• 제목/요약/키워드: Mn-oxide

검색결과 666건 처리시간 0.028초

Electrodeposition of Mn-Ni Oxide/PEDOT and Mn-Ni-Ru Oxide/PEDOT Films on Carbon Paper for Electro-osmotic Pump Electrode

  • Baek, Jaewook;Shin, Woonsup
    • Journal of Electrochemical Science and Technology
    • /
    • 제9권2호
    • /
    • pp.93-98
    • /
    • 2018
  • $MnO_2$, a metal oxide used as an electrode material in electrochemical capacitors (EDLCs), has been applied in binary oxide and conducting polymer hybrid electrodes to increase their stability and capacitance. We developed a method for electrodepositing Mn-Ni oxide/PANI, Mn-Ni oxide/PEDOT, and Mn-Ni-Ru oxide/PEDOT films on carbon paper in a single step using a mixed bath. Mn-Ni oxide/PEDOT and Mn-Ni-Ru oxide/PEDOT electrodes used in an electro-osmotic pump (EOP) have shown better efficiency compared to Mn-Ni oxide and Mn-Ni oxide/PANI electrodes through testing in water as a pumping solution. EOP using a Mn-Ni-Ru oxide/PEDOT electrode was also tested in a 0.5 mM $Li_2SO_4$ solution as a pumping solution to confirm the effect of the $Li^+$ insertion/de-insertion reaction of Ruthenium oxide on the EOP. Experimental results show that the flow rate increases with the increase in current in a 0.5 mM $Li_2SO_4$ solution compared to that obtained when water was used as a pumping solution.

Fe-Mn-Si 산화물을 이용한 인제거 흡착연구 (Phosphate removal using novel combined Fe-Mn-Si oxide adsorbent)

  • 맹민수;이해균;독고석
    • 상하수도학회지
    • /
    • 제27권5호
    • /
    • pp.631-639
    • /
    • 2013
  • 국내 하수처리장 인 방류기준이 강화되어 다양한 방법의 인 제거기술이 적용되고 있다. 흡착은 비교적 간단하면서 효과적으로 인을 제거할 수 있다. 본 연구에서는 흡착제인 Fe-Mn-Si oxide와 Fe-Mn oxide을 개발하여, 인 제거효율을 검토하였으며 이 흡착제에 대하여 Kinetic과 Isotherm모델을 비교하였다. 두 흡착제의 최대흡착양은 각각 47.8, 35.5 mg-$PO{_4}^{3-}/g$이었고, 이들은 낮은 pH에서 효과적으로 흡착하였다. Freundlish isotherm 모델이 Langmuir 모델보다 Fe-Mn-Si oxide의 흡착에 더 적합했다. 이온성 용액은 인이 흡착되는 과정에서 음이온들과 경쟁관계로 흡착능이 감소되었다. 비록 음이온과 humic물질들로부터 흡착에 영향을 받지만 Fe-Mn-Si oxide는 Fe-Mn oxide보다 흡착능이 크게 나타났다.

(Al, Ga)As 와 (Cd, Mn)Te의 복합화합물 반도체표면에서의 자연 산화물의 형성 (Native Oxide Formations on (Al, Ga) As and (Cd, Mn)Te surfaces)

  • 최성수
    • 한국진공학회지
    • /
    • 제5권1호
    • /
    • pp.6-13
    • /
    • 1996
  • The kinetics of native oxide formation on the (Al, Ga)As and (Cd, Mn)Te have been studied by X-ray photoelectron spectroscopy(XPS) and Auger electron spectroscopy(AES). The regrowth of native oxide after 3keV Ar ion sputter etch and deionized water etch has been studied. The previous report exhibited that the native oxide on CdTe and GaAs can be removed completely by deionzied(DI) water only[1]. On the other hand, the airgrown native oxide on (Al, Ga)As become nonhomogeneous and the regrown native oxide on (Cd,Mn)Te can be partially removed.

  • PDF

Electrodeposited Nano-flakes of Manganese Oxide on Macroporous Ni Electrode Exhibiting High Pseudocapacitance

  • Gobal, F.;Jafarzadeh, S.
    • Journal of Electrochemical Science and Technology
    • /
    • 제3권4호
    • /
    • pp.178-184
    • /
    • 2012
  • A porous nickel (P-Ni) substrate was prepared by selective leaching of zinc from pressed pellets containing powders of Ni & Zn in 4 M NaOH solution. Anodic deposition of manganese oxide onto the porous Ni substrate ($MnO_x$/P-Ni) formed nano-flakes of manganese oxide layers as revealed in SEM studies. Pseudocapacitance of this oxide electrode was evaluated by cyclic voltammetry (CV) and chronopotentiometry (CHP) in 2 M NaOH solution. The specific capacitance of the Mn oxide electrode was as high as 1515 F $g^{-1}$, which was ten times higher than Mn oxide deposited on a flat Ni-ribbon. 80% of capacity was retained after 200 charge/discharge cycles. The system showed no loss of activity in dry form over period of days. The impedance studies indicated highly conducting $MnO_x$/P-Ni substance and the obtained specific capacitance from impedance data showed good agreement with the charge/discharge measurements.

Effect of Organic Acids on Cr(III) Oxidation by Mn-oxide

  • Chung, Jong-Bae
    • Applied Biological Chemistry
    • /
    • 제41권4호
    • /
    • pp.241-245
    • /
    • 1998
  • Two oxidation states of chromium commonly occur in natural soil/water systems, Cr(III) and Cr(VI). The oxidized form, Cr(VI), exists as the chromate ion and is more mobile and toxic than Cr(III). Therefore oxidation of Cr(III) by various Mn-oxides in natural systems is a very important environmental concern. Organic substances can inhibit the Cr(III) oxidation by binding, Cr(III) strongly and also by dissolving Mn-oxides. Most of Cr(III) oxidation studies were carried out using in vitro systems without organic substances which exist in natural soil/water systems. In this study effect of organic acids - oxalate and pyruvate - on Cr(III) oxidation by $birnessite({\delta}-MnO_2)$ was examined. The two organic acids significantly inhibited Cr(III) oxidation by birnessite. Oxalate showed more significant inhibition than pyruvate. As solution pH was lowered in the range of 3.0 to 5.0, the Cr(III) oxidation was more strongly depressed. Addition of more organic acids reduced the Cr(III) oxidation mare extensively. Different inhibition effects by the organic acids could be due to their ability of reductive dissolution of Mn-oxides and/or Cr(III) binding. Organic acids dissolved Mn-oxide during the Cr(III) oxidation by the oxide, Dissolution by oxalic acid was much greater than that by pyruvate, and the dissolution was more extensive at lower pH. Inhibition of Cr(III) oxidation was parallel to the dissolution of Mn-oxide by organic acids. Although the effect of Cr(III) binding by organic acids on Cr(III) oxidation is not known yet, Mn-oxide dissolution by organic acids could be a main reason for the inhibition of Cr(III) oxidation by Mn-oxide in presence of organic acids. Thus oxidation of Cr(III) to Cr(VI) by various Mn-oxides in natural systems could be much less than the oxidation estimated by in vitro studies with only Cr(III) and Mn-oxides.

  • PDF

폐산의 정제 기술 및 분무 배소법에 의한 복합 산화물과 Mn-Ferrite 분말의 제조 (Purification of Waste Acid and Manufacture of Complex Oxide and Mn-Ferrite Powder by Co-Roasting Process)

  • 유재근;김정석;민병구;성낙일
    • 자원리싸이클링
    • /
    • 제7권4호
    • /
    • pp.64-75
    • /
    • 1998
  • 본 연구의 목적은 분무배소법에 의해 조성과 입도분포가 매우 균일하고 고순도인 Fe 산화물과 Mn 산화물의 복합산화물 또는 Mn 페라이트 분말을 제조하는데 있다. 본 연구에서는 우선 염산 용액에$SiO_2$, P, Al, Ca, Na 등의 불순물들을 다량 함유하고 있는 Fe와 Mn 성분을 정해진 조성으로 용해시킴으로써 분무배소의 원료용액을 제조하였다. Na와 Ca를 제외한 대부분의 불순물들은 원료 산 용액의 pH를 약 3이상으로 유지시킴으로써 공침현상에 의해 효과적으로 제거되었으며 Na와 Ca 성분은 분말제조 후 수세에 의해 제거가 가능하였다. 반면 PVA, resin amine 등의 고분자 응집제들은 불순물 제거에 거의 효과가 없는 것으로 확인되었다. 본 연구에서는 불순물들이 효과적으로 제거된 정제된 산 용액을 노즐을 이용하여 고온의 배소로 내로 분무시킴으로써 Fe 산화물과 Mn 산화물의 복합 산화물 또는 Mn 페라이트 분말을 제조하였다. 이때 생성된 분말들은 매우 균일하게 혼합되어 있었으며, 배소로 내에서의 반응온도가 증가할수록 생성된 분말의 입도는 증가하였다.

  • PDF

Mn $oxide/IrO_2/Ti$ 전극의 전기전도도 특성 (Characteristics of electrical conductivity in Mn $oxide/IrO_2/Ti$ electrode)

  • 김봉서;이동윤;이희웅;정원섭
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
    • /
    • pp.485-488
    • /
    • 2004
  • 1M, 2M 황산망간 수용액에서 25회 dipping하여 대기중 $450^{\circ}C$에서 1시간동안 열분해법으로 Mn 산화물을 형성시켜 Mn $oxide/IrO_2/Ti$ 전극을 제조하였다. 제조된 Mn $oxide/IrO_2/Ti$ 전극은 XRD를 통하여 MnO의 결정구조를 가지는 것을 확인하였다. 또한 전극 표면은 열분해법으로 발생하는 가스에 의해 미소 균열이 형성되어 있었다. dipping 횟수가 증가할수록 피복되는 Mn 산화물의 무게는 감소하였고, 이것은 $450^{\circ}C$에서의 계속적인 열처리에 의해 열분해되어 제거되는 가스로 인해 무게가 감소됨을 알 수 있었다. 황산망간 수용액의 농도가 높으면 형성되는 Mn 산화물의 무게도 증가하였다. 황산망간 수용액에서 25회까지 dipping을 한 후 전기비저항의 변화는 초기 Mn 산화물이 형성되는 경우에는 비저항이 증가하다가, 일정 횟수 이상에서는 감소함을 알 수 있었다. 또한 황산망간 수용액의 농도가 클수록 비저항이 증가하는 것으로 나타났다.

  • PDF

Oxidation of Fe-(5.3-29.8)%Mn-(1.1-1.9)%Al-0.45%C Alloys at 550-650 ℃

  • Park, Soon Yong;Xiao, Xiao;Kim, Min Ji;Lee, Geun Taek;Hwang, Dae Ho;Woo, Young Ho;Lee, Dong Bok
    • Corrosion Science and Technology
    • /
    • 제21권1호
    • /
    • pp.53-61
    • /
    • 2022
  • Alloys of Fe-(5.3-29.8)%Mn-(1.1-1.9)%Al-(0.4-0.5)%C were oxidized at 550 ℃ to 650 ℃ for 20 h to understand effects of alloying elements on oxidation. Their oxidation resistance increased with increasing Mn level to a small extent. Their oxidation kinetics changed from parabolic to linear when Mn content was decreased and temperature was increasing. Oxide scales primarily consisted of Fe2O3, Mn2O3, and MnFe2O4 without any protective Al-bearing oxides. During oxidation, Fe, Mn, and a lesser amount of Al diffused outward, while oxygen diffused inward to form internal oxides. Both oxide scales and internal oxides consisted of Fe, Mn, and a small amount of Al. The oxidation of Mn and carbon transformed γ-matrix to α-matrix in the subscale. The oxidation led to the formation of relatively thick oxide scales due to inherently inferior oxidation resistance of alloys and the formation of voids and cracks due to evaporation of manganese, decarburization, and outward diffusion of cations across oxides.

스피넬계 Mn-Zn 페라이트의 망간이온이 미치는 영향 (Behavior of Mn Ions in Spinel-type Mn-Zn-Fe Oxide System)

  • 권오흥
    • 자원리싸이클링
    • /
    • 제9권5호
    • /
    • pp.11-15
    • /
    • 2000
  • The sample made of $Mn_3O_4$ indicated an excellent frequency dependency for intial permeability and core loss. Moreover the homogeneity of cation configuration in he spinel structure was confirmed by X-ray diffraction analysis. The result of homogeneity of the spinel structural coincided with the analytical results of temperature dependence of magnetization. Furthermore, the influence of manganese oxide as starting material, on homogeneity of spinel structure was examined by using thermogravimetry-differential thermal analysis. It may be concluded that the reaction between $Mn_3O_4$ and Fe-Zn oxide mixture proceeds at fist in all combination of manganese oxide and oxie mixture, and then Mn-Zn-Fe spinel was formed.

  • PDF

전산 고체물리를 이용한 바이오 산화망간 광물의 금속흡착과 광화학 반응도의 이해 (Reactivity of Biogenic Manganese Oxide for Metal Sequestration and Photochemistry: Computational Solid State Physics Study)

  • 권기덕
    • 한국광물학회지
    • /
    • 제23권2호
    • /
    • pp.161-170
    • /
    • 2010
  • 많은 미생물들이 수용성 망간이온($Mn^{2+}$)을 불용성인 산화망간($Mn^{4+}$) 광물로 산화 침전시키는데, 이와 같은 생물학적 산화반응은 비생물학적 산화반응보다 훨씬 빠르게 일어난다. 이처럼 미생물에 의해 생성된 바이오 산화망간 광물은 표면의 강한 흡착성과 산화환원 반응을 통해 생지구화학 순환과 환경오염물질의 생물흡수도에 큰 역할을 한다. 본 논평은 양자역학의 밀도범함수 이론에 바탕을 둔 전산모사를 이용하여 산화망간 광물 표면의 독성금속 흡착의 자세한 기작과 망간원자 빈자리의 광화학적 역할을 새롭게 밝힌 최근 연구결과를 소개한다.