, Hill's, Alexander's and Wang's theories are agreement to Moire' experiment results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.841-842
• /
• 2012

• 대한추나의학회지
• /
• 제1권1호
• /
• pp.119-124
• /
• 2000

This study focused on the method of interpretation Meridian muscle's moire topography. We want to know the meaning of structural problems according to moire topography on muscle image. These points in one contour have the same distances from the screen to patient' backward.