• ETRI Journal
• /
• v.43 no.3
• /
• pp.400-413
• /
• 2021

This paper theoretically and empirically explores the reliability gain that can be obtained by installing multiple antennas in on-vehicle broadcasting receivers. Analytical derivations reveal that maximal-ratio-combining-based diversity allows a multi-antenna receiver (MR) to achieve significantly better coverage probability than a single-antenna receiver (SR). In particular, the notable MR gains for low-power reception and high-throughput services are highlighted. We also discuss various aspects of mobile MRs, including geometric coverage, volume of the users served, and impact of receiver velocity. To examine the feasibility of MRs in the real world, extensive field experiments were conducted, particularly with on-air ATSC 3.0 broadcast transmissions. Relying on the celebrated erroneous second ratio criterion, MRs with two and four antennas were verified to achieve notable reliability gains over SRs in practice. Furthermore, our results also prove that layered-division multiplexing can cope better with receiver mobility than traditional time-division multiplexing when multiple services are intended in the same radio frequency channel.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.2
• /
• pp.145-151
• /
• 2003

A global ultrasonic sensor system for self-localization of a mobile robot is proposed in this paper. The global ultrasonic sensor system consists of three or more ultrasonic transmitters fixed at some positions in the world coordinate and receivers in the moving coordinate of a mobile robot. In this global sensor system it is easy to get state vector of the mobile robot in the world coordinate from the distance information between each ultrasonic transmitter and receiver. An extended kalman filter algorithm is used to process the noisy ultrasonic signal and to estimate the state vector. In case of using several independent ultrasonic transmitters, it is necessary to avoid the cross talk among the ultrasonic waves and to synchronize between each ultrasonic transmitter and receiver. The small sized radio frequency modules are adopted to solve the cross talk and the synchronization problem Computer simulation and experiments are carried out to verify the effectiveness of the proposed ultrasonic sensor system.

• Journal of information and communication convergence engineering
• /
• v.17 no.3
• /
• pp.221-226
• /
• 2019

In this work, a transmitter/receiver front-end module (T/R FEM) with an automatic Tx/Rx switching scheme for a 2.4 GHz microwave power transfer is developed for a retro-reflective beamforming scheme. Recently, research on wireless power transfer techniques has moved to wireless charging systems for mobile devices. Retro-reflective beamforming is a good candidate for tracking the spatial position of a mobile device to be charged. In Tx mode, the T/R FEM generates a minimum of 1 W. It also comprises an amplitude and phase monitoring port for transmitting RF power. In Rx mode, it passes an Rx pilot signal from a mobile device to a digital baseband subsystem to recognize the position of the mobile device. The insertion loss of the Rx signal path is 4.5 dB. The Tx and Rx modes are automatically switched by detecting the Tx input power. This T/R FEM is a design example of T/R FEMs for wireless charging systems based on a retro-reflective beamforming scheme.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.391-394
• /
• 2006

The paper deals with the experimental GNSS receiver built at the Czech Technical University for experiments with the real GNSS signal. The receiver is based on software defined radio architecture. Receiver consists of the RF front end and a digital processor based on programmable logic. Receiver RF front end supports GPS L1, L2, L5, WAAS/EGNOS, GALILEO L1, E5A, E5B signals as well as GLONASS L1 and L2 signals. The digital processor is based on Field Programmable Gate Array (FPGA) which supports embedded processor. The receiver is used for various experiments with the GNSS signals like GPS L1/EGNOS receiver, GLONASS receiver and investigation of the EGNOS signal availability for a land mobile user. On the base of experimental GNSS receiver the GPS L1, L2, EGNOS receiver for railway application was designed. The experimental receiver is also used in GNSS monitoring station, which is independent monitoring facility providing also raw monitoring data of the GPS, EGNOS and Galileo systems via internet.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.10B
• /
• pp.1714-1721
• /
• 2000

In the mobile communication using DS-CDMA systems the problem of multiple user interference which reduce the performance is generated by multiple user access. In this paper to solve this problem we proposed the direct decision blind adaptive receiver with knowledge of only the desired user's spreading sequence. Simulation result present that the total user's power has equal gain The gain of signal to interference ratio for the proposed blind DD-LMS receiver has about 6[dB] than conventional receiver at additive white Gaussian noise and large gain at multipath channels. And when interference user's power has more large gain than desired user's power the gain of SIR for the proposed receiver has large value. And simulation result of bit error rate present that DD-LMS receiver has higher performance than LCCMA receiver. Thus the proposed blind DD-LMS receiver has robustness against interference of high power user and multipath channels.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.7
• /
• pp.1379-1385
• /
• 2009

We propose a low-power and high-speed client receiver for a mobile display digital interface (MDDI) newly in this paper. The low-power receiver is designed such that bias currents, sink and source currents, are insensitive to variations of power supply, process, temperature, and common-mode input voltage (VCM) and is able to operate at a rate of 450Mbps or above under the conditions of a power supply range of 3.0 to 3.6Vand a temperature range of -40 to 85$^{\circ}$C. And it is confirmed by a simulation result that the current dissipation is less than 500${\mu}$A. A test chip is manufactured with the Magna chip 0.35${\mu}$m CMOS process. When a test was done, the data receiver and data recovery circuits are functioning normally.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.357-360
• /
• 1998

DS/CDMA system rejected narrow-band interference and additional White Gaussian noise which are occured at multipath, intentional jammer and multiuser to share same bandwidth in mobile communication systems. Because of having not sufficiently obtained processing gain which is related to system performance, they were not effectively suppressed. In this paper, an matched filter channel model using backpropagation neural network based on complex multilayer perceptron is presented for suppressing interference of narrow-band of direct sequence spread spectrum receiver in DS/CDMA mobile communication systems. Recursive least square backpropagation algorithm with backpropagation error is used for fast convergence and better performance in matched filter receiver scheme. According to signal noise ratio and transmission power ratio, computer simulation results show that bit error ratio of matched filter using backpropagation neural network improved than that of RAKE receiver of direct sequence spread spectrum considering of con-channel and narrow-band interference.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.2
• /
• pp.62-67
• /
• 2011

In this paper, Multi Mode Receiver Module is designed in one H/W module for Multi-mode Digital Broadcasting. Multi mode means Digital TV, Mobile TV and Digital Radio on the Broadcasting. and T-DMB, DAB(+), ISDB-T and DVB-T standard. Our Module can receive various broadcasting signal such as ISDB-T, DVB-T and DAB. The Multi mode Receiver Module & demuxer was implemented using the one SoC Chip has good performances to receive the multi mode signals as well as standard interface such as SPI, to connect the main CPU Unit.

• Journal of Broadcast Engineering
• /
• v.23 no.2
• /
• pp.293-301
• /
• 2018

In ISDB-T, which is Japanese digital terrestrial TV specification based on OFDM technology, 6MHz bandwidth is divided into 13 segments. Twelve segments (full-seg) are used for high definition broadcasting for fixed receivers and one segment (one-seg) for mobile receivers. Though one-seg supports high speed mobility by using QPSK modulation, it is not suitable for large display mobile devices because of its low data rate. Full-seg using 64QAM modulation also suffers from its low mobile performance. In this paper, mobile performance of ISDB-T full-seg receiver is evaluated by applying sub-carrier interference removing scheme, high speed mobile channel estimation scheme and antenna diversity scheme.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.10
• /
• pp.4015-4033
• /
• 2015

The future mobile networks consist of hyper-dense heterogeneous and small cell networks of same or different radio access technologies (RAT). Integrating mobile networks of different RATs to provide seamless and smooth mobility service will be the target of future mobile converged network. Generally, handover from high-speed networks to low-speed networks faces many challenges from application perspective, such as abrupt bandwidth variation, packet loss, round trip time variation, connection disruption, and transmission blackout. Existing inter-RAT handover solutions cannot solve all the problems at the same time. Based on the high-layer convergence sublayer design, a new receiver-aided soft inter-RAT handover is proposed. This soft handover scheme takes advantage of multihoming ability of multi-mode mobile station (MS) to smooth handover procedure. In addition, handover procedure is seamless and applicable to frequent handover scenarios. The simulation results conducted in UMTS-WiMAX converged network scenario show that: in case of TCP traffics for handover from WiMAX to UMTS, not only handover latency and packet loss are eliminated completely, but also abrupt bandwidth/wireless RTT variation is smoothed. These delightful features make this soft handover scheme be a reasonable candidate of mobility management for future mobile converged networks.