• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.04a
• /
• pp.388-393
• /
• 1996

This study evaluated characteristics and performance of recycled concrete as a pavement which was constructed on a low volume road. The recycled concrete was prepared by replacing a half of coarse aggregate with recycled aggregate. Natural sand from a source was used as fine aggregate together with admixtures such as plasticizer and fly ash (0.8% and 5% by wt. of cement, respectively). The length, thickness and width of the pavement were 100mm, 20cm and 3m, respectively. From construction experience, it was found that workability and finishability of the recycled concrete mixture were relatively poor, but strengths were satisfactory. Flexural strength, compressive strength and elastic modulus at 28 days were approximately 45Kg/$\textrm{cm}^2$, 250Kg/$\textrm{cm}^2$, and 240,000 Kg/$\textrm{cm}^2$, respectively. The pavement could be constructed by hand without much difficulty. The surface was finished smoothy by wet fabric and only minor cracks were found on the surface.

• Structural Monitoring and Maintenance
• /
• v.10 no.3
• /
• pp.191-205
• /
• 2023

In this paper, through operational modal analysis and ambient vibration tests, the dynamic characteristics of a multi-span simply-supported reinforced concrete highway bridge deck was determined and the results were used to assess the quality of construction of the individual spans. Supporting finite element (FE) models were created and analyzed according to the design drawings. After carrying out the dynamic tests and extracting the modal properties of the deck, the quality of construction was relatively assessed by comparing the results obtained from all the tests from the individual spans and the FE results. A comparison of the test results among the different spans showed a maximum difference value of around 9.3 percent between the superstructure's natural frequencies. These minor differences besides the obtained values of modal damping ratios, in which the differences were not more than 5 percent, can be resulted from suitable performance, health, and acceptable construction quality of the bridge.

• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.49-57
• /
• 2011

This study deals with the traffic accident of arterial link sections in the case of Cheongju. The purpose of the study is to develop the traffic accident model by the function of arterial links. In pursuing the above, this study gives particular attentions to developing the appropriate models using the accident data of main and minor arterial roads divided by 472 small link sections. The main results analyzed are as follows. First, as the t test on the accident characteristics of main and minor arterial roads shows that there are differences in the number of accident and EPDO(equivalent property damage only) between two roads, the development of models by function is analyzed to be appropriate. Second, it is analyzed that ZINB models are all statistically suitable to the number of accident and EPDO of main arterial roads. Third, the analysis shows that EPDOs of minor arterial roads fit to ZINB, and the number of the accident fit to ZIP model. Finally, the common variables of main arterial roads are evaluated to be the traffic volume and the number of inflection point, and those of minor be the average grade.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.75-85
• /
• 2006

Currently, cross-section design can not reflect highway function and traffic volume, various construction. This research paper provides analysis of traffic accident type, improvement of traffic operation and safety, assessment for new cross-section standards of two-lane highway. Research show higher accident rate on 6$\sim$8.9m road than 9$\sim$12.9m road width in two-lane highway. Typical improvement is widening on lane and shoulder width. Simulation show large increase on 6$\sim$7m road delay-time in 1,200vph. In contrast 10$\sim$11.5m road shows slight change on delay-time. This research paper provides various cross-section construction by traffic volume in minor arterial and distributor two-lane highway. The new cross-section design provides adopting highway volume, various construction and flexibility.

• International Journal of Highway Engineering
• /
• v.17 no.6
• /
• pp.65-73
• /
• 2015

PURPOSES : This study tries to develop the accident models of 4-legged signalized intersections in Busan Metropolitan city with random parameter in count model to understanding the factors mainly influencing on accident frequencies. METHODS : To develop the traffic accidents modeling, this study uses RP(random parameter) negative binomial model which enables to take account of heterogeneity in data. By using RP model, each intersection's specific geometry characteristics were considered. RESULTS : By comparing the both FP(fixed parameter) and RP modeling, it was confirmed the RP model has a little higher explanation power than the FP model. Out of 17 statistically significant variables, 4 variables including traffic volumes on minor roads, pedestrian crossing on major roads, and distance of pedestrian crossing on major/minor roads are derived as having random parameters. In addition, the marginal effect and elasticity of variables are analyzed to understand the variables'impact on the likelihood of accident occurrences. CONCLUSIONS : This study shows that the uses of RP is better fitted to the accident data since each observations'specific characteristics could be considered. Thus, the methods which could consider the heterogeneity of data is recommended to analyze the relationship between accidents and affecting factors(for example, traffic safety facilities or geometrics in signalized 4-legged intersections).

• Journal of the Korean Geographical Society
• /
• v.45 no.5
• /
• pp.647-668
• /
• 2010

As well as "Sangyeongpyo," "Gogyeong-Jeongripyo," table of national road transportation system is important to comprehend identity of national geography in Joseon era even if it had not been researched yet. The aim of this study is to divide type of these tables and find its genealogy through mainly analyzing the road network and land names. As the result of this research, "Yeojigo," topographical researches of Korea, edited by Shin Gyeong-Jun as a palt of "Dongguk-Munheonbigo" official book in natural history of the Joseon Dynasty published in 1770, might be identified as the origin for all copy of "Gogyeong-Jeongripyo." Then "Gogyeong-Jeongripyo," can be divided into at least three major types; almost direct descent of "Yeoji go" as 'type1', minor modification as 'type2', and hybrid edition(type3) with second type that quoted many land names as route information from "Dorogo," another topography specialized for road transportation. Since "Dorogo" was also composed by Shin, after all, all genealogy of "Gogyeong-Jeongripyo" came from him.

• International Journal of Highway Engineering
• /
• v.20 no.2
• /
• pp.119-126
• /
• 2018

PURPOSES : The purpose of this study is to develop a crash prediction model at signalized intersections, which can capture the randomness and uncertainty of traffic accident forecasting in order to provide more precise results. METHODS : The authors propose a random parameter (RP) approach to overcome the limitation of the Count model that cannot consider the heterogeneity of the assigned locations or road sections. For the model's development, 55 intersections located in the Daejeon metropolitan area were selected as the scope of the study, and panel data such as the number of crashes, traffic volume, and intersection geometry at each intersection were collected for the analysis. RESULTS : Based on the results of the RP negative binomial crash prediction model developed in this study, it was found that the independent variables such as the log form of average annual traffic volume, presence or absence of left-turn lanes on major roads, presence or absence of right-turn lanes on minor roads, and the number of crosswalks were statistically significant random parameters, and this showed that the variables have a heterogeneous influence on individual intersections. CONCLUSIONS : It was found that the RP model had a better fit to the data than the fixed parameters (FP) model since the RP model reflects the heterogeneity of the individual observations and captures the inconsistent and biased effects.

• Journal of Korean Society of Transportation
• /
• v.19 no.1
• /
• pp.53-61
• /
• 2001

This study shows that a functional order relationship of national highways in rural areas, which provides the functional system as a principal and minor arterial highways, can be established by the use of statististics. As a result, the adequate functional design criteria of those highways are proposed on the basis of the traffic characteristics in those areas. According to those statistical studies, a function of national highways in the national road network is proved to form three categories broadly. Especially, the survey results based on the traffic characteristics on each road sections show that the initially constructed national highways can not provide an adequate functional role as the arterial highways in the studied areas. In order to operate the intended national highways functionally as the arterial highways, the functional design criteria of highways and the standard order of highway facilities based on the design traffic speed should be considered as an alternative.

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.161-170
• /
• 2008

This study deals with the accident models by vehicle type. The goal is to develop the accident models by vehicle type using the data of 143 4-legged signalized intersections in Cheongju. In pursuing the above, this study gives the particular attentions to explaining the relationships between the values of EPDO(equivalent property damage only) and the traffic and geometric elements. The main results analyzed are the followings. First, 6 negative binomial models are developed, which are all significant at the 90% confidence level. Second, the values of ${\rho}^2$ by vehicle type are 0.14307(auto), 0.35556(large van), 0.21684(small van), 0.205152(motocycle), 0.32338(light-duty truck) and 0.29046(heavy-duty truck), that are all analyzed to be statistically significant. Finally, the common variable included in all models is ADT(average daily traffic), and the specific variable(SV) of auto is analyzed to be the sum of lane width of main road, SV of large van is the average yellow time, and SV of small van is the difference in the number of lane between main and minor road.

• Journal of the Korean Society of Industry Convergence
• /
• v.12 no.3
• /
• pp.129-135
• /
• 2009

This paper describes traveling systems consisting of one major-wheel and three minor-wheels attached to each tip of three spokes. A link of inter-axle plays an important role of the system. It connects secondary axle to the major wheel axle. Its length is determined to ascend stably various stairs. The systems was designed to mount a cart for carrying agricultural products. The systems was applied to ascend stairs, travel on sand and cross a obstacle, despite of simple design.