• 한국광학회지
• /
• 제16권4호
• /
• pp.345-353
• /
• 2005

포토 다이오드(photodiode) 조정 방식을 이용해서, 비전 시스템을 장착한 고가의 정밀 자동 조립조정 장비 없이 홀로그램 픽업 모듈을 제작하는 새로운 방법을 제안하였다. 저가격화를 위해서 리드 프레임형의 반도체 레이저와 COB(Chip on Board)형의 포토 다이오드를 사용했고, 초점 에러 신호(focus error, FES) 검출방법은 스팟 사이즈 검출법(spot size detection, SSD), 트랙 에러 신호(tracking error, TES) 검출방법은 삼빔법(3 beam method)을 이용했다. 이를 만족하는 픽업 홀로그램 모듈 광학계를 설계하고, 조립조정 프로세스 수립 및 시스템을 제작하였으며, 조립된 홀로그램 모듈을 이용하여 CD에서 데이터를 검출하는 실험을 통해 제안된 포토 다이오드 조정방식의 유용함을 입증하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2719-2724
• /
• 2003

In this paper, we deal with the kinematic and dynamic modeling of hybrid robotic systems that are constructed by combination of parallel and serial modules or series of parallel modules. Previously, open-tree structure has been employed for dynamic modeling of hybrid robotic systems. Though this method is generally used, however, it requires expensive computation as the size of the system increases. Therefore, we propose an efficient dynamic modeling methodology for hybrid robotic systems. Initially, the dynamic model for the proximal module is obtained with respect to the independent joint coordinates. Then, in order to represent the operational dynamics of the proximal module, we model virtual joints attached at the top platform of the proximal module. The dynamic motion of the next module exerts dynamic forces to the virtual joints, which in fact is equivalent to the reaction forces exerted on the platform of the lower module by the dynamics of the upper module. Then, the dynamic forces at the virtual joints are distributed to the independent joints of the proximal module. For multiple modules, this scheme can be constructed as a recursive dynamic formulation, which results in reduction of the complexness of the open-tree structure method for modeling of hybrid robotic systems. Simulation for inverse dynamics is performed to validate the proposed modeling algorithm.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2000년도 2nd Korea-Japan Advanceed Semiconductor Packaging Technology Seminar
• /
• pp.39-45
• /
• 2000

A small camera module fabricated by including bare chip bonding methods is utilized to realize advanced mobile devices. One of the driving forces is the TOG (Tape On Glass) bonding method which reduces the packaging size of the image sensor clip. The TOG module is a new thinner and smaller image sensor module, using flip chip interconnection method with the ACP (Anisotropic Conductive Paste). The TOG production process was established by determining the optimum bonding conditions for both optical glass bonding and image sensor clip bonding lo the flexible PCB. The bonding conditions, including sufficient bonding margins, were studied. Another bonding method is the flip chip bonding method for DSP (Digital Signal Processor) chip. A new AC\ulcorner was developed to enable the short resin curing time of 10 sec. The bonding mechanism of the resin curing method was evaluated using FEM analysis. By using these flip chip bonding techniques, small camera module was realized.

• 한국디지털건축인테리어학회논문집
• /
• 제5권1호
• /
• pp.1-8
• /
• 2005

The major goal of this study is drawing design plan factors considering residents' life cycle and life style when remodeling design is needed. By drawing such design factors, the study will propose an alternative remodeling design plan. Such design method was defined as Multi-Dimensional module design method. And constructing data-system based on Multi-Dimensional module was secondary goal in this study. The details are as follows: Based on analysis of Residents' demand for remodeling and features of emotion-design applied to remodeling, the system which is suitable for application in remodeling design method was conducted. Based on the type of construction materials, the level value was set up according to emotion-factor application. Also, by conducting coding operation according to the distinction of construction materials, this study seeks the unit drawing method of information for constructing emotion-information system.

• 반도체디스플레이기술학회지
• /
• 제11권2호
• /
• pp.39-43
• /
• 2012

This paper presents a study on the design of a pulling module for silicon ingot and an apparatus of manufacturing silicon single crystal ingot using the same method. The pulling module is conceptually designed by using TRIZ. Czochralski method(CZ) is representative way to manufacture single crystal ingot for wafers. The seed can be broken by high tension which is caused by large weight of a silicon ingot. The solution of this problem has been derived using 6SC(6 steps creativity)TRIZ. The pulling module is actuated by DC motor and rollers. High tension in the seed is removed by the rotate-elevate motion of rollers in the pulling module. A rubber belt is included in the rotate-elevate mechanism for increasing friction between rollers and silicon ingot.

• Communications for Statistical Applications and Methods
• /
• 제17권6호
• /
• pp.879-889
• /
• 2010

본 논문은 국민계정의 문화부문 위성계정인 문화위성계정의 체계와 우리나라가 문화위성계정을 작성하기 위해 필요한 사항 등을 내용으로 한다. 문화위성계정은 각기 개별적 기능을 갖는 5개 부문으로 구성하도록 권고되고 있다. 동 권고안에 의하면 제 1부문부터 제 4부문까지는 각각 해당부문의 공급과 수요측면의 통계를 수록하도록 되어 있고, 제 5부문은 참고사항 모듈(documentation module)로 편제하도록 권고되고 있다. 문화위성계정의 제 1부문은 문화활동 개요 모듈(macro-information module), 제 2부문은 문화생산량 모듈(quantity/volume output module), 제 3부문은 특성 모듈(characterization module), 제 4부문은 목표분석 모듈(targeted analysis/analytical module)로 구성된다.

• 한국태양에너지학회 논문집
• /
• 제32권3호
• /
• pp.11-18
• /
• 2012

To expect accurately the maximum power of solar cell module under various installation conditions, it is required to know the performance characteristics like temperature dependence. Today, the PV (photovoltaic) market in Korea has been growing. Also BIPV (building integrated photovoltaic) systems are diversified and become popular. But thermal dependence of PV module is little known to customers and system installers. In IEC 61215,a regulation for testing the crystalline silicon solar cell module, the testing method is specified for modules. However there is limitation for testing the module with diverse application examples. In extreme installation method, there is no air flow between rear side of module and ambient, and it can induce temperature increase. In this paper, we studied the roof type installation of PV module on the surface of one-axis tracker system. We measured temperature on every component of PV module and compared to open-rack structure. As a result, we provide the foundation that explains temperature characteristics and NOCT (nominal operation cell temperature) difference. The detail description will be specified as the following paper.

• 유통과학연구
• /
• 제21권2호
• /
• pp.45-52
• /
• 2023

Purpose: The Malaysia Education Blueprint is primarily concerned with the transformation of students' minds through the curriculum offered at the school level (2013-2025). Diversity in the application of teaching and learning methods is one means of achieving the transformation of students' minds through the Secondary School Standard Curriculum. Consequently, the production of ExSheetLink's Module for Accounting Education is the primary outcome of this study, which had three objectives: the need for ExSheetLink's Module in the process of producing financial statements for Accounting Students in secondary school to the Accounting Teacher; and the design of ExSheetLink's Module that meets the entire process in the production of financial statements for Accounting Students in secondary school based on the Documents Curriculum and the Accounting Students' needs. Research design, data and methodology: This study outlines the research framework for module development in accordance with the Design and Development Research Method, which combines multiple research techniques (Mixed Method). Results: The development of ExSheetLink's Module is completed and can be used for the level of effectiveness purposes. Conclusion: The transformation of Accounting Students' minds is a success thanks to the ExSheetLink Module. Researchers also suggested that all Malaysian Secondary School accounting students test the ExSheetLink Module.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.318-321
• /
• 2000

This paper propose the method of constructing the highly efficiency adder and multiplier systems over finite fie2, degree of uk terms, therefore we decrease k into m-1 degree using irreducible primitive polynomial. We propose two method of control signal generation for perform above decrease process. One method is the combinational logic expression and the other method is universal signal generation. The proposed method of constructing the highly adder/multiplier systems is as following. First of all, we obtain algorithms for addition and multiplication arithmetic operation based on the mathematical properties over finite fields, next we construct basic cell of A-cell and M-cell using T-gate and modP cyclic gate. Finally we construct adder module and multiplier module over finite fields after synthesize ${\alpha}$$\^$k/ generation module and control signal CSt generation module with A-cell and M-cell. Then, we propose the future research and prospects.

• 한국태양에너지학회 논문집
• /
• 제36권2호
• /
• pp.65-72
• /
• 2016

PV module is installed in various outdoor conditions such as solar irradiation, ambient temperature, wind speed and etc. Increase in solar cell temperature within PV module aggravates the behaviour and durability of PV module. It is difficult to measure temperature among respective PV module components during PV module operating, because the temperature within PV module depends on thermal characteristics of PV module components materials as well as operating conditions such as irradiation, outdoor temperature, wind etc. In this paper, simulation by using finite element method is conducted to predict the temperature of each components within PV module installed to outdoor circumstance. PV module structure based on conventional crystalline Si module is designed and the measured values of thickness and thermal parameters of component materials are used. The validation of simulation model is confirmed by comparing the calculated results with the measured temperatures data of PV module. The simulation model is also applied to estimate the thermal radiation of PV module by front glass and back sheet.