• 한국전기전자재료학회논문지
• /
• 제26권6호
• /
• pp.434-440
• /
• 2013

With polymer properties and ceramic volume fraction as design variables, the optimal structure of 1-3 piezocomposites has been determined to maximize the thickness mode electromechanical coupling factor. When the piezocomposite vibrates in a thickness mode, inter-pillar resonant modes are likely to occur between lattice-structured piezoceramic pillars and polymer matrix, which significantly deteriorates the performance of the piezocomposite. In this work, a new method to design the structure of the 1-3 type piezocomposite is proposed to maximize the thickness mode electromechanical coupling factor while preventing the occurrence of the inter-pillar modes. Genetic algorithm was used for the optimal design, and the finite element analysis method was used for the analysis of the inter-pillar mode.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.223-224
• /
• 2006

This paper present a new disk-type piezoelectric transformer. The input side of the transformer has a crescent-shaped electrode and the output side has a focused poling direction. This transformer has multi-layered structure. The piezoelectric transformers operated m each transformer's resonance vibration mode. The electrodes and poling directions on commercialy available piezoelectric ceramic disks were designed so that the planar or shear mode coupling factor ($k_p,\;k_{15}$) becomes effective rather than the transverse mode coupling factor ($k_{31}$). The Resonance frequency is 65.22[kHz] and maximum voltage step-up ratio is 149. Multi-layered transformer has better efficiency and step-up ratio than the single-layered transformer.

• 한국전자파학회논문지
• /
• 제14권10호
• /
• pp.1052-1059
• /
• 2003

본 논문에서는 이중충 마이크로스트립 유전체 기판을 이용하여 결합도와 격리도를 개선한 방향성 결합기를 제안하고, 설계방법을 제시하였다. 제안된 구조는 re-entrant mode 방향성 결합기의 구조를 수정하여, 결합도를 향상시키기 위해 최하층의 접지면에 어퍼쳐를 적용시킨 형태이다. 또한, 부동도체에 슬릿을 적용함으로써 격리도, S$_{11}$에 대한 정재파비, 그리고 위상차 등에 서도 우수한 특성을 얻을 수 있었다. 그 결과, 제안된 re-entrant mode 방향성 결합기는 기존의 구조보다 약 1.5 dB 정도 높은 결합도를 가질 뿐 아니라 각각 20 dB 이상의 개선된 격리도와 S$_{11}$에 대한 정재파비를 가짐을 확인할 수 있었다. 또한 위상 특성에서도 우수한 특성을 가지므로, 이로부터 제안된 결합기는 강한 결합이 필요한 다단 결합기에 사용될 수 있을 것이다.

• 한국정보전자통신기술학회논문지
• /
• 제9권6호
• /
• pp.630-636
• /
• 2016

In this paper, a novel triple-mode cavity structure, designed for compactness and operating at 850 MHz, is analyzed. A cylindrical dielectric resonator is loaded into a metallic cylindrical cavity. Previous study has been focused on the analysis of the cylindrical dielectric resonator, but in this paper, the effect of the cylindrical metallic cavity has been analyzed. Enclosing the dielectric resonator inside the metallic cavity increases the resonant frequency of the dielectric resonator; however, this increases the quality factor and introduces the possibility of installing coupling screws. The principle of generation of triple-mode was investigated by parametric analysis. The generated triple-mode is TE011 mode and two orthogonally generated HEM121 modes. By adjusting the radius of the dielectric resonator, the height of the dielectric resonator, or the radius of the cylindrical metallic cavity, three modes could be coincided. However, the height of the metallic cavity keeps three modes separated. The mode characteristics of the proposed cavity are analyzed using a full-wave electromagnetic (EM) simulation. The proposed triple-mode cavity could be developed to triple-mode filter using a coupling screw, and the commercial application for the miniaturized filter below 1 GHz could be expected.

• 한국전자통신학회논문지
• /
• 제12권4호
• /
• pp.561-568
• /
• 2017

저밀도 파장분할다중화 기술을 광 집적 소자에 효율적으로 활용하기 위하여 광섬유와 평면기판 내 광 도파로 사이의 파장 선택적 광 결합기 구조가 효율적인 수단으로 고려될 수 있다. 본 논문에서는 공기 도랑 격자를 지닌 실리콘 도파로와 단일 모드 광섬유 간 결합을 고려하였다. 격자의 깊이에 따른 결합 효율의 경향성과 그 한계점을 조사하였다. 이를 위해 결합 모드 이론에 기반을 둔 모델링을 통하여 설계된 결합기 구조의 결합효율을 예측하고, 유한요소법을 이용한 시뮬레이션 결과와 정량적으로 비교 분석 하였다.

• Journal of electromagnetic engineering and science
• /
• 제4권3호
• /
• pp.102-106
• /
• 2004

A novel Genetic Algorithm(GA)-based method is suggested to transform a coupling matrix to another, without the procedure of Matrix Rotation. This can remove tedious work like pivoting and deciding rotation angles needed for each of the iterations. The error function for the GA is simply formed and used as part of error minimization for obtaining the solution. An 8th order dual-mode elliptic integral function response filter is taken as an example to validate the present method.

• 전자공학회논문지A
• /
• 제30A권2호
• /
• pp.10-15
• /
• 1993

The cylindrical TEM mode solution for electromagnetic coupling to an angled two-wire transmission line is corrected by imposing some physical constraints additionally. The validity of the correction process is assured by showing that the corrected solution approaches the numerical result for the equivalent model of cascaded piecewise uniform sections.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1964-1965
• /
• 2002

This paper reports on the single mode fiber coupling efficiency. There is difference between simulation by CODE-V and theoretical result, we observed CEO which is taken by experiment in lab and found out that CEO taken by CODE-V was closer to real experiment result then theoretical result.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권5호
• /
• pp.309-317
• /
• 2004

This paper suggested the vibration characteristic improvement by variation mode of ring type ultrasonic motor. Design for the piezoelectric ceramic and elastic body of stator were calculated by the finite element method(FEM) that consider the resonance frequency, vibration mode and coupling efficiency etc. Through the result of vibration analysis from 6 order mode to 8 mode, the 7 order mode was gained very an excellent results that it was the coupling efficient, minimum power loss and bending vibration value. Here over 7 order mode, this paper was acquired that an output current for input voltage was very a large increased results. The result of vibration calculation, from thickness 0.5[mm] to 2[mm], knew the fact that the vibration displacement at 0.5[mm] is an high value too. From such result, this paper was manufactured the ultrasonic motor of outer diameter 5O[mm] , inter 22[mm] having the about 43.86[KHz] resonance frequency. We have gated that a simulation result is 42.2[KHz] and an experiment result is 43.86[KHzl The propriety of this paper was established though comparison. investigation of simulation and experiment result.

• Journal of Astronomy and Space Sciences
• /
• 제26권3호
• /
• pp.287-294
• /
• 2009

In helioseismology it is normally assumed that p-mode oscillations are excited in a statistically independent fashion. Unfortunately, however, this issue is not clearly settled down in that two experiments exist, which apparently look in discrepancy. That is, Appourchaux et al. (2000) looked at bin-to-bin correlation and found no evidence that the assumption is invalid. On the other hand, Roth (2001) reported that p-mode pairs with nearby frequencies tend to be anti-correlated, possibly by a mode-coupling effect. This work is motivated by an idea that one may test if there exists an excess of anticorrelated power variations of pairs of solar p-modes. We have analyzed a 72-day MDI spherical-harmonic time series to examine temporal variations of p-mode power and their correlation. The power variation is computed by a running-window method after the previous study by Roth (2001), and then distribution function of power correlation between mode pairs is produced. We have confirmed Roth's result that there is an excess of anti-correlated p-mode pairs with nearby frequencies. On the other hand, the amount of excess was somewhat smaller than the previous study. Moreover, the distribution function does not exhibit significant change when we paired modes with non-nearby frequencies, implying that the excess is not due to mode coupling. We conclude that the origin of this excess of anticorrelations may not be a solar physical process, by pointing out the possibility of statistical bias playing the central role in producing the excess.