• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2A
• /
• pp.196-201
• /
• 2010

Measurement of Quality of Service (QoS) parameters and its statistical analysis becomes a key issue for Mobile WiMAX service providers to manage the converged network efficiently and to support end-to-end QoS. In this paper, we investigate the population distribution of end-to-end one-way delay which is the most important QoS parameter in Mobile WiMAX networks. The samples are analyzed with Chi-Square Goodness-of-Fit test, Kolmogorov-Smirnov (K-S), and Anderson-Darling (A-D) test to verify the distribution of parent population. The relation with confidence level and the minimum number of sample size is also performed for logistic distribution. The statistical analysis is a promising approach for measuring the performance Mobile WiMAX networks.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.454-458
• /
• 2008

This article describes an interference reduction scheme for Mobile WiMAX in an indoor environment. The feasibility of user deployed femtocells in the same frequency channel as an existing macro cell network is investigated. One of the important requirements for co-channel operation of femtocells such as auto-configuration and self optimization are discussed. In femtocell deployments, leakage of the pilot signal to the outside of a house can result of the higher number of mobility events caused by passing user of macrocell. This interference effect can be minimized by reducing the pilot power using proper scheme. This paper introduces existing auto-configuration method of power control and proposed interference reduction scheme using power control for Mobile WiMAX in an indoor environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.2
• /
• pp.382-389
• /
• 2009

As the use of mobile device is popularized, the needs of variable services of WiMAX technique and the importance of security is increasing. There is a problem that can be easily attacked from a malicious attack because the action is achieved connectionlessly between neighbor link establishing procedure and TEK exchange procedure in mobile WiMAX even though typical 1 hop network security technique is adapted to WiMAX for satisfying these security requirement. In this paper, security connected mechanism which safely connects neighbor link establishing procedure of WiMAX and TEK exchange procedure additional to the basic function provided by IEEE 802.16e standard to satisfy security requirement of mobile WiMAX is proposed. The proposed mechanism strengthens the function of security about SS and BS by application random number and private value which generated by SS and BS to public key of neighbor link establishing procedure and TEK exchange procedure. Also, we can prevent from inside attack like man-in-the-middle which can occur in the request of TEK through cryptographic connection of neighbor link establishing procedure and TEK exchange procedure.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.4
• /
• pp.820-822
• /
• 2010

Mobile WiMAX system provides various classes of traffic such as real-time and non-realtime services. These services have different QoS requirements and the QoS aware scheduling has been an important issue. Although many of scheduling algorithms for various services in OFDMA system have been proposed, it is needed to be modified to be applied to Mobile WiMAX system. Since Mobile WiMAX supports five kinds of service classes, it is important to take QoS characteristics of each class into consideration. In this paper, we propose an efficient packet scheduling algorithm to support QoS of each class. Proposed scheme selects a service class first considering QoS Characteristics of each class and choose an appropriate user in the selected class. Simulation results show that the proposed algorithm has better performance than the other algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11A
• /
• pp.844-851
• /
• 2009

Handover is needed in multi-hop relay systems to support mobility. The main purpose of handover is to provide the continuous connection when a MS migrates from the air-interface of one BS to another air-interface provided by another BS. Especially the handover between different systems is essential to next generation network. Vertical Handover technology in Mobile WiMAX MMR system is very useful for operators to introduce to Mobile WiMAX system in an overlaid cell environment. This technology will be applied to technology which hands MRS(Mobile Relay Station) over to different systems for system performance enhancement in Ubiquitous environment overlaid between Micro ce11(Frequency 1,FA1) and Macro cell(Frequency 2,FA2). In this paper, FA1 and FA2 are used in order to perform Vertical Handover of MRS(Mobile Relay Station) according to suggested conditions. interferences from neighboring BS or other sectors of 6 macro cells surrounding center Macro cell are analyzed and throughputs are measured according to suggested conditions.

• The KIPS Transactions:PartC
• /
• v.17C no.3
• /
• pp.299-306
• /
• 2010

IPTV and VoIP services are considered as killer applications over Mobile WiMAX network, which provideshigh mobility and data rate. Among those which affect the quality of voice in those services, the jitter buffer or playout buffer can compensate the poor voice quality caused by the packet drop due to frequent route change or differences among routes between service endpoints. In this paper, we analyze the correlation between the sleep interval length and jitter buffer size in order to guarantee a predefined level of voice quality. For this purpose, we present an end-to-end delay model considering additional delay incurred by the WiMAX PSC-II sleep mode and a VoIP service quality requirement based on the delay constraints. Through extensive simulation experiments, we also show that the increase of jitter buffer size may degrade the voice quality since it can introduce additional packet drop in the jitter buffer under WiMAX power saving mode.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5A
• /
• pp.341-346
• /
• 2009

M-WiMAX (Mobile-Worldwide Interoperability for Microwave Access) system, which uses OFDM (Orthogonal Frequency Division Multiplexing) technique, is known to be proper for mobile high-speed data transmission system. Nevertheless, M-WiMAX is seriously sensitive to IQ imbalance caused by the LO (Local Oscillator) at the receiver. In this paper, we analyze the effect of IQ imbalance on the system, and then propose a joint optimization scheme that can optimize DFE (Digital Front-end) of mobile modem by combining operation duplicated between AGC (Automatic Gain Control) and the estimation and compensation of IQ imbalance. Simulation results show that the proposed scheme achieves the same performance of the conventional scheme while reducing the complexity of the H/W implementation.

• TTA Journal
• /
• s.111
• /
• pp.117-124
• /
• 2007

WiMAX 포럼은 WiMAX 기술이 적용된 단말기 및 기지국 간의 상호운용성을 확보하기 위해 WiMAX 포럼 공인 적합성 시험 및 상호운용성 시험을 통과한 제품만이 시장에 출시된 수 있도록 권고하고 있다. TTA는 WiMAX 포럼 국제공인 인증시험소로 지정되어 적합성 시험과 상호운용성 시험을 제공할 수 있는 인증시험소를 구축 중에 있으며, 국제 WiMAX 포럼 활동을 통해 최신 인증시험 동향을 파악하고 있다. 이에 본 고에서는 WiMAX 인증시험 개요 및 최신 동향과 TTA 공인인증시험소 구축 현황을 소개하고자 한다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.4
• /
• pp.65-72
• /
• 2009

In this paper, we propose a proxy-based fast handover scheme to improve a performance in the mobile WiMAX network using PMIPv6 for supporting the network-layer mobility. In our proposed scheme, we define three link-layer messages and one network-layer message to reduce the handover latency, and propose a buffering mechanism to minimize packet loss and solve out-of-sequence problem. A performance evaluation indicates that the proposed scheme works more efficiently than PMIPv6 in terms of the handover latency and packet loss.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.4
• /
• pp.295-301
• /
• 2011

A triple-band transceiver module for 2.3/2.5/3.5 GHz mobile WiMAX, IEEE 802.16e, applications is introduced. The suggested transceiver module consists of RFIC, reconfigurable/multi-resonance MIMO antenna, embedded PCB, mobile WiMAX base band, memory and channel selection front-end module. The RFIC is fabricated in $0.13{\mu}m$ RF CMOS process and has 3.5 dB noise figure(NF) of receiver and 1 dBm maximum power of transmitter with 68-pin QFN package, $8{\times}8\;mm^2$ area. The area reduction of transceiver module is achieved by using embedded PCB which decreases area by 9% of the area of transceiver module with normal PCB. The developed triple-band mobile WiMAX transceiver module is tested by performing radio conformance test(RCT) and measuring carrier to interference plus noise ratio (CINR) and received signal strength indication (RSSI) in each 2.3/2.5/3.5 GHz frequency.