• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.12
• /
• pp.8-13
• /
• 2001

Cerium oxide ($CeO_2$) thin film has been proposed as a buffer layer between the ferroelectric thin film and the Si substrate in Metal-Ferroelectric-Insulator-Silicon (MFIS) structures for ferroelectric random access memory (FRAM) applications. In this study, $CeO_2$ thin films were etched with $Cl_2$/Ar gas mixture in an inductively coupled plasma (ICP). Etch properties were measured for different gas mixing ratio of $Cl_2$($Cl_2$+Ar) while the other process conditions were fixed at RF power (600 W), dc bias voltage (-200 V), and chamber pressure (15 mTorr). The highest etch rate of $CeO_2$ thin film was 230 ${\AA}$/min and the selectivity of $CeO_2$ to $YMnO_3$ was 1.83 at $Cl_2$($Cl_2$+Ar gas mixing ratio of 0.2. The surface reaction of the etched $CeO_2$ thin films was investigated using x-ray photoelectron spectroscopy (XPS) analysis. There is a Ce-Cl bonding by chemical reaction between Ce and Cl. The results of secondary ion mass spectrometer (SIMS) analysis were compared with the results of XPS analysis and the Ce-Cl bonding was monitored at 176.15 (a.m.u). These results confirm that Ce atoms of $CeO_2$ thin films react with chlorine and a compound such as CeCl remains on the surface of etched $CeO_2$ thin films. These products can be removed by Ar ion bombardment.

• Food Science of Animal Resources
• /
• v.35 no.6
• /
• pp.815-823
• /
• 2015

This study developed probabilistic models to describe Listeria monocytogenes growth responses in meat products with low concentrations of NaNO₂ and NaCl. A five-strain mixture of L. monocytogenes was inoculated in NBYE (nutrient broth plus 0.6% yeast extract) supplemented with NaNO₂ (0-141 ppm) and NaCl (0-1.75%). The inoculated samples were then stored under aerobic and anaerobic conditions at 4, 7, 10, 12, and 15℃ for up to 60 d. Growth response data [growth (1) or no growth (0)] for each combination were determined by turbidity. The growth response data were analyzed using logistic regression to predict the growth probability of L. monocytogenes as a function of NaNO₂ and NaCl. The model performance was validated with the observed growth responses. The effect of an obvious NaNO₂ and NaCl combination was not observed under aerobic storage condition, but the antimicrobial effect of NaNO₂ on the inhibition of L. monocytogenes growth generally increased as NaCl concentration increased under anaerobic condition, especially at 7-10℃. A single application of NaNO₂ or NaCl significantly (p<0.05) inhibited L. monocytogenes growth at 4-15℃, but the combination of NaNO₂ or NaCl more effectively (p<0.05) inhibited L. monocytogenes growth than single application of either compound under anaerobic condition. Validation results showed 92% agreement between predicted and observed growth response data. These results indicate that the developed model is useful in predicting L. monocytogenes growth response at low concentrations of NaNO₂ and NaCl, and the antilisterial effect of NaNO₂ increased by NaCl under anaerobic condition.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.1
• /
• pp.113-123
• /
• 2016

This study was to investigate the antifungal activity of A. holophylla essential oil against dermatophytes, such as Epidermophyton floccosum, Trichophyton mentagrophytes and Trichophyton rubrum, and to determine the potential effective compound as dermatitis treatment. To evaluate the potential antifungal activities of A. holophylla essential oil and its fractions, paper disc diffusion and agar dilution method tested with morphological observation. Also, their major constituents were analyzed by GC/MS. To determine synergic effects of active ingredient from A. holophylla essential oil were carried out by checkerboard microtiter plate testing. The morphological changes of the dermatophytes exposed to active fraction G4 were observed by electron microscopes. As the results, the highest activities were identified in the fraction containing ${\alpha}$-bisabolol. A mixture of ${\alpha}$-bisabolol and bornyl acetate showed the synergy effects, expressing high potential effects. Also, morphological observation using electron microscopes showed a dramatic changes of cell membrane of E. floccosum and T. rubrum exposed to fraction G4 containing ${\alpha}$-bisabolol. In conclusion, A. holophylla essential oil and its constituents were expected to be used as antifungal agent or raw material for dermatitis therapy.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.105-105
• /
• 2009

$ZrO_2$ is one of the most attractive high dielectric constant (high-k) materials. As integrated circuit device dimensions continue to be scaled down, high-k materials have been studied more to resolve the problems for replacing the EY31conventional $SiO_2$. $ZrO_2$ has many favorable properties as a high dielectric constant (k= 20~25), wide band gap (5~7 eV) as well as a close thermal expansion coefficient with Si that results in good thermal stability of the $ZrO_2/Si$ structure. In order to get fine-line patterns, plasma etching has been studied more in the fabrication of ultra large-scale integrated circuits. The relation between the etch characteristics of high-k dielectric materials and plasma properties is required to be studied more to match standard processing procedure with low damaged removal process. Due to the easy control of ion energy and flux, low ownership and simple structure of the inductively coupled plasma (ICP), we chose it for high-density plasma in our study. And the $BCl_3$ included in the gas due to the effective extraction of oxygen in the form of $BCl_xO_y$ compound In this study, the surface kinetic properties of $ZrO_2$ thin film was investigated in function of Ch addition to $BCl_3/Ar$ gas mixture ratio, RF power and DC-bias power based on substrate temperature. The figure 1 showed the etch rate of $ZrO_2$ thin film as function of gas mixing ratio of $Cl_2/BCl_3/Ar$ dependent on temperature. The chemical state of film was investigated using x-ray photoelectron spectroscopy (XPS). The characteristics of the plasma were estimated using optical emission spectroscopy (OES). Auger electron spectroscopy (AES) was used for elemental analysis of etched surface.

• KSBB Journal
• /
• v.19 no.4
• /
• pp.269-273
• /
• 2004

A simple, fast and reproducible quantitative analysis method for sugar concentration composed in oligosaccharide mixture was developed. Two glass TLC plates were prepared per sample. After dipping one plate into the copper bicinchoninate reagent and the other plate into 5% sulfuric acid solution, both plates were baked in microwave oven until sugar spots were developed or the surface temperature of TLC plate becomes 60 to 70 $^{\circ}C$. The corrective factor values [F value =(the value of total sugar concentration converted as glucose unit/the value of reducing sugar concentration converted as glucose unit)/(polymerization degree of sugar)] of different molecular weight sugars were determined. Within the concentration of 0.25∼1.0 $\mu\textrm{g}$ in each sample loaded, the fructose-F (corrective factor value of fructose) was 0.45, yet for the higher concentration (2.5∼7.5 $\mu\textrm{g}$) fructose-F was 1.0. In case of glucose, in the range of 0.5∼7.5 $\mu\textrm{g}$, glucose-F was same as fructose-F, 1.0. However, as the molecular weight of sugar was increased, the F values were decreased in both maltodextrin and isomaltodextrin oligosaccharides in 0.5∼7.5 $\mu\textrm{g}$ of each sample loaded. Interestingly, F values were equal for the same molecular weight sugars, although the structures were different from each other. Using F value of each sugar, we could determine and compare the exact total sugar concentration of different molecular weight maltooligosaccharide and isomaltooligosaccharide. We also could determine if the unknown sugar was a reducing or non-reducing compound by using optimized TLC with microwave oven method.

• Economic and Environmental Geology
• /
• v.39 no.3 s.178
• /
• pp.285-299
• /
• 2006

The Mireuksaji stone pagoda in Iksan is the largest stone pagoda existing in Eastern Asia. It was assumed that originally it had been established in the shape of nine-storied pagoda but as time went by only six-storied pagoda remained partially due to collapsing, repair and reconstruction. According to the reference, we can't make sure when its modification happened. The form that the pagoda is having now, was modified with concrete by the Japanese during the 1910s. The materials mixed in concrete were mixture of Portland cement, all sorts of stone, sand, and a little bit of new building stone, additive and compound. And also these materials were applied to cultural assets without any experiment at the time of 1910s as maintenance, which are still used recently. To prevent the change of its shape, the west side, south side and the north side which is partially destructed was rebuilt and reinforced with concrete and some of the deformed parts were also filled. The amounts of concrete used were about 200 tons. Such method had prevented the pagoda from destructing, however, by choosing a wrong repair method, its surface of the stone has secondary contaminants and precipitation caused by concrete. This kind of contamination speeds up the weathering which accelerates the aging mechanism of the stone to make it even harder to revive the absence of historical nature. Therefore, we are to find the best cleaning method to remove the secondary hazard contaminants.

• Applied Chemistry for Engineering
• /
• v.26 no.5
• /
• pp.549-556
• /
• 2015

Anti-insect repellent silica sol from mixture with silica and anti-insect repellent solution extracted from medicinal herbs was prepared. The micron size porous sphere powder with anti-insect repellent solution was prepared by the spray drying method. The characteristic of anti-insect repellent powder using spray drying method was analyzed by FE-SEM, PSA, TGA with the concentration of anti-insect repellent sol (anti-insect repellent solution and silica) and conditions of spray drier. The average particle size of 4, 7 wt% and 10 wt% of anti-insect repellent sol concentration were 8.3, $9.5{\mu}m$ and $11.7{\mu}m$, respectively. The particle size is increasing with high concentration of anti-insect repellent sol. Other hands, particle size as the temperature of inlet nozzle and velocity of sol injection were nearly same at high velocity of gas injection. Also, Anti-insect repellent impregnation in porous sphere powder were confirmed by TGA methode and its thermal property was stable up to $200^{\circ}C$. We expect that anti-insect repellent powder is applied for plastic compound and process of film manufacture.

• Journal of Applied Biological Chemistry
• /
• v.53 no.2
• /
• pp.77-81
• /
• 2010

The seed of cowpea (Vigna sinensis K.) was extracted with 80% aqueous methanol (MeOH). And the concentrated extract was partitioned with ethyl acetate (EtOAc), n-butanol (n-BuOH) and $H_2O$, successively. The repeated silica gel and octadecyl silica gel (ODS) column chromatographic separations for the EtOAc and n-BuOH fractions led to isolation of four sterols. And the chemical structures of the compounds were determined as a mixture of stigmasterol and $\beta$-sitosterol with the ratio of 4 to 3 (1), 7-ketositosterol (2), and stigmasterol 3-O-$\beta$D-glucopyranoside (3) from the interpretation of spectroscopic data including nuclear magnetic resonance (NMR) spectrum metric, mass (MS) spectrum metric and infrared (IR) spectroscope. This study reports the first isolation of $\beta$-sitosterol, 7-ketositosterol, and stigmasterol 3-O-$\beta$-D-glucopyranoside from the seed of Vigna sinensis K. In addition, compound 2, 7-ketositosterol, is rarely occurred in natural source including plant.

• Korean Journal of Pharmacognosy
• /
• v.38 no.2 s.149
• /
• pp.197-203
• /
• 2007

Benign prostatic hyperplasia (BPH) is one of the common disease in elderly men. Recently old-age population is increased and we are growing more and more interested in clinical importance of BPH. In this study, the effect of PLX, which was the mixture of tomato extract (including 2% of lycopene) and chitooligosaccharide, on prostatic cancer cell and testosterone-induced BPH in adult rats of the Sprague Dawley strain was determined. The cell viability was evaluated by MTT method using L929 and LNCaP cell line, pretreated with various concentrations of PLX. The expression of prostatic specific antigen (PSA) and 5${\alpha$}$-reductase genes were evaluated by realtime PCR using LNCaP cell line and compared various concentrations of PLX with 50 ${\mu}$M of finasteride. An experimental prostatic hyperplasia was induced in male Sprague Dawley rats by giving testosterone for 8 weeks. After 2 weeks from start of giving testosterone, PLX and finasteride were administered orally once a day. The results were analyzed with prostate weight per body weight at 8 weeks. Cell viability of L929 cell line decreased specifically at the concentration of 2000 ${\mu}$g/mf of PLX. The cytotoxicity of PLX to the LNCaP cell line was shown at above 500 ${\mu}$g/ml of PLX. The inhibitory effect of PLX to the expression of PSA and 5${\alpha$}$-reductase genes in LNCaP cell line increased with the concentration of PLX. In vivo study, the results of PLX and finasteride administered group were 3.75${\pm}$0.60 and 3.49${\pm}$0.49 prostate weight ${\times}10^3$/body weight, which were lower than the result of BPH induced group (4.74${\pm}$0.58). These results suggested that PLX may be an effective material in BPH by having the role of the 5a-reductase inhibitor.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.7 no.3
• /
• pp.122-130
• /
• 2004

Crude oil is complex mixture of thousands of different organic compound formed from a variety of organic materials that are chemically converted under differing geological conditions over long periods of time. Also oil composition varies according to crude source, refining, processing, handling and storage. The oil fingerprint method is application of specific knowledge of petrochemicals and use of sophisticated analytical equipment and techniques to identify the source(s) of oil pollution. KNMPA currently utilizes three primary analytical techniques: Gas Chromatography (GC), Fluorescence Spectroscopy(FL) and Infrared Spectroscopy(IR). Of all these techniques, GC technique are most widely used. Gas Chromatography is used as a primary analytical method because high reliableness, high separating efficiency and repeatability, but it is timeconsumable. The study results of identification of waterborne spilled oil by Fast Gas Chromatograph method showed that analytical time is cut down to 30minutes in comparison with packed column method and chromatograms represent high resolution and high repeatability.