• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.44-44
• /
• 2017

Recently, the occurrences of extreme flooding and drought, often in the same areas, have increased due to climate change. We tested the hypothesis that wetland species could help upland species under flood conditions; that is, the roots of wetland crops may supply $O_2$ to the roots of upland crops by a series of experiments conducted in both humid Japan and semi-arid Namibia (See Iijima et al, 2016 and Awala et al, 2016). Firstly, flooding tolerance of upland-adapted staple crops-pearl millet (Pennisetum glaucum) and sorghum (Sorghum bicolor) mix-cropped with rice (Oryza spp.) was investigated in glasshouse and laboratory experiments in Japan. We found a phenomenon that strengthens the flood tolerance of upland crops when two species-one wetland and one drought tolerant-were grown using the mixed cropping technique that results in close tangling of their root systems, hereinafter referred to "close mixed-planting". This technique improved the photosynthetic and transpiration rates of the upland crops subjected to flood stress ($O_2$-deficient nutrient culture). Oxygen transfer was suggested between the two plants mix-cultured in water, implying its contribution to the phenomenon that improved the physiological status of upland crops under the simulated flood stress. Secondly, we further tested whether this phenomenon would be expressed under field flood conditions. The effects of close mixed-planting of pearl millet and sorghum with rice on their survival, growth and grain yields were evaluated under controlled field flooding in semi-arid Namibia during 2014/2015-2015/2016. Single-stand and mixed plant treatments were subjected to 11-22 day flood stress at the vegetative growth stage. Close Mixed-planting increased seedling survival rates in both pearl millet and sorghum. Grain yields of pearl millet and sorghum were reduced by flooding, in both the single-stand and mixed plant treatments, relative to the non-flooded upland yields, but the reduction was lower in the mixed plant treatments. In contrast, flooding increased rice yields. Both pearl millet-rice and sorghum-rice mixtures demonstrated higher land equivalent ratios, indicating a mixed planting advantage under flood conditions. These results indicate that mix-planting pearl millet or sorghum with rice could alleviate flood stress on dryland cereals. The results also suggest that with this cropping technique, rice could compensate for the dryland cereal yield losses due to field flooding. Mixed cropping of wet and dryland crops is a new concept to overcome flood stress under variable environmental conditions.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.911-920
• /
• 1989

It this study, beam-type bend specimen is used to evaluate the interlaminar fracture toughness of laminated composite under mixed-mode deformations. The specimen is loaded under three-point bending and hence produced mixed-mode deformations in the vicinity of the crack tip according to the variation of the thickness ratio on delamination plane. Total energy release rate is obtained by elementary beam theory considering the effect of shear deformation. The partitioning of total value into mode-I and mode-II components is also performed. The mixed-mode interlaminar fracture toughness is evaluated by experiments on specimens with several thickness ratios of delamination plane. As the part of delamination plane is thicker, the effect of shear deformation on total energy release rate is increased. Beam-type bend specimen men may be applied to obtain informations on the mixed-mode interlaminar fracture behavior of laminated composites.

• Steel and Composite Structures
• /
• v.29 no.4
• /
• pp.451-464
• /
• 2018

This paper presents some quasi-static tests for 4 mixed columns composed of CFST column and RC column. The seismic performance and failure mode were studied under low-cyclic revised loading. The failure mode was observed under different axial compression ratios. The hysteretic curve and skeleton curve were obtained. The effects of axial compression ratio on yield mechanism, displacement ductility, energy dissipation, stiffness and strength attenuation were analyzed. The results indicate that the failure behavior of CFST-RC mixed column with archaized style is mainly caused by bending failure and accompanied by some shear failure. The axial compression ratio performs a control function on the yielding order of the upper and lower columns. The yielding mechanism has a great influence on the ductility and energy dissipation capacity of specimens. Based on the experiment, finite element analysis was made to further research the seismic performance by ABAQUS software. The variable parameters were stiffness ratio of upper and lower columns, axial compression ratio, yielding strength of steel tube, concrete strength and rebar ratio. The simulation results show that with the increase of stiffness ratio of the upper and lower columns, the bearing capacity and ductility of specimens can correspondingly increase. As the axial compression ratio increases, the ductility of the specimen decreases gradually. The other three parameters both have positive effect on the bearing capacity but have negative effect on the ductility. The results can provide reference for the design and engineering application of mixed column consisted of CFST-RC in Chinese archaized buildings.

• Computers and Concrete
• /
• v.17 no.6
• /
• pp.787-799
• /
• 2016

Climate anomalies in recent years, numerous natural disasters caused by landslides and a large amount of entrained sands and stones in Taiwan have created significant disasters and greater difficulties in subsequent reconstruction. How to respond to these problems efficaciously is an important issue. In this study, the sands and stones were doped with recycled materials (waste LCD glass sand, slag powder), and material was mixed for recycled ready-mixed soil. The study is based on security and economic principles, using flowability test to determine the water-binder ratio (W/B=2.4, 2.6, and 2.8), a fixed soil: sand ratio of 6:4 and a soil: sand: glass ratio of 6:2:2 as fine aggregate. Slag (at concentrations of 0%, 20%, and 40%) replaced the cement. The following tests were conducted: flowability, initial setting time, unit weight, drop-weight and compressive strength. The results show that the slump values are 220 -290 mm, the slump flow values are 460 -1030 mm, and the tube flow values are 240-590 mm, all conforming to the objectives of the design. The initial setting times are 945-1695 min. The unit weight deviations are 0.1-0.6%. The three groups of mixtures conform to the specification, being below 7.6 cm in the drop-weight test. In the compressive strength test, the water-binder ratios for 2.4 are optimal ($13.78-17.84kgf/cm^2$). The results show that Recycled ready-mixed soil materials (RRMSM) possesses excellent flowability. The other properties, applied to backfill engineering, can effectively save costs and are conducive to environmental protection.

• Journal of the Korean GEO-environmental Society
• /
• v.24 no.11
• /
• pp.41-49
• /
• 2023

In this study, we analyzed the settlement characteristics of rockfill embankments mixed with soil by confirming the physical properties of soil materials mixed with silty materials and analyzing the compression characteristics of gravel materials according to the mixing ratio of soil materials. For this, we mixed silty materials into sandy soil to analyze the compression characteristics of soil materials, and we constructed a foundation by mixing various ratios of soil into rockfill materials with a particle distribution similar to that of river gravel, and conducted a one-dimensional compression experiment using a medium-sized chamber. As a result of the experiment, in the case of mixed soil materials, the Transition Fine Content (TFC) appeared in the range of 21~26% depending on the load condition, and in the case of rockfill materials mixed with soil, as the void filling ratio of soil in gravel samples increases, both total compression and creep compression decreases, but after a 50% mixing ratio, the settlement of amount increases again.

• Journal of Korea Water Resources Association
• /
• v.38 no.12 s.161
• /
• pp.1009-1020
• /
• 2005

In this paper, impervious area ratios for 11 land cover types of Seoul city were estimated and corresponding CNs were calculated. And linear regression equations were derived to predict impervious area ratios based on five major urban land cover types including the residential, industrial, transportation, commercial, and commercial-residential mixed areas. From the comparative analysis of impervious area ratios for the US SCS CNs and the CNs derived in this study for Seoul city, it is revealed that residential areas show the biggest difference followed by industrial and commercial ones. And in turn, these increased impervious area ratios resulted in Increased CNs for Seoul city including increases by 13 for residential, 12 for industrial and 5 for commercial areas. Therefore, it is suggested that applying the US SCS CNs to Korean urbanized areas may underestimate the flood runoff potential.

• Journal of Ginseng Research
• /
• v.24 no.1
• /
• pp.23-28
• /
• 2000

To develop a dry alcohol containing red ginseng extract, dry alcohols composed of ethanol, water, dextrin and sodium lauryl sulfate were prepared using spray dryer, and their ethanol contents and encapsulation efficiencies were determined. An optimal dry alcohol containing red ginseng extract was chosen and the feeling for its oral administration was evaluated. Dextrin at dextrin/water weight ratios below 1.6/l and ethanol at ethanol/water weight ratios below 1/1 remarkably Increased both the ethanol contents and encapsulation efficiencies of dry alcohols. However dextrin at dextrin/water weight ratios above 1.6/1 and ethanol at ethanol/water weight ratios above 1/1 slightly decreased the both parameters. It might be due to the low solubility of dextrin in ethanol and limited diffusion coefficient of ethanol to the dextrin shell. furthermore, 0.5% (w/w) sodium lauryl sulfate gave the maximum ethanol content of dry alcohol. The more increased amounts of red ginseng extract were added, the more increased amounts of ginsenoside Rb1 but the more decreased amounts of ethanol were encapsulated in dry alcohols. A dry alcohol containing red ginseng extract was prepared with dextrin/ethanol/water (1/1/1, w/w/w) mixed solution, in which 0.5% (w/w) sodium lauryl sulfate and 20% (w/w) red ginseng extract were dissolved. It contained the ethanol contents of31.17$\pm$ 1.33% (w/w) and ginsenoside Rbl of 243.0$\pm$7.0 $\mu$g/g. It gave the moderate taste of red ginseng extract at Its oral administration with or without water Thus, the dry alcohol containing red ginseng extract can be further developed as a more convenient dosage form for red ginseng extract.

• Korean Journal of Materials Research
• /
• v.29 no.10
• /
• pp.579-585
• /
• 2019

In this study, we investigate the effect of Al/N source ratios and growth rates on the growth and structural properties of AlN films on c-plane sapphires by plasma-assisted molecular beam epitaxy. Both growth rates and Al/N ratios affect crystal qualities of AlN films. The full width at half maximum (FWHM) values of ($10{\bar{1}}5$) X-ray rocking curves (XRCs) change from 0.22 to $0.31^{\circ}$ with changing of the Al/N ratios, but the curves of (0002) XRCs change from 0.04 to $0.45^{\circ}$ with changing of the Al/N ratios. This means that structural deformation due to dislocations is slightly affected by the Al/N ratio in the ($10{\bar{1}}5$) XRCs but affected strongly for the (0002) XRCs. From the viewpoint of growth rate, the AlN films with high growth rate (HGR) show better crystal quality than the low growth rate (LGR) films overall, as shown by the FWHM values of the (0002) and ($10{\bar{1}}5$) XRCs. Based on cross-sectional transmission electron microscope observation, the HGR sample with an Al/N ratio of 3.1 shows more edge dislocations than there are screw and mixed dislocations in the LGR sample with Al/N ratio of 3.5.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.2
• /
• pp.162-168
• /
• 2007

Compatible and incompatible interactions of near-isogenic lines containing one of Xa1, Xa3, and Xa7 resistance genes with Japanese bacterial blight isolates (T7174, T7147, and T7133) were examined in order to determine the variation of bacterial blight resistance and the stability of resistance gene. IRBB 101 line having a Xal gene was compatible (host susceptible) with T7147 and T7133 isolates but incompatible (host resistant) with T7174 isolate at all the tested rice growth stages. IRBB 103 line having a Xa3 gene was susceptible or moderately resistant to the three isolates at seedling and maximum tillering stage but resistant at heading stage. IRBB 101 line having a Xa7 gene was semi-compatible with the three isolates at seedling stage but incompatible at the other growth stages. Overall there were clear differences between compatible and incompatible interactions of rice with Xanthomonas oryzae pv. oryzae races. In the mixed inoculations of compatible and incompatible isolates, the lesion length from near-isogenic lines decreased as the ratios of incompatible races increased. When the distinction between compatible and incompatible isolates was unclear, there was almost no variation of lesion length regardless of mixed ratios. The pathogenicity of the mixed races in the incompatible Interactions increased rather than the individual inoculation whereas the lesion length of compatible interactions was similar to that of the individual inoculation. These data indicate the incompatible races inhibit the virulence of a compatible race but compatible races increase the disease occurrence due to incompatible races. Furthermore, IRBB 107 line that showed resistance to all the isolates at all the tested growth stages was considered as a good parent f3r breeding of resistant variety.

• Clean Technology
• /
• v.16 no.2
• /
• pp.132-139
• /
• 2010

The Cu-Mn mixed oxide catalysts with different molar ratios of Cu/(Cu+Mn) prepared by co-precipitation method have been investigated in CO oxidation at $30^{\circ}C$. The catalysts used in this study were characterized by X-ray Diffraction (XRD), $N_2$ sorption, X-ray photoelectron spectroscopy (XPS), and $H_2$-temperature programmed reduction $(H_2-TPR)$ to correlate with catalytic activities in CO oxidation. The $N_2$ adsorption-desorption isotherms of Cu-Mn mixed oxide catalysts showed a type 4 having pore range of 7-20 nm and BET surface area was increased from 17 to $205\;m^2{\cdot}g^{-1}$ with increasing of Mn content. The XPS analysis showed the surface oxidation state of Cu and Mn represented $Cu^{2+}$and the mixture of $Mn^{3+}$ and $Mn^{4+}$, respectively. Among the catalysts studied here, Cu/(Cu+Mn) = 0.5 catalyst showed the highest activity at $30^{\circ}C$ in CO oxidation and the catalytic activity showed a typical volcano-shape curve with respect to Cu/(Cu+Mn) molar ratios. The water vapor showed a prohibiting effect on the efficiency of the catalyst which is due to the competitive adsorption of carbon monoxide on the active sites of catalyst surface and finally the formation of hydroxyl group with active metals.