• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.3
• /
• pp.193-200
• /
• 2004

This pot experiment was conducted to investigate the effects of systematic variation application of Fe, Mn, Cu, and Zn on forage performance of orchardgrass and white clover. The treatments of systematic variation were 0/100, 25/75, 50/50, 75/25, and $100/0\%$ in the Fe/Cu(trial-1), Mn/Zn(trial-2), and Fe+Cu/Mn+Zn(trial-3), respectively. The treatments of Fe/Mn/Cu/Zn(trial-4) were composed of $70\%$ in main element and $10\%$ in other 3 elements, respectively. 1. By the systematic variations of Fe, Mn, Cu, and Zn, the yields were more significantly influenced in white clover than in orchardgrass. In addition, the yields of white clover were closely correlated to the trends of root/nodule growth and flowering. In the Fe/Cu trial, the relatively high yields were obtained at the $100/0\%$ in orchardgrass and at the $75/25\%$ in white clover. The yields of white clover were more negatively influenced by the 100/0(Cu control) than by the 0/100(Fe control). The yields of orchardgrass, however, tended to be opposite to the above trends. 2. In the Mn/Zn trial, both forages showed generally high yields at the high ratios of Mn/Zn. Compared with orchardgrass, the yields of white clover were greatly decreased by the Mn-deficiency(low ratio of Mn/Zn). The effects of Zn on forage yields, however, were not recognized. 3. In the Fe+Cu/Mn+Zn trial, the yields of orchardgrass tended to be slightly different among the treatments. The yields of white clover, however, were relatively' high at the 75/25, and showed a severe decrease at the 100/0 in the 2nd half cuts. In the Fe/Mn/Cu/Zn trial, the yields of white clover tended to be relatively high at the Cu and Zn treatments. It was likely to be caused by the balanced Fe/Mn ratio.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.360-363
• /
• 2006

We synthesized $(La,\;Sr)MnO_{3+{\delta}$ as a cathode for SOFC by glycine nitrate process(GNP) and knew the different properties of $(La_{1-x}Sr_x)MnO_3$ by using nitrate solution and oxide solution as starting material. In case of using nitrate solution as a starting material, main crystal phase peak of $LaMnO_3$ increased as Sr content added up and a peak of $Sr_2MnO_4\;and\;La_2O_3$ was showed as a secondary phase. We added Mn excess to control a crystal phase. In this case, the electrical conductivity had a high value 210.3S/cm at $700^{\circ}C$ On the other side, when we used oxide solution as a starting material, we found main crystal phase of $LnMnO_3$ to increase as Sr content added up and a peak of $La_2O_3$ as a secondary phase. Similary, we added Mn excess to control a crystal phase in this case. We knew $(La,\;Sr)MnO_3$ powder to sinter well and the electrical conductivity of the sintered body at $1200^{\circ}C$ for 4hrs was 152.7s/cm at $700^{\circ}C$. The sintered $(La,\;Sr)MnO_3$ powder at $1000^{\circ}C$ for 4hrs got the deoxidization peak, depending on the temperature md in case of using nitrate solution as a start ing material the deoxidization peak was showed at $450^{\circ}C$ which is lower than used a oxide solution as a starting material. As a result, when $(La,\;Sr)MnO_3$ powder was synthesized to add Mn excess and to use nitrate solution as a starting material, we found it to have the higher deoxidization property and considered it as a cathode for m properly. And we found it to have different electrical conduct ivity the synthesized $(La,\;Sr)MnO_3$ powder by using different start ing materials like nitrate solution and oxide solution which influence a sintering density and crystal phase.

• Journal of the Korean Ceramic Society
• /
• v.44 no.1 s.296
• /
• pp.52-57
• /
• 2007

We synthesized $(La_{1-x}Sr_x)MnO_3$ as a cathode for SOFC by glycine nitrate process (GNP) and knew the different properties of $(La_{1-x}Sr_x)MnO_3$ by using nitrate solution and oxide solution as a starting material. In case of using nitrate solution as a starting material, main crystal phase peak of $LaMnO_3$ increased as Sr content added up and a peak of $Sr_2MnO_4\;and\;La_2O_3$ was showed as a secondary phase. We added Mn excess to control a crystal phase. In this case, the electrical conductivity had a high value 210.3 S/cm at $700^{\circ}C$. On the other side, when we used oxide solution as a starting material, we found main crystal phase of $LaMnO_3$ to increase as Sr content added up and a peak of $La_2O_3$ as a secondary phase. Similary, we added Mn excess to control a crystal phase in this case. We knew $(La,Sr)MnO_3$ powder to sinter well and the electrical conductivity of the sintered body at $1200^{\circ}C$ for 4 h was 152.7 S/cm at $700^{\circ}C$. The sintered $(La,Sr)MnO_3$ powder at $1000^{\circ}C$ for 4 h got the deoxidization peak, depending on the temperature and in case of using nitrate solution as a starting material, the deoxidization peak was showed at $450^{\circ}C$ which is lower than used a oxide solution as a starting material. As a result, when $(La,Sr)MnO_3$ powder was synthesized to add Mn excess and to use nitrate solution as a starting material, we found it to have the higher deoxidization property and considered it as a cathode for SOFC properly. And we found it to have different electrical conductivity the synthesized $(La,Sr)MnO_3$ powder by using different starting materials like nitrate solution and oxide solution which influence a sintering density and crystal phase.

• Analytical Science and Technology
• /
• v.17 no.1
• /
• pp.1-7
• /
• 2004

The synergistic solvent extraction of Mn(II) by N-nitroso-N-phenylhydroxylamineammonium salt (cupferron) and tetrabutylammonium ion ($TBA^+$) has been studied. In the presence of $TBA^+$, over 95% Mn(II) was extracted from an aqueous solution into chloroform by the cupferron in the pH range of 4 to 10. But a part of Mn(II) was extracted with only cupferron. The ternary complex of Mn(II) was more efficiently extracted into $CH_2Cl_2$ and $CHCl_3$ than other nonpolar solvents. The extracted Mn(II) was determined in the back-extracted $HNO_3$ solution by GF-AAS. This fixed procedure was applied to the determination of trace Mn(II) in tap water samples of pH 5.0. The detection limit equivalent to 3 times standard deviation of the background absorption was 0.37 ng/mL and Mn(II) was determined with the range of 0.4 to 1.01 ng/mL in our laboratory's tap water. And the recovery was 94 to 107% in samples in which 2.0 ng/mL Mn(II) was spiked. The interferences of common concomitant elements such as Cu(II), Ca(II), Fe(III) and so on were not shown up to $10{\sim}20{\mu}g/mL$. From these results, this procedure could be concluded to be applied for the determination of trace Mn(II) in other environmental water samples.

• Electronic Materials Letters
• /
• v.14 no.6
• /
• pp.733-738
• /
• 2018

Undoped and Mn-doped $In_2O_3$ films were prepared by radiofrequency magnetron sputtering technique. The effects of Mn doping on the structural and optical properties of as-prepared films were investigated using X-ray diffraction, X-ray photoelectron spectroscopy and ultraviolet-visible spectroscopy. Mn doping can enhance the intensity of (222) peak in Mn-doped $In_2O_3$ thin film, indicating Mn dopant promotes preferred orientation of crystal growth along (222) plane. XPS analyses revealed that the doped Mn ions exist at + 2 oxidation states, substituting for the $In^{3+}$ sites in the $In_2O_3$ lattice. UV-Vis measurements show that the optical band gap $E_g$ decreases from 3.33 to 2.87 eV with Mn doping in $In_2O_3$, implying an increasing sp-d exchange interaction in the film. Our work demonstrates a practical means to manipulate the band gap energy of $In_2O_3$ thin film via Mn impurity doping, and significantly improves the photoelectrochemical activity.

• Electrical & Electronic Materials
• /
• v.2 no.2
• /
• pp.109-116
• /
• 1989

PSN-PT-PZ 삼성분계 압전세라믹의 상도로부터 유전적, 압전적 특성이 가장 양호한 MPB부근의 조성을 선택하여 MnO$_{2}$를 0-2[wt.%]첨가하였으며 일반소성법으로 시편을 제작하였다. 소결온도는 1,200-1,280[.deg.C], 시간은 0.5-3[hr]까지 변화시켰으며 MnO$_{2}$의 첨가가 시편의 유전적, 압전적 특성에 미치는 영향을 고찰하였다. 제작된 시편의 비유전상수는 MnO$_{2}$의 첨가량에 따라 증가하였으며 MnO$_{2}$가 2[wt.%]첨가된 시편 S-15(PSN:PT:PZ, 15:48:37)의 경우 605.41, 큐리온도는 MnO$_{2}$의 첨가량이 증가할수록 선형적으로 감소하였다. 각 시편의 전기기계 결합계수와 유전손실은 MnO$_{2}$의 첨가량이 0.5-1.5[wt.%]범위에서 양호한 특성을 나타내었으며 MnO$_{2}$가 0.5[wt.%] 첨가된 시편 S-5(PSN:PT:PZ, 5:48:47)의 경우 전기기계 결합계수는 0.425로 가장 높은 값을 나타내었다. MnO$_{2}$가 1[wt.%] 첨가된 시편 S-10(PSN:PT:PZ, 10:48:42)에서 공진주파수의 온도의존성이 가장 양호하게 나타났으며 각 시편에 대한 MnO$_{2}$의 첨가량이 증가할수록 결정립 크기는 감소하였다.

• Corrosion Science and Technology
• /
• v.13 no.3
• /
• pp.102-106
• /
• 2014

Nickel electrodeposition from sulfamate bath has several benefits such as low internal stress, high current density and good ductility. In nickel deposited layers, sulfur induces high temperature embrittlement, as Ni-S compound has a low melting temperature. To overcome high temperature embrittlement problem, adding manganese is one of the good methods. Manganese makes Mn-S compound having a high melting temperature above $1500^{\circ}C$. In this work, the mechanical properties of Ni-Mn deposited layers were investigated by using various process variables such as concentration of Mn$(NH_2SO_3)_2$, current density, and bath temperature. As the Mn content of electrodeposited layers was increased, internal stress and hardness were increased. By increasing current density, internal stress increased, but hardness decreased. With increasing the bath temperature from 55 to $70^{\circ}C$, internal stress of Ni deposit layers decreased, but hardness didn't change by bath temperature. It was likely that eutectoid manganese led to lattice deformation, and the lattice deformation increased hardness and internal stress in Ni-Mn layers. Increasing current density and decreasing bath temperature would increase a mount of $H_2$ absorption, which was a cause for the rise of internal stress.

• 한국전기화학회:학술대회논문집
• /
• 2000.10a
• /
• pp.32-32
• /
• 2000

• Fire Science and Engineering
• /
• v.9 no.2
• /
• pp.29-36
• /
• 1995

In this study, the effect of Mn $O_2$ additive on the electrical characteristics of PZN-PSS-PZT Pyroelectric materials for the fire detactor was studies. PZT ceramics used this experimental is 4 composite system $[$Pb(Z $n_{1}$3/ N $b_{2}$3/) $O_3$＋Pb(S $n_{1}$3/ S $b_{2}$3/) $O_3$＋PbTi $O_3$＋PbZr $O_3$$]$The dielectric constants and dissipation factors decreases as to Mn $O_2$ concentration increases. At the Mn $O_2$ 0.5($\omega$t%), Pyroelectric coefficient shows 8(10$^{-8C}$$\textrm{cm}^2$$^{\circ}C$) which have the highst value among other additive contents. It is found that output voltage shows maximum peck at Mn $O_2$0.7($\omega$t％) is associated with the higher pyroelectric coefficient and Lowered dielectric constant.t.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.1
• /
• pp.11-20
• /
• 2004

This pot experiment was conducted to investigate the effects of combined micronutrient application($T_1$;control, $T_2$; Fe, $T_3$; Fe＋Mn, $T_4$: Fe＋Mn＋Cu, $T_5$ ; Fe＋Mn＋Cu＋Zn, $T_6$ ; Fe＋Mn＋Cu＋Zn＋Mo, $T_7$ ;Fe＋Mn＋Cu＋Zn＋Mo＋B) on forage performance of pure and mixed cultures of orchardgrass and white clover. This 4th part was related to the changes in the contents of micronutrients(Fe, Mn, Cu, Zn, Mo, and B) in forages. The results obtained are summarized as follows: 1. General differences have been showed in the contents of micronutrients based on the treatments, forage species, pure/mixed culture, cutting order, and additional fertilization, especially N. Compared to pure culture, orchardgrass showed relatively high contents of Mn and Zn, and low contents of B and Fe in mixed culture. White clover, however, tended to be exactly opposed to the above trends. The contents of Cu and Mo did not show any differences between pure and mixed cultures. 2. In relative comparison, the $T_7$ influenced negatively on the contents of Cu, Zn, and Mo in orchardgrass. The $T_7$ also influenced negatively on the contents of Mo in white clover. However, the $T_7$ influenced positively on the contents of Mn in orchardgrass, and also influenced positively on the contents of Fe, Mn, and Cu in white clover. Because of the antagonism between Fe and Mn, the Fe contents in both forages were significantly decreased by the $T_3$. Under the various conditions, the differences among Fe contents tended to be more significant in white clover than in orchardgrass. 3. At the $T_6$ and $T_7$, the Mo contents in both forages tended to be relatively high. The Mo contents, however, were somewhat decreased by the $T_7$ 7/. The Mo-toxicity, which was caused by the high Mo-contents, tended to be diminished, and was likely to be prevented by the optimum B/Mo ratio and B application($T_7$ ).