• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.3
• /
• pp.57-64
• /
• 2001

For the dynamic nonlinear analysis of stiffened plate and shell structures, total Lagrangian formulation is presented based upon the degenerated shell element considering finite rotation effects. Assumed strain concept is adopted in order to overcome shear locking phenomena and to eliminate spurious zero energy mode. In the elasto-plastic analysis, the return mapping algorithm based on the consistent elasto-plastic tangent modulus is applied to collapse analysis of shell structures. Newmark integration method is used for dynamic nonlinear analysis of shell structures under dynamic forces.

• ETRI Journal
• /
• v.18 no.3
• /
• pp.161-170
• /
• 1996

We show that the electrically coupled Hindmarsh-Rose neuronal model exhibits various patterns of phase locking at fixed parameter value. Through the analysis of the effective coupling, the system is shown to be stabilized in one of these patterns according to the initial conditions. This corresponds to the parameter-tuning independent mode-switching mechanism that changes the electrical output of neuronal systems. It is also presented how the stable fixed points of the effective coupling which characterize the phase locking patterns depend on the external current.

• Structural Engineering and Mechanics
• /
• v.8 no.6
• /
• pp.591-605
• /
• 1999

An accurate and efficient shell element is presented. The stiffness of the shell element is decomposed into two parts with one part corresponding to stretching and bending deformation and the other part corresponding to shear deformation of the shell. Both parts of the stiffness are calculated with reduced integration rules, thereby improving computational efficiency. Shear strains are averaged on the reference surface such that neither locking phenomena nor any zero energy mode can occur. The satisfactory behaviour of the element is demonstrated in several numerical examples.

• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.573-578
• /
• 2023

This paper introduces a new locking technique applicable to high-performance digital Phase-Locked Loops (DPLL). The study employs additional thermometer codes to reduce quantization errors in LC-based Digital Controlled Oscillators (DCO). Despite not implementing the entire DCO codes in thermometer mode, this method effectively reduces quantization errors through enhanced linearity. In the initial locking phase, binary codes are used, and upon completion of locking, the system transitions to thermometer codes, achieving high frequency linearity and reduced jitter characteristics. This approach significantly reduces the number of switches required and minimizes the oscillator's area, especially in applications requiring low DCO gain (Kdco), compared to the traditional method that uses only thermometer codes. Furthermore, the jitter performance is maintained at a level equivalent to that of the thermometer-only approach. The efficacy of this technique has been validated through modeling and design at the RTL level using SystemVerilog and Verilog HDL.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.5
• /
• pp.563-569
• /
• 2014

This article focuses on a hemispherical resonator gyro driven by the Coriolis effect. A hemispherical shell, called a resonator, is maintained in the resonance state by amplitude control and phase locking control. Parametric excitation has been used to control the amplitude. For rate measurement mode or FTR mode, nodal points have been kept to an amplitude of zero. Angular rate measurement has been demonstrated by rotating a resonator. Frequency mismatch between two stiffness principal axes is a major cause of low performance: vibrating pattern drift and reduced control effectiveness. This mismatch has been reduced significantly by the addition of small mass. A negative spring effect, which lowers resonance frequencies, has been verified experimentally.

• Journal of IKEEE
• /
• v.9 no.2 s.17
• /
• pp.115-122
• /
• 2005

We report 400 femto-second highly stable, nearly transform-limited, pulse generation at 10 GHz in $1540{\sim}1550$ nm wavelength region by adiabatic soliton pulse compression of an actively mode-locked fiber ring laser output. Without using any supermode selection device, supermode beating noise has been suppressed below -123 dB/Hz, resulting less than 100 femto-second timing jitters at the noise band of $1\;kHz{\sim}100\;MHz$.

• Korean Journal of Optics and Photonics
• /
• v.7 no.3
• /
• pp.251-259
• /
• 1996

Two-Photon Fluorescence (TPF) experiment measures temporal width of an amplified short laser pulse which has passed through a four-pass Nd: glass amplifier, after selecting a single pulse from pulse train Q-switched and mode-locked(QSML) in Nd:YLF master oscillator. Determination of pulsewidth and pulseshape was also made with detection of autocorrelation trace of CW mode-locked pulse train by using noncollinear type I Second Harmonic Generation (SHG) method. The observed TPF track showed various patterns, depending on pulse-selecting position in QSML pulse train. That is, autocorrelation of a pulse extracted at front of the train displayed smooth pulse shape, while one from the trailing part of the train created many sharp spikes and substructure in the pulse. By TPF method, pulsewidth was measured to be 44.4 ps with contrast ratio of 2.86 which enabled us to find out energy fraction of a pulse to total energy, (sum of pulse and background); we obtain the value of 0.62. Pulsewidth of 46.6ps was also acquired in another SHG experiment with the help of only mode-locked pulse train. On the other hand, we confirmed that shape of the pulse is close to $sech^2$ one as a result of fitting the SHG autocorrelation signal with various functions. With simulation using this $sech^2$ type of pulse, pulsewidth reduction of the beam, having passed through four-pass amplifier, was also verified.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.675-676
• /
• 2012

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.34-35
• /
• 2003

펨토초 레이저의 개발은 커렌즈 모드록킹 (Kerr-lens mode-locking； KLM) 기술이 티타늄사파이어 이득매질에 적용되면서 1990년대에 들어 급격하게 이루어졌다. 구조가 간단하면서 안정적인 KLM 티타늄사파이어 레이저는 현재 펨토초 레이저 광원의 표준을 이루고 있으며, 처프펄스 증폭 (chirped-pulse amplification； CPA) 방식을 이용하여 소규모의 테라와트급 고출력 펨토초 레이저 제작에도 이용되고 있다. 특히, 1990년대 말에는 CPA 증폭단을 갖춘 KLM 티타늄사파이어 레이저가 상용화되면서 물리, 화학과 같은 기초 분야에서뿐만 아니라 의료용, 산업용으로도 활용이 확대되고 있다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.40-41
• /
• 2003

(self-focusing)을 이용한 커렌즈 모드록킹(Kerr-lens mode-locking； KLM) 방법을 이용하면 간단한 구조를 갖는 공진기로 100 펨토초(femto=10-13) 미만의 레이저 펄스를 생성할 수 있다. KLM 티타늄사파이어(Ti：sapphire) 레이저의 발달로 10 펨토초 영역의 레이저 펄스를 간단하게 생성할 수 있게 되었으며 특히, 넓은 스펙트럼 폭을 가지는 처프거울(chirped mirror)의 사용과 정확한 분산의 보정을 통한 5 펨토초(800 nm 파장의 두 주기에 해당) 영역의 레이저 펄스 생성도 보고되고 있다.