• The KIPS Transactions:PartA
• /
• v.17A no.4
• /
• pp.203-212
• /
• 2010

Recently, in automotive industry, there have been many researches related with hardware components and embedded software which controls hardware components. Since most of embedded software is tightly dependent on car manufacturers, there were some problems in reusability and interoperability of automotive software. In order to solve these problems, AUTOSAR standardized the component-based software architecture of automotive software. In AUTOSAR, several modeling diagrams should be described and their dependencies are also checked. Currently, a few company developed the prototypes of tools supporting AUTOSAR. In this paper, a component modeling tool based on AUTOSAR 3.0 is developed for enhancing the usability of existing tools using Eclipse GMF. The tool is composed of a graphical component modeling tool and a graphical network topology tool. Since these tools are generated based on GMF without hard coding, it is relatively easy to customize the tools for adopting company‘s needs and easy to follow the improvement of the standard and development environments.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.56.3-56.3
• /
• 2018

We proceed to develop the control software of GMACS, which is a wide-field, multi-object, moderate-resolution optical spectrograph for the Giant Magellan Telescope (GMT). Flexure Compensation System (FCS) prototype is one of the electronics and mechanical prototypes for GMACS. In this poster, we present the software design for the FCS prototype by using the software system modeling language, SysML. We also show two development tools to control the prototype that communicates via EtherCAT: using TwinCAT and Visual C++ on Windows 10, and GMT Software Development Kit (SDK) and C++ on Linux. We discuss the way to design the GMACS control software, which would not depend on the development tools.

• KIEAE Journal
• /
• v.10 no.4
• /
• pp.87-100
• /
• 2010

The energy efficient design of the multiple stock housing is very important not only to save energy but also to increase sustainability in a whole city because the multiple stock housing type is dominated in the major residential supply markets in Korea. During the early design phase of the multiple stock housing type, the architect need convenient and accurate tools for evaluating energy consumptions based on building types rapidly. Building Information Modeling(BIM) is introduced as useful tool systems providing interoperability between 3rd dimensional modeling tools and environmental engineering analysis tools, and could reduce time and cost for unnecessary modeling works in the analysis. However, it is still hard to apply to building design practice and integrated energy simulation techniques because interoperability using industrial standard file formats such as IFC and bXML is still underdeveloped. Therefore, the purpose of this study is to perform the building energy simulations, to compare the results on typical building types in multiple stock housing based on BIM, and to clear the problems using industrial standard file formats between 3rd dimensional modeling and building energy simulation software. In addition, through comparisons with simulation results according to the typical building types such as building forms, orientations, and building stories, the interrelation ship and characteristics of BIM based building energy simulation software are analysed and evaluated.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.6
• /
• pp.377-382
• /
• 2013

A convergence software development methodology based on product line engineering provides an architecture model for application development and it also provides workflow as a behavior specification of control component development to develop transaction centric application. To effect a change on software development based on product line engineering it has to be supported by a tool. But almost workflow modeling tools dose not support product line engineering concept. So we need new workflow modeling tool to support the convergence software development methodology. In this paper, we introduce a toolset for workflow modeling that consists of eclipse plug-in applications and open source tool and describe the relationships of tools through example.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.10
• /
• pp.1043-1049
• /
• 2012

The FEM analysis of machine tools is the general analysis process to evaluate machine performance in the industry for a long time. Despite advances in FEM software, because of difficult simplicity of CAD drawing, little experience of joints stiffness modeling and troublesome manual contact area divide for bindings, the industry designers think the FEM analysis is still an area of FEM analysis expert. In this paper, the automation of modeling process with simplicity of drawing, modeling of joints and contact area divide is aimed at easy FEM analysis to enlarge utilization of a virtual machine tools. In order to verify the effects of modeling automation, a slant bed type model with tilting table is analyzed. The results show FEM modeling automation method only needed 45 minutes to complete the whole modeling process, while manual modeling method requires almost one month with 8200 calculations for coordinate transformations and stiffness data input.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.450-450
• /
• 2000

This paper presents a software design simulation method for controlling multiple mechanism carrier system (MMCS), which is mainly used in a wrapping machine or a case packing machine. This method uses a mechanical tool-work interactive model proposed in this paper, in order to represent the interactive behaviors between some tools and a work driven by their tools, in which low effect states of a work are defined. Based on this method, a 3-D simulation system has been built. It consists of shape modeling of each device, behavior definitions of tools, and control logic using if-then expression. By applying it to a ase packing machine having about 30 mechanical devices and 100 inputs/outputs for control, the effectiveness of this method has been shown in general verification of control logic specification in an early software design phase and the possibility of smooth communication tool between mechanical and software designers.

• Journal of Biosystems Engineering
• /
• v.43 no.1
• /
• pp.45-58
• /
• 2018

Background: Metabolic modeling has been an essential tool in metabolic reconstruction, which has dramatically advanced in the last decades as a part of systems biology. At present, the protocol for metabolic reconstruction has been systematically established, and it provides the basis for the analysis of complex systems, which has been limited in the past. Therefore, metabolic reconstruction can be adapted to analyze agricultural systems whose metabolic data has been accumulated recently. Purpose: The aim of this review is to suggest the suitability of metabolic modeling for understanding agricultural metabolic data and to encourage the potential use of this modeling in the field of agriculture. Review: We reviewed the procedure of metabolic reconstruction using computational modeling with applicable strategies and software tools. Additionally, we presented the initial attempts of metabolic reconstruction in the field of agriculture and proposed further applications.

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.1
• /
• pp.59-65
• /
• 2007

This paper suggests a method for developing computer code that can solve inverse heat conduction problem, The concept of the object-oriented development is employed to implement the computer code in an efficient and flexible fashion. The software design is conducted based on the unified modeling language. Furthermore, this paper also explains how to implement the deliverable computer code using the existing software development tools.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.11
• /
• pp.2965-2980
• /
• 1999

There are several models and the corresponding diagrams to express software system in many kinds of viewpoints, but these are supposed to be integrated and implemented into only one system. Therefore, the software modelers should have the models ensuring the consistency between information in software development life cycle. To support the robust models for modelers using OO modeling methods, i.e. UML, and CASE tools, the meta models of the software architecture and the consistency rules between the models are suggested in this thesis. Finally, the rules are implemented in the OO CASE tool, DEBUTO(Design By UML Tool). It supports UML1.1 notations and has visual modeling editors that enable users make their own software model.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.452-459
• /
• 2015

Thanks to the development of applications, many people are using a smart phone cradle these days. But it has some problems. First of all, it is hard to fix on automobiles. Also, it is vulnerable to external vibration. Recognizing these problems, we decided to improve this device by using FreeCAD and ANSYS. Because FreeCAD is newly invented software, we used another 3D modeling software to cover shortages of tools in FreeCAD. Also, we used famous analysis software 'ANSYS' to analyze bending deformation, modal analysis, and harmonic analysis.