• 제목/요약/키워드: Mode transition

검색결과 489건 처리시간 0.026초

Transition Metal-Catalyzed and -Promoted Reactions via Carbene and Vinylidene Complexes Generated from Alkynes

  • Ohe, Kouichi
    • Bulletin of the Korean Chemical Society
    • /
    • 제28권12호
    • /
    • pp.2153-2161
    • /
    • 2007
  • The transition metal-induced in situ generation of carbene complexes from alkynes having a carbonyl or imino group as a nucleophilic functionality has been investigated. These reactive carbenoid species are generated with high atom efficiency through a 6-endo-dig cyclization mode based on the electrocyclization of vinylidene complexes or a 5-exo-dig cyclization mode in π-alkyne complexes, and have been found to serve as versatile intermediates in catalytic carbene transfer reactions. Highlighted and reviewed in this account are the generation and preparation of pyranylidene, furylcarbene, pyrrolylcarbene, and vinylcarbene complexes and their application to [3,3]sigmatropic rearrangement of acylcyclopropylvinylidenes, catalytic cyclopropanation reactions, [2,3]sigmatropic rearrangement or condensation reactions via ylides, ring-opening and substitution reactions with heteroaromatic compounds, and catalytic isomerization of oligoynes.

The Characteristics of Magnetic Oscillations in L-H Transition and Disruption in JFT-2M Tokamak

  • Oh, Byung-Hoon;Lee, Kwang-Won;Kim, Sung-Kyu
    • 한국원자력학회:학술대회논문집
    • /
    • 한국원자력학회 1996년도 춘계학술발표회논문집(4)
    • /
    • pp.432-437
    • /
    • 1996
  • The observed characteristics of magnetic oscillations in L-H transition and disruption are described. Two kinds of MHD magnetic probes are used in order to cover broadband frequency range from 1.3 kHz to 300 kHz in the H-mode. Depending on the probe's position and frequency, different characteristics are observed. Precursor like oscillation in L-H transition, and the difference between sawtooth and ELM are discussed. All disruptions during the current rising phase are related with m=2 or m=3 mode. Different disruption characteristics for different operation conditions could be found in the MHD probes.

  • PDF

영구자석동기전동기의 부하추정을 통한 센서리스 전환 알고리즘 (Sensorless Transition Algorithm of PM Synchronous Motor by Load Torque Estimation)

  • 김동현;조관열;김학원
    • 전력전자학회논문지
    • /
    • 제26권5호
    • /
    • pp.349-356
    • /
    • 2021
  • Permanent magnet synchronous motors are mainly used in the traction of electric vehicle and home application products including air-conditioners and refrigerators. For sensorless control without rotor position sensors, I-F control is applied for initial starting at low speeds, and mode is changed to sensorless control when the rotor speed is sufficiently accelerated for estimating rotor position. When the mode is changed to the sensorless control from the open-loop starting, the initial integral value of the speed controller should be considered by load condition; otherwise, the transition to sensorless control may fail. The sensorless transfer algorithm of PM synchronous motor based on load condition for smooth transition is proposed. The performance of the proposed sensorless transfer algorithm was verified by experiments.

관 유동과 Blasius 유동에서 가장 불안정한 교란에 관하여 (On the Most Unstable Disturbance of Channel Flows and Blasius Flow)

  • 최상규;정명균
    • 대한기계학회논문집B
    • /
    • 제27권6호
    • /
    • pp.766-772
    • /
    • 2003
  • The pseudospectral method for stability analysis was used to find the most influential disturbance mode for transition of plane channel flows and Blasius flow at their critical Reynolds numbers. A number of various oblique disturbance waves were investigated for their pseudospectra and resolvent norm contours in each flow, and an exhaustive search method was employed to find the disturbing waves to which the flows become most unstable. In plane Poiseuille flow an oblique disturbance with a wavelength of 3.59h (where h is the half channel width) at an angle $28.7^{\circ}$ was found to be the most influential for the flow transition to turbulence, and in plane Couette flow it is an oblique wave with a wavelength of 3.49h at an angle of $19.4^{\circ}$. But in Blasius flow it was found that the most influential mode is a normal wave with a wavelength of $3.44{\delta}_{999}$. These results imply that the most influential disturbance mode is closely related to the fundamental acoustic wave with a certain shear sheltering in the respective flow geometry.

Synthetic jet을 이용한 스마트 무인기 익형 주위의 유동 제어 (FLOW CONTROL OF SMART UAV AIRFOIL USING SYNTHETIC JET)

  • 김민희;김상훈;김우례;김종암;김유신
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2009년 춘계학술대회논문집
    • /
    • pp.43-50
    • /
    • 2009
  • In order to reduce the download around Smart UAV(SUAV) at hovering and transition mode, flow control using synthetic jet has been performed. Many of the complex tilt rotor flow features are captured including wing leading and trailing edge separation, and the large region of separated flow beneath the wing. First, in order to control the trailing edge separation, synthetic jet is located at 30, 95% of flap chord length. The flow control using synthetic jet on flap shows that stall characteristics depending on several mode can be improved through separation vortices resizing. Also, a flap jet and a 0.01c jet which control the separation efficiently are applied at the same time at each test case because controlling the leading edge separation is essential for download reduction. As a result, time averaged download is reduced about 18% comparing with no control case at hovering mode and 48% at transition mode. These research results show that if flow control using leading edge jet and trailing edge jet is used effectively to the SUAV in overall flight mode, flight performance and stability can be improved.

  • PDF

개선된 전파형 ZVT PWM DC-DC 컨버터 (Improved Full Wave Mode ZVT PWM DC-DC Converters)

  • 김태우;김학성
    • 전력전자학회논문지
    • /
    • 제9권1호
    • /
    • pp.10-16
    • /
    • 2004
  • 본 논문에서는 공진 에너지 회생율을 최대화하여 전체적인 효율을 증가시킨 개선된 전파형 ZVT(Zero-Voltage-Transition) PWM(Pulse-Width-Modulation) DC-DC 컨버터를 소개한다. 개선된 회로는 단지 기존 컨버터의 보조스위치와 공진형 인덕터 사이에 직렬로 역공진 저지 다이오드를 추가로 달아서 모든 스위칭 소자들이 소프트 스위칭 조건에서 턴온/턴오프하여 스위칭 손실을 최소화하고, 공진 에너지를 완전히 입력으로 회귀시켜 전도손실을 절감하여 효율의 증감을 이루었다. 본 논문에서는 부스터 컨버터를 이용하여 개선된 컨버터의 동작을 분석하고, 실험결과를 바탕으로 제안된 회로의 타당성을 입증하였다.

분산 발전 시스템에서 계통연계 인버터의 매끄러운 모드 전환 (Grid Connected Inverter of ESS for Seamless mode Transition)

  • 홍창표;김학원;조관열
    • 전력전자학회논문지
    • /
    • 제21권4호
    • /
    • pp.364-372
    • /
    • 2016
  • In this paper, a voltage controller for the seamless transition of a grid-connected inverter for ESS is proposed. The single-phase inverter is operated as a current controller when the grid is connected and as a voltage controller in the stand-alone mode when the grid is disconnected. Generally, in the case of grid recovery, the overcurrent may flow into the system because of the mismatch phase between the inverter output and grid voltages. The proposed controller resolves the overcurrent problem through phase delay problems with initial value feed-forward control of the integrator when the grid voltage is restored. The effects of the control method are simulated through PSIM, and the usefulness of the control method is verified through experiments.

AFM 가공 모드 분석 및 AE 모니터링 (Characterization of AFM machining mode and Acoustic Emission monitoring)

  • 안병운;이성환
    • 한국정밀공학회지
    • /
    • 제25권10호
    • /
    • pp.41-47
    • /
    • 2008
  • This study aims to obtain machining characteristics during AFM (Atomic force Microscope) machining of silicon wafers and to monitor the machining states using acoustic emission. As in micro scale machining, two distinct regimes of deformation, i. e. ploughing regime and cutting regime were observed. First, the transition between the two regimes are investigated by analyzing the "pile-up" during machining. As far as in process monitoring is concerned, in the ploughing repime, no chips have been formed and related AE RMS values are relatively low, In the mean time, in the cutting regime, the RMS values are significantly higher than the ploughing regime, with apparent chip formation. From the results, we found out that the proposed scheme can be used for the monitoring of nanomachining, especially for the characterization of nanocutting mode transition.

Ar 가스 압력과 RF 전력변화에 따른 유도결합형ㆍ플라즈마 E-H모드 변환의 광학적 특성 (Optical E-H Transition Properties of Inductively Coupled Plasma with Ar Gas Pressure and RF Pourer)

  • 허인성;조주웅;이영환;김광수;최용성;박대희
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제53권1호
    • /
    • pp.20-23
    • /
    • 2004
  • In this paper, the emission properties of electrodeless fluorescent lamp were discussed using the inductively coupled plasma. To transmit the electromagnetic energy into the chamber, a RF power of 13.56 [MHz] was applied to the antenna and considering the Ar gas pressure and the RF electric power change, the emission spectrum, Ar I line, luminance were investigated. At this time, the input parameter for ICP RF plasma, Ar gas pressure and RF power were applied in the range of 10∼60 [mTorr], 10∼300 [W], respectively. From emission intensity and lumnance intensity results, the mode transition from E-mode to H-mode was observed. This implies that this method can be used to find an optimal RF power for efficient light illumination in an electrodeless fluorescent lamp.

Design of Adaptive Fuzzy IMM Algorithm for Tracking the Maneuvering Target with Time-varying Measurement Noise

  • Kim, Hyun-Sik;Kim, In-Ho
    • International Journal of Control, Automation, and Systems
    • /
    • 제5권3호
    • /
    • pp.307-316
    • /
    • 2007
  • In real system application, the interacting multiple model (IMM) based algorithm operates with the following problems: it requires less computing resources as well as a good performance with respect to the various target maneuvering, it requires a robust performance with respect to the time-varying measurement noise, and further, it requires an easy design procedure in terms of its structures and parameters. To solve these problems, an adaptive fuzzy interacting multiple model (AFIMM) algorithm, which is based on the basis sub-models defined by considering the maneuvering property and the time-varying mode transition probabilities designed by using the mode probabilities as the inputs of the fuzzy decision maker whose widths are adjusted, is proposed. To verify the performance of the proposed algorithm, a radar target tracking is performed. Simulation results show that the proposed AFIMM algorithm solves all problems in the real system application of the IMM based algorithm.