• 한국구조물진단유지관리공학회 논문집
• /
• 제13권3호통권55호
• /
• pp.101-109
• /
• 2009

FBG센서로 변형율을 계측하고 추정 가능한 일부 저차모드를 중첩하여 교량의 동적변위를 추정하는 알고리즘을 제안하였다. 모드별 진동형상은 단순보의 이론식에서 유도하였고, 일반화좌표는 FBG센서에서 계측한 변형율에서 유도하였다. 일반 교량의 저차모드에서 발생하는 휨 및 비틀림모드는 각 거더별 혹은 구간별로 분리하여 단순보의 이론적 휨모드로 고려함으로써 다양한 형식의 교량에 적용할 수 있도록 하였다. 알고리즘의 적용에 고려해야 할 진동모드의 개수 및 변형율 센서의 개수를 결정하는 기준은 이론적으로 제시되었다. 제안된 방법의 효용성을 다양한 형식의 교량에 대한 수치예제, 모형교량에 대한 실내실험 및 자기부상열차용 PC Box 거더교에 대한 현장실험을 통해 검증하였다. 수치예제에서는 교량 진동형상의 오차 및 변형률 측정 오차가 동적변위 추정 결과에 미치는 영향을 분석하였다.

• Structural Engineering and Mechanics
• /
• 제14권4호
• /
• pp.491-504
• /
• 2002

A state-space method is proposed to analyze the aerodynamically coupled flutter problems of long-span bridges based on the modal coordinates of structure. The theory about complex modes is applied in this paper. The general governing equation of the system is converted into a complex standard characteristic equation in a state space format, which contains only two variables. The proposed method is a single-parameter searching method about reduced velocity, and it need not choose the participating modes beforehand and has no requirement for the form of structure damping matrix. The information about variations of system characteristics with reduced velocity and wind velocity can be provided. The method is able to find automatically the lowest critical flutter velocity and give relative amplitudes, phases and energy ratios of the participating modes in the flutter motion. Moreover, the flutter analysis of Jiangyin Yangtse suspension bridge with 1385 m main span is performed. The proposed method has proved reliable in its methodology and efficient in its use.

• 대한기계학회논문집A
• /
• 제29권12권
• /
• pp.1586-1596
• /
• 2005

In this paper, a structural damage identification method (SDIM) is developed to identify the line crack-like directional damages generated within a cylindrical shell. First, the equations of motion for a damaged cylindrical shell are derived. Based on a theory of continuum damage mechanics, a small material volume containing a directional damage is represented by the effective orthotropic elastic stiffness, which is dependent of the size and the orientation of the damage with respect to the global coordinates. The present SDIM is then derived from the frequency response function (FRF) directly solved from the equations of motion of a damaged shell. In contrast with most existing SDIMs which require the modal parameters measured in both intact and damaged states, the present SDIM may require only the FRF-data measured at damaged state. By virtue of utilizing FRF-data, one may choose as many sets of excitation frequency and FRF measurement point as needed to acquire a sufficient number of equations for damage identification analysis. The numerically simulated damage identification tests are conducted to study the feasibility of the present SDIM.

• 한국소음진동공학회논문집
• /
• 제13권11호
• /
• pp.882-889
• /
• 2003

This paper presents the method for structure borne noise analysis of a flexible body in multibody system. The proposed method is the superposition method using the flexible multibody dynamic analysis and the finite element one. This method is executed in 3 steps. In the 1st step, time dependent quantities such as dynamic loads, modal coordinates and gross body motion of the flexible body are calculated through a flexible multibody dynamic analysis. And frequency response functions of those time dependent quantities are computed through Fourier transforms. In the 2nd step, acoustic pressure coefficients are obtained through structure-acoustic coupling analyses by the finite element method. In the final step, frequency responses of acoustic pressure at the acoustic nodes are recovered through linear superposition of frequency response functions with acoustic pressure coefficients. The accuracy of the proposed method is verified in the numerical example of a simple car model.

• 한국의학물리학회지:의학물리
• /
• 제15권2호
• /
• pp.70-76
• /
• 2004

간 영역을 다른 복부 장기들로부터 정확히 분할한 후 간 내부의 종양을 감별 분할하므로써 간암을 조기 발견하는 데 도움을 준다. 본 논문은 복부의 모포러지컬 특성을 이용하여 효과적인 완전 자동 간 분할을 수행할 수 있는 알고리즘을 제안한다. 전처리 단계로서 다봉성 히스토그램 분할을 수행하고 복부의 모폴러지 좌표를 찾기 위해 척추를 분할한다. 다음으로 간 영역을 C-class maximum a posteriori (MAP) decision과 이진 모폴러지 필터링에 의해 추출한다. 자동으로 분할된 간 영역을 평가하기 위해 영역 에러율(Average Error Rate)과 회전 이진 영역 투영 매칭법(Rotational Binary Region Projection Matching; RBRPM)에 의한 상관 계수를 사용한다. 실험 결과는 제안한 알고리즘에 의해 획득한 완전 자동 간 분할과 수동 간 분할사이에 매우 유사한 결과를 보였다.

• 한국자동차공학회논문집
• /
• 제6권1호
• /
• pp.163-181
• /
• 1998

In this study, the objective is determine the optimal design variable of engine mount system using the rubber mount of bush-type which is usually utilized in passive control to minimize vibrations of vehicle body or transmission from engine into body. The engine model adopted in this study is 4-cylinder, 4-stroke gasoline engine support- ed by 4-points. The system is modelled in 10 d.o.f.-rigid body motion of the engine & transmission in 6 d.o.f., elastic motion of vehicle body in 4 d.o.f.(1st torsional, 1st vertical and 1st & 2nd lateral bending vibration mode). To consider the elastic motion of vehicle body, find the eigenvalues and mode shapes of vehicle body by nodal testing and then determine the modal masses and stiffnesses of the body. The design variables of the engine mount system are locations, stiffness and damping coefficients of the rubber mounts(28 design variables). In case of considering the torque-roll axis for the engine, the design variables of the mount system are reduced to 22 design variables. The objective functions in optimal design process are considered by three cases, that is, 1) transmitted forces through engine mounts, 2) acceleration components of generalized coordinates for the vibration of vehicle body, 3) acceleration of specified location(where gear box) of body. three case are analyzed and compared with each other.

• 한국정밀공학회지
• /
• 제19권1호
• /
• pp.119-126
• /
• 2002

In this paper, we present a new approach based on an elitist genetic algorithm for the task of aligning the position of a robot gripper using CCD cameras. The vision-based control scheme for the task of aligning the gripper with the desired position is implemented by image information. The relationship between the camera space location and the robot joint coordinates is estimated using a camera-space parameter modal that generalizes known manipulator kinematics to accommodate unknown relative camera position and orientation. To find the joint angles of a robot manipulator for reaching the target position in the image space, we apply an elitist genetic algorithm instead of a nonlinear least square error method. Since GA employs parallel search, it has good performance in solving optimization problems. In order to improve convergence speed, the real coding method and geometry constraint conditions are used. Experiments are carried out to exhibit the effectiveness of vision-based control using an elitist genetic algorithm with a real coding method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.394-399
• /
• 2005

In this paper, a structural damage identification method (SDIM) is developed to identify the line crack-like directional damages generated within a cylindrical shell. First, the equations of motion fur a damaged cylindrical shell are derived. Based on a theory of continuum damage mechanics, a small material volume containing a directional damage is represented by the effective orthotropic elastic stiffness, which is dependent of the size and the orientation of the damage with respect to the global coordinates. The present SDIM is then derived from the frequency response function (FRF) directly solved from the dynamic equations of the damaged cylindrical shell. In contrast with most existing SDIMs which require the modal parameters measured in both intact and damaged states, the present SDIM requires only the FRF-data measured in damaged state. By virtue of utilizing FRF-data, one may choose as many sets of excitation frequency and FRF measurement point as needed to acquire a sufficient number of equations fer damage identification analysis. The numerically simulated damage identification tests are conducted to study the feasibility of the present SDIM.

• 한국항공우주학회지
• /
• 제31권6호
• /
• pp.36-44
• /
• 2003

본 논문에서는 선회모드와 구조모드를 가지는 복합좌표계 시스템의 선회동역학을 시간유한요소법을 이용하여 전개할 때에 발생하는 수치적 문제점을 극복할 수 있는 해석적 해법을 제안하였다. 시간유한요소법을 이용한 복합좌표계 시스템의 동역학은 선회모드와 구조모드가 서로 연성된 두 개의 행렬미분방정식으로 전개될 수 있음을 보였다. 공간전파관계식을 시간영역 모드좌표계로 변환하고, 각 시간모드에 대한 해석적 공간전파관계식을 유도하였다. 경계조건의 적용을 통해 선회각에 대한 해석적 관계식을 구하였으며, 이를 이용함으로써 각 모드에 대한 공간 특성치를 구하였다. 수치 예제를 통하여 기존의 상태천이행렬을 이용한 해법과 비교함으로써 제안된 해석적 해법을 타당성을 검증하였다.

• 대한토목학회논문집
• /
• 제28권1A호
• /
• pp.95-104
• /
• 2008

본 연구에서는 경부고속철도상의 대표적인 교량인 2경간 연속보 형태의 고속철도 교량에 대하여 동적거동을 해석하고 공진발생의 감소방안들을 제시하였다. 하중은 한국형 고속철도하중인 총길이 380.15 m의 TGV-K 열차(2P+18T)가 일정한 속도로 이동하는 것으로 하였다. 동적거동을 모사하는 지배방정식은 질량과 강성이 분포된 연속계에서 만들어진 편미분방정식을 이용하여 구하였으며 Duhamel 적분을 이용한 모달계수의 처리를 수반하는 모드중첩법을 이용하여 동적해석을 수행하였다. 열차의 주행속도에 관계없이 동적거동을 급격히 감소시킬 수 있는 지간장이 존재하였으며 지금까지 연구된 단순보 형태의 교량에서 분석된 결과와는 달랐다. 열차의 주행속도에 의존하여 동적응답이 급격히 증가되어 공진현상을 일으키는 경우에도 공진을 감소시킬 수 있는 여러 방안들을 제시하였다.