• Journal of Convergence Society for SMB
• /
• v.6 no.2
• /
• pp.37-43
• /
• 2016

Due to the remarkable improvement of ICT, with the popularization of mobile devices and every sector of society connected by networks, an era, in which peer to peer, peer to thing, thing to thing can be connected to one another everywhere, has begun. As all the electronic devices are connected to Internet, they have become more intellectualized and automated, making convergence and process of information through the connection of the devices possible to provide a lot better services. However, those devices communicate mutually to send information and they are exposed to various security threats. Therefore, this study analyzes ZigBee, CoAP, MQTT, XMPP, which are communication-related technology of IoT, draws security threats they have, and suggests requirements that components of IoT should have. Plus, it examines real cases about security threats in IoT, and suggests a countermeasure so as to contribute to establishment of a basis for IoT to be used much more safely in the future.

• Mass Spectrometry Letters
• /
• v.5 no.4
• /
• pp.104-109
• /
• 2014

Nonmedical use of prescription stimulants such as methylphenidate (MPH) and amphetamine (AP) by normal persons has been increased to improve cognitive functions. Due to high potential for their abuse, reliable analytical methods were required to detect these prescription stimulants in biological samples. A direct injection liquid chromatography-tandem mass spectrometric (LC-MS/MS) method was developed and implemented for simultaneous determination of MPH, AP and their metabolites ritalinic acid (RA) and 4-hydroxyamphetamine (HAP) in human urine. Urine sample was centrifuged and the upper layer ($100{\mu}L$) was mixed with $800{\mu}L$ of distilled water and $100{\mu}L$ of internal standards ($0.2{\mu}g/mL$ in methanol). The mixture was then directly injected into the LC-MS/MS system. The mobile phase was composed of 0.2% formic acid in distilled water (A) and acetonitrile (B). Chromatographic separation was performed by using a Capcell Pak MG-II C18 ($150mm{\times}2.0mm$ i.d., $5{\mu}m$, Shiseido) column and all analytes were eluted within 5 min. Linear least-squares regression with a 1/x weighting factor was used to generate a calibration curve and the assay was linear from 20 to 1500 ng/mL (HAP), 40-3000 ng/mL (AP and RA) and 2-150 ng/mL (MPH). The intra- and inter-day precisions were within 16.4%. The intra- and inter-day accuracies ranged from -15.6% to 10.8%. The limits of detection for all the analytes were less than 4.7 ng/mL. The suitability of the method was examined by analyzing urine samples from drug abusers.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.1
• /
• pp.217-224
• /
• 2012

Location-Based Services(LBS) is a service that provide location information by using communication network or satellite signal. In order to provide LBS precisely and efficiently, we studied how we can reduce the error on location determination of objects such people and things. We focus on using the least square method and triangulation positioning method to improves the accuracy of the existing location determination method. Above two methods is useful if the distance between the AP and the tags can be find. Though there are a variety of ways to find the distance between the AP and tags, least squares and triangulation positioning method are wildely used. In this thesis, positioning method is composed of preprocessing and calculation of location coordinate and detail of methodology in each stage is explained. The distance between tag and AP is adjusted in the preprocessing stage then we utilize least square method and triangulation positioning method to calculate tag coordinate. In order to confirm the performance of suggested method, we developed the test program for location determination with Labview2010. According to test result, triangulation positioning method showed up loss error than least square method by 38% and also error reduction was obtained through adjustment process and filtering process. It is necessary to study how to reduce error by using additional filtering method and sensor addition in the future and also how to improve the accuracy of location determination at the boundary location between indoor and outdoor and mobile tag.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.17 no.2
• /
• pp.103-114
• /
• 2007

The existing handover authentication schemes have authentication delay and overhead of the authentication server since they have been separately studied handover authentication at the link layer and the network layer. This paper proposes a handover authentication scheme initiated by Mobile Node on FMIPv6 based mobile access networks. The main idea of the paper is to generate a session key at the mobile node side, and transfer it to the next Access Router through the authentication server. Also, the scheme has a hierarchical key management at access router. There are two advantages of the scheme. First, the generated session key can be utilized for protecting the binding update messages and also for access authentication. Second, hierarchical key management at the access router reduced the handover delay time. The security aspects on the against PFS, PBS, and DoS attack of proposed scheme are discussed.

• Analytical Science and Technology
• /
• v.31 no.4
• /
• pp.161-170
• /
• 2018

The epidemic of disorders associated with synthetic stimulants, such as methamphetamine (MA) and amphetamine (AP), is a health, social, legal, and financial problem. Owing to the high potential of their abuse and addiction, reliable analytical methods are required to detect and identify MA, AP, and their metabolites in biological samples. Thus, a dilute-and-shoot liquid chromatography-tandem mass spectrophotometry (LC-MS/MS) was developed for simultaneous determination of MA, 4-hydroxymethamphetamine (4HMA), AP, and 4-hydroxyamphetamine (4HA) in urine. Urine sample ($100{\mu}L$) was mixed with $50{\mu}L$ of mobile phase consisting of 0.4 % formic acid and methanol and $50{\mu}L$ of working internal-standard solution. Aliquots of $8{\mu}L$ diluted urine was injected into the LC-MS/MS system. For all analytes, chromatographic separation was performed using a C18 reversed-phase column with gradient elution and a total run time of 5 min. The identification and quantification were performed by multiple reaction monitoring (MRM). Linear least-squares regression was conducted to generate a calibration curve, with $1/x^2$ as the weighting factor. The linear ranges were 2.0-200, 1.0-800, and 10-2500 ng/mL for 4HA and 4HMA, AP, and MA, respectively. The inter- and intraday precisions were within 6.6 %, whereas the inter- and intraday accuracies ranged from -14.9 to 11.3 %. The low limits of quantification were 2.0 ng/mL (4HA and 4HMA), 1.0 ng/mL (AP), and 10 ng/mL (MA). The proposed method exhibited satisfactory selectivity, dilution integrity, matrix effect, and stability, which are required for validation. Moreover, the purification efficiency of high-speed centrifugation was clearly higher than 6-15 % for QC samples (n=5), which was higher than that of the membrane-filtration method. The applicability of the proposed method was tested by forensic analysis of urine samples from drug abusers.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.191-200
• /
• 2007

As the IEEE 802.11 WLAN has widely installed as a high-speed wireless network information infrastructure, there has been growing interest in both security and mobility of mobile terminals. However, for the case of mobile terminal employing IEEE 802.11i security standard, it is known that the user authentication procedure of IEEE 802.1x for stronger security enforcement may, due to its large delay, not be suitable for real-time multimedia communication. In this paper, we have proposed fast authentication method to resolve the above authentication delay problem, and verifies its performance via simulation analysis. Mobile terminals can get AP information reliably, and selectively execute authentication in advance during handover, which results in fast user authentication. In addition, by effectively managing the authentication information in mobile terminal, which are distributed in advance for pre-authentication, the problem of long-time revelation of authentication information has been solved.

• International conference on construction engineering and project management
• /
• 2024.07a
• /
• pp.1057-1064
• /
• 2024

The construction industry has witnessed a concerning rise in ladder-related accidents, necessitating the implementation of stricter safety measures. Recent statistics highlight a substantial number of accidents occurring while using ladders, emphasizing the mandatory need for preventative measures. While prior research has explored computer vision-based automatic monitoring for specific aspects such as ladder stability with and without outriggers, worker height, and helmet usage, this study extends existing frameworks by introducing a rule set for co-workers. The research methodology involves training a YOLOv5 model on a comprehensive dataset to detect both the worker on the ladder and the presence of co-workers in real time. The aim is to enable smooth integration of the detector into a mobile application, serving as a portable real-time monitoring tool for safety managers. This mobile application functions as a general safety tool, considering not only conventional risk factors but also ensuring the presence of a co-worker when a worker reaches a specific height. The application offers users an intuitive interface, utilizing the device's camera to identify and verify the presence of coworkers during ladder activities. By combining computer vision technology with mobile applications, this study presents an innovative approach to ladder safety that prioritizes real-time, on-site co-worker verification, thereby significantly reducing the risk of accidents in construction environments. With an overall mean average precision (mAP) of 97.5 percent, the trained model demonstrates its effectiveness in detecting unsafe worker behavior within a construction environment.

• Journal of Advanced Navigation Technology
• /
• v.6 no.1
• /
• pp.37-43
• /
• 2002

This paper describes the performance evaluation and analysis of Wireless Local Area Network (W-LAN) in the 5 GHz ISM-band in compliance with IEEE 802.11a. At present, most W-LAN products are based on 2.4 GHz band, but low speed (11Mbps) has the limitation to serve systems demanding high-speed data transmission. To solve this problem, it is necessary to design next generation W-LAN system with 54Mbps in the 5GHz. It is sure that implementation of next generation W-LAN will bring competitive advantages. In particular, it will support telecommunications for high-speed mobile environments as well as for fixed places such as a school zone, a lecture room, a hospital and other premises. A few simulation methods are applied to more accurate and reliable performance analysis of next generation W-LAN. To verify if continuous data service is supported for a high-speed mobile notebook, multi-path fading channels between wireless Access Point (AP) and wireless Network Interface Card (NIC) are modeled. In addition, low interference is analyzed via convolutional codes and Orthogonal Frequency-Division Multiplexing (OFDM). Also, to obtain reliable Bit Error Rate (BER), a single tap Least Mean Square (LMS) equalizer is applied. Given the above simulation, next generation W-LAN is an ideal solution for continuous data transmission in high-speed mobile environments.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.211-217
• /
• 2008

Recently, there are many efforts to support seamless mobility in 802.11 WLANs using IP Layer mobility protocols. The IP layer mobility protocols are the most efficient mechanism to guarantee the service session continuity when IP subnet is changed during handover. Even if the IP layer mobility protocols are quite efficient, the feature of the protocols that had been designed to consider only L3 layer makes it difficult to improve the performance of hand over more and more. Nowadays, to overcome this limitation of IP mobility protocols, many researchers have worked on the mobility protocols integration of different layers (e.g., L2 layer). In this paper, we propose the enhanced Proxy MIPv4 to minimize the latency of handover using MIH protocol in 802.11 WLANs. The proposed mechanism minimizes the latency of authentication by exchanging security keys between Access Routers during handover. Moreover, it also minimizes packet losses by Inter-AP Tunneling and data forwarding.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.6
• /
• pp.114-123
• /
• 2023

With the development of computer vision technology, video sensors such as CCTV are detecting incident. However, most of the current incident have been detected based on existing fixed imaging equipment. Accordingly, there has been a limit to the detection of incident in shaded areas where the image range of fixed equipment is not reached. With the recent development of edge-computing technology, real-time analysis of mobile image information has become possible. The purpose of this study is to evaluate the possibility of detecting expressway emergencies by introducing computer vision technology to dash cam. To this end, annotation data was constructed based on 4,388 dash cam still frame data collected by the Korea Expressway Corporation and analyzed using the YOLO algorithm. As a result of the analysis, the prediction accuracy of all objects was over 70%, and the precision of traffic accidents was about 85%. In addition, in the case of mAP(mean Average Precision), it was 0.769, and when looking at AP(Average Precision) for each object, traffic accidents were the highest at 0.904, and debris were the lowest at 0.629.