DOI QR코드

DOI QR Code

Crosstalk Analysis of Bent Coupled Lines on a PCB

PCB상에 놓여 있는 굽은 결합 선로의 누화 해석

  • Han, Jae-Kwon (Department of Radio Science & Engineering, Chungnam National University) ;
  • Park, Dong-Chul (Department of Radio Science & Engineering, Chungnam National University)
  • Published : 2007.02.28

Abstract

The electromagnetic coupling between transmission lines in PCB design can degrade the performance of equipment operations. The coupling phenomenon is caused by electromagnetic fields generated by the currents on the transmission lines and the risers. In this paper, an improved method of crosstalk analysis for bent coupled lines on a PCB is proposed and investigated. In the previous cascading method combined with circuit-concept approach, bent coupled lines are devided into sections and each section is represented by ABCD matrix and then they are cascaded. In the proposed method, the crosstalk of bent coupled lines is calculated by the modified circuit-concept approach, where the coupled region is not restricted to the region projected by a generator line on a receptor line but is the total length of receptor line in calculating the forcing terms. Finally, the accuracy of the proposed approach is verified by comparing the calculated results with the measured ones for several bent coupled-line examples.

PCB 설계시 전송선간에 발생하는 전자기적 결합 현상은 장비의 동작을 저감시키는 요인이 될 수 있다. 이런 결합 현상은 전송선과 라이저를 통해 흐르는 전류에 의해 생기는 전자기계에 의해 발생한다. 본 논문에서는 PCB상에 놓여 있는 굽은 결합 선로의 누화를 해석하기 위한 개선된 방법을 제안하고 고찰해 보고자 한다. 굽은 결합 선로에 대한 기존의 누화 해석은 굽은 결합 선로의 굽은 지점을 기준으로 각 구간으로 나누고 각 구간을ABCD 행렬로 나타내어 이를 직렬 연결한 방법을 이용하였다. 하지만 본 논문에서 제안하는 누화 해석 방법은 기존의 방법과는 달리 결합 현상을 계산할 때의 결합 구간을 소스가 인가되는 전송선을 인접한 전송선으로 수직 투영시킨 구간만이 아닌 인접한 전송선의 전 구간에 영향을 준다고 보고 계산을 하는 개선된 회로 접근법에 의해 계산하였다. 마지막으로, 몇 가지 굽은 결합 선로 모델들에 대해서 계산한 결과와 측정한 결과를 비교함으로써 본 논문에서 제안하는 누화 해석 방법의 타당성을 보였다.

Keywords

References

  1. C. R. Paul, Analysis of Multiconductor Transmission Lines, New York, Wiley-Intersciences, 1994
  2. Y. Kami, W. Liu, 'Analysis of coupling between transmission lines in arbitrary directions', in IEEE Intn. EMC Symp. Denvor, pp. 952-957, 1998
  3. S. W. Park, J. C. Ju, and D. C. Park, 'Analysis of crosstalk between finite-length multiconductor transmission lines on a PCB by using a circuit-concept approach', IEICE Trans. Commun., vol. E88-B, no. 8, pp. 3189-3194, Aug. 2005 https://doi.org/10.1093/ietcom/e88-b.8.3189
  4. 김종호, 한재권, 박동철, '구부러진 전송선에서 비아 홀 펜스에 의한 누화 감소 해석', 한국전자파학회논문지, 16(10), pp. 1036-1042, 2005년 10월
  5. 한재권, 박동철, '4층 기판에서 비아로 연결된 결합 선로의 누화 해석', 한국전자파학회논문지, 17(6), pp. 529-537, 2006년 6월