• 전자공학회논문지A
• /
• 제30A권9호
• /
• pp.59-70
• /
• 1993

An efficient test method based on march test is presented to cover line leakage failures associated with bit and word lines or mega bit DRAM chips. A modified column march (Y-march) pattern is derived to improve fault coverage against the data retention failure. Time delay concept is introduced to develop a new column march test algorithm detecting various data retention failures. A built-in test circuit based on the column march pattern is designed and verified using logic simulation, confirming correct test operations.

• 한국전자파학회논문지
• /
• 제18권2호
• /
• pp.191-198
• /
• 2007

PCB 설계시 전송선간에 발생하는 전자기적 결합 현상은 장비의 동작을 저감시키는 요인이 될 수 있다. 이런 결합 현상은 전송선과 라이저를 통해 흐르는 전류에 의해 생기는 전자기계에 의해 발생한다. 본 논문에서는 PCB상에 놓여 있는 굽은 결합 선로의 누화를 해석하기 위한 개선된 방법을 제안하고 고찰해 보고자 한다. 굽은 결합 선로에 대한 기존의 누화 해석은 굽은 결합 선로의 굽은 지점을 기준으로 각 구간으로 나누고 각 구간을ABCD 행렬로 나타내어 이를 직렬 연결한 방법을 이용하였다. 하지만 본 논문에서 제안하는 누화 해석 방법은 기존의 방법과는 달리 결합 현상을 계산할 때의 결합 구간을 소스가 인가되는 전송선을 인접한 전송선으로 수직 투영시킨 구간만이 아닌 인접한 전송선의 전 구간에 영향을 준다고 보고 계산을 하는 개선된 회로 접근법에 의해 계산하였다. 마지막으로, 몇 가지 굽은 결합 선로 모델들에 대해서 계산한 결과와 측정한 결과를 비교함으로써 본 논문에서 제안하는 누화 해석 방법의 타당성을 보였다.

• 전기의세계
• /
• 제21권1호
• /
• pp.7-12
• /
• 1972

General steady state equivalent circuits are derived for the family of single phase motor having two windings with non-quadrature. First, the fundamental voltage equations of motor are derived by Faraday-Krichhoff's low in the fiew of the flux distribution in the modified motor with Kron primitive machine. Those equations are arranged in to f-b equations by transformation matrix. To using the above equations for circuit; 1) The concept of current-source was much help to sove the realtions between matrix impedance equation and circuit analysis 2) The simplification of the circuit to the mutual impedance matrix elements is easy to considerations of motor characteristics in the case of inserted external auxiliary winding impedance. Finally, this equivalent circuit showing as a single phase induction motor with quadrature winding is described by each conditions.

• Journal of Power Electronics
• /
• 제13권4호
• /
• pp.729-736
• /
• 2013

Knowledge of a power semiconductor's operating temperature is important in circuit design and converter control. Designing appropriate circuitry that does not affect regular circuit operation during virtual junction temperature measurement at actual operating conditions is a demanding task for engineers. The proposed method enables virtual junction temperature estimation with a dedicated modified gate driver circuit based on real-time measurement of a semiconductor's quasi-threshold voltage. A simulation was conducted before the circuit was designed to verify the concept and to determine the basic properties and potential drawbacks of the proposed method.

• 한국세라믹학회지
• /
• 제50권2호
• /
• pp.163-167
• /
• 2013

A modified two-point impedance spectroscopy technique exploits the geometric constriction between an electrolyte and a cathode with an emphasis on semispherical-shaped electrolytes. The spatial limitation in the electrolyte/electrode interface leads to local amplification of the electrochemical reaction occurring in the corresponding electrolyte/electrode region. The modified impedance spectroscopy was applied to electrical monitoring of a YSZ ($Y_2O_3$-stabilized $ZrO_2$)/SSC ($Sm_{0.5}Sr_{0.5}CoO_3$) system. The resolved bulk and interfacial component was numerically analyzed in combination with an equivalent circuit model. The effectiveness of the "spreading resistance" concept is validated by analysis of the electrode polarization in the cathode materials of solid oxide fuel cells.

• 한국광학회지
• /
• 제19권1호
• /
• pp.60-67
• /
• 2008

전광 그레이코드(gray code) 이진코드(binary code) 변환기를 상용화 전산모사 프로그램(VPI)을 이용하여 처음으로 구현하였다. 전자회로 디자인 방법을 상호 이득변조를 이용한 전광 논리회로에 적합하도록 변형하여, 이상적이지 않은 전광 논리게이트에 의한 신호 왜곡이 최소화 되도록 하였다. 2.5 Gbps의 20 dB 소광비를 가지는 입력 신호에 대해, 신호재생기 없이 가장 많이 왜곡된 출력 신호에 (최하위 비트-LSB) 대해 약 4 이상의 Q값을 얻을 수 있었다. 또한 그레이 코드 이진코드 변환기를 디자인하면서, 이단 단순화 방법을 (two-level simplification method) 변형하여, 그레이코드 이진코드 변환기뿐 아니라 일반적인 전광 회로에 적용할 할 수 있는 일반적 방법을(일단 단순화 방법: one-level simplification method) 얻을 수 있었다.

• 정보저장시스템학회논문집
• /
• 제2권3호
• /
• pp.208-213
• /
• 2006

The present state of the design of swing arm actuators for optical disc drives is to obtain the high efficient dynamic characteristics within a very compact volume. As a necessary consequence, the need of the small form factor (SFF) storage device has been arisen as major interests in the information storage technology. In this paper, we suggest the miniaturized swing arm type actuator that has high efficient dynamic characteristics for SFF optical disk drive (ODD). For the operating mechanism, it uses a tracking electromagnetic (EM) circuit for a focusing motion together. Moreover, due to the size constraint, the thermal stability of optical head is important. Therefore, the actuator is designed to emit the heat, which is generated by optical pick-up, along the actuator body easily. Initial model is designed based on the topology optimization method considering the thermal conductivity. Then, the structural parts of the actuator are modified to maintain the high sensitivity and to have wide control bandwidth by the design of experiments method (DOE) and new concept of decreasing mass and inertia. Finally, a swing arm type actuator for SFF ODD is suggested and its dynamic characteristics are verified.

• 대한의용생체공학회:의공학회지
• /
• 제18권3호
• /
• pp.291-299
• /
• 1997

As a microimaging device detecting gamma rays emitted from small lesions or tumors during operation, the intraoperative surgical probe has been proposed and is now under development. We have designed a multipurpose portable gamma prove system and evaluated the performance both for the absolute counting purpose of residual radioactivities and for the localizing capability of gamma events using the NaI(Tl) crystal and two types of photomultiplier tubes(PMTs). Counting efficiencies in the range of routine clinical use of radiation dose were measured using the assembly of single channel PMTs and 0.5 inch thick NaI(Tl) crystal of 1 inch diameter. The positioning of gamma events for imaging purpose requires the multiple channel PMTs with appropriate positioning electronics. We have designed a simple and reliable positioning circuit based on the concept of modified Anger. In preliminary experiments using the multiple channel PMT of 3 inch diameter and the dim lighth source, we were able to trace and localize the correct position with reduced positioning error by the use of two multiplier/divider chipset and simplified peripherals. The energy resolutions for the counting gamma probe measured as full width at half maximum(FWHM) for Cs-137, F-18, Tc-99m were 12%, 13%, and 36%, respectively. The spatial resolution for the imaging gamma probe measured as FWHM for green LED was 2.9 mm. The results indicate that the currently developing probe is very promising and could be very useful for many applications in nuclear medicine. Future studies will include developing collimators, improving interface hardwares, and evaluating the system with clinical data.