• 제목/요약/키워드: Mineral Extraction

검색결과 313건 처리시간 0.026초

PC88A를 함유한 추출레진의 추출 특성 (Extraction characteristics of extraction resins containing PC88A)

  • 박계성;이진영;윤호성;김철주;엄형춘;김준수
    • 한국자원리싸이클링학회:학술대회논문집
    • /
    • 한국자원리싸이클링학회 2005년도 추계정기총회 및 제26회 학술발표대회 고분자리싸이클링기술 특별심포지엄
    • /
    • pp.168-172
    • /
    • 2005
  • 동일한 추출제가 함유된 3종의 추출레진을 대상으로 중희토류인 Gd의 추출특성을 비교하였다. 실험조건은 $20^{\circ}C$에서 평형 pH, Gd 농도, 추출시간으로 하여 다음과 같은 결과를 얻었다. 추출레진에서 추출시간 5분이내에 $Gd^{3+}$ 이온이 90%이상 추출되며, 추출시간 30분 이후에 변화가 거의 없어 추출반응이 종결된 것으로 판단된다. 평형 pH. 2.2이하에서 분배비는 평형 pH에 대해 선형적으로 감소하였다. Freundlich's 흡착등온식을 도입하여 3종의 추출레진에 대해 적용해 본 결과 결정계수$(R^2)$ 0.95이상으로 나와, Freundlich's 흡착등온식에 부합됨을 알 수 있었다.

  • PDF

Production of High-purity Magnetite Nanoparticles from a Low-grade Iron Ore via Solvent Extraction

  • Suh, Yong Jae;Do, Thi May;Kil, Dae Sup;Jang, Hee Dong;Cho, Kuk
    • Korean Chemical Engineering Research
    • /
    • 제53권1호
    • /
    • pp.39-45
    • /
    • 2015
  • We produced magnetite nanoparticles (MNPs) and a Mg-rich solution as a nano-adsorbent and a coagulant for water treatment, respectively, using a low-grade iron ore. The ore was leached with aqueous hydrochloric acid and its impurities were removed by solvent extraction of the leachate using tri-n-butyl phosphate as an extractant. The content of Si and Mg, which inhibit the formation of MNPs, was reduced from 10.3 wt% and 15.5 wt% to 28.1 mg/L and < 1.4 mg/L, respectively. Consequently, the Fe content increased from 68.6 wt% to 99.8 wt%. The high-purity $Fe^{3+}$ solution recovered was used to prepare 5-15-nm MNPs by coprecipitation. The wastewater produced contained a large amount of $Mg^{2+}$ and can be used to precipitate struvite in sewage treatment. This process helps reduce the cost of both sewage and iron-orewastewater treatments, as well as in the economic production of the nano-adsorbent.

염산용액에서 Alamine336에 의한 염화 제1, 2구리의 용매추출 (Solvent Extraction of Cuprous and Cupric Chloride from Hydrochloric Acid Solutions by Alamine336)

  • 이만승;이진영
    • 대한금속재료학회지
    • /
    • 제47권5호
    • /
    • pp.297-303
    • /
    • 2009
  • Solvent extraction experiments of cupric and cuprous chloride with Alamine336 have been performed from HCl solution. In order to identify the solvent extraction reaction, distribution diagram of cupric and cuprous species with HCl concentration was obtained by considering complex formation reaction and the activity coefficient of solutes with Pitzer equation. Analysis of the solvent extraction data by graphical method together with the distribution diagram of copper indicated that solvent extraction reaction of copper with Alamine336 depends on HCl concentration. In strong HCl solution of 3 and 5 M, ${CuCl_4}^{2-}$ and ${CuCl_3}^{2-}$ took part in the solvent extraction reaction as Cu(II) and Cu(I), respectively. When HCl concentration was 1 M, ${CuCl_2}^-$ was extracted into the organic phase in the case of Cu(I) while adduct formation between $Cu^{2+}$ and Alamine336 was responsible for the solvent extraction reaction of Cu(II).

염산용액에서 Cyanex 572를 사용하여 [Sm]/[Pr, Nd] 분리를 위한 향류추출 공정변수 계산 (Calculation of Countercurrent Extraction Process for Separation of [Sm]/[Pr, Nd] in Hydrochloric Acid Solution using Cyanex 572)

  • 이주은;소홍일;장인환;안재우;김홍인;이진영
    • 자원리싸이클링
    • /
    • 제27권5호
    • /
    • pp.69-76
    • /
    • 2018
  • 추출제로 Cyanex 572를 사용하여 염산용액에서 [Sm]과 [Pr, Nd]그룹을 분리하기 위해 Xu Guangxian이 제시한 이론에 의하여 최적 향류 추출 공정 변수를 계산하고자 하였다. 기초실험으로부터, [Sm]/[Pr, Nd]의 두 그룹 최적 분리계수는 추출공정의 경우 pH 1.75에서 14.59, 세정공정에서는 0.01M HCl에서 14.61 이었다. [Sm]과 [Pr, Nd] 그룹분리에 필요한 공정 변수에 대해 계산을 하였다. 계산 결과 두 그룹의 희토류 분리에 필요한 총 추출 및 세정 단수는 11단이었으며, 최적추출비를 유지시키기 위해 필요한 원료용액, 추출용액 및 세정용액의 유량비는 0.1 M HCl을 사용하였을 경우 6.25 : 1.74 : 5.80 이었다.

Comparative Studies on Velvet Deer Antler and Ossified Deer Antler on the Contents of Bioactive Components and on the Bone Mineral Density Improving Activity for Oophorectomized Rat

  • Jo, Sung Jun;Kim, Jung Hwan;Kim, Jeung-Won;Choi, Hye Ok;Lee, Seung Hwan;Kim, Mu-Kang;Woo, Sun Hee;Han, Byung Hoon
    • Natural Product Sciences
    • /
    • 제19권4호
    • /
    • pp.303-310
    • /
    • 2013
  • Velvet deer antler (VDA) is well known oriental medicine claimed to have tonic activities as improving bone mineral density (BMD), immune-enhancing, rejuvenating and many other medicinal activities. Ossified deer antler (ODA) is bony product produced by over-calcification of deer antler due to late harvesting. The extraction efficiency of ODA by conventional boiling in water must be very poor due to bony nature, hence the reputations for the medicinal efficacies of ODA has been highly under-evaluated compared to that of VDA without any experimental evidences. Employing our new efficient water extraction process ($135^{\circ}C$), the extracts of ODA and VDA were analysed to compare the contents of bioactive components and the potencies of pharmacological activities. The results showed that; 1) The $135^{\circ}C$ extraction (autoclaving) of ODA gave highly increased amount of biomass, 120% more than the conventional extraction by 100-boiling, whereas the same treatment for VDA showed only 15% increased amount of biomass. 2) Feeding the ODA- or VDA-extracts to oophorectomized rats showed very potent BMD-recovering activity. 3) During the ossification of deer antler, the total collagen content was found to be increased by addition of type-1 to pre-existing type-2 collagen, but not replacement of type-2 to type-1 collagen. High titer of peptide hormones like growth hormone and IGF-1 were detected in the ODA- and VDA-extracts and also in the serum of ODA- or VDA-treated oophorectomized animals dose-dependently. Present experimental data will give a conclusion that folkloric poor reputations on ODA must be concerned only with poor extraction efficiency of conventional $100^{\circ}C$ water extraction and not based on the composition of bioactive substances of ODA.

Alamine 336을 이용한 염화네오디뮴 수용액으로부터 Fe 제거 (Iron Removal from Neodymium Chloride Solution with Alamine 336)

  • 엄형춘;이진영;김철주;손정수;윤호성
    • Korean Chemical Engineering Research
    • /
    • 제46권3호
    • /
    • pp.512-515
    • /
    • 2008
  • 본 연구는 염화네오디뮴 수용액으로부터 Fe 성분 제거를 위하여 Alamine 336을 이용한 Fe의 용매추출을 수행함에 있어서, Alamine 336의 농도, 염산 및 염소이온 농도에 따른 Fe 추출 특성 및 유기상으로 추출된 Fe의 탈거공정에 있어 상비와 탈거 용액의 염산 농도의 영향들을 고찰하였다. Alamine 336을 사용하여 Nd, Fe 혼합 용액으로부터 Fe 만을 선택적으로 추출할 수 있다는 것을 확인하였으며, 수상의 염산 및 염소이온 농도 증가에 의해 Fe의 추출율이 증가하였다. Fe가 추출된 Alamine 336을 증류수로 탈거할 경우 A/O비 4인 조건에서 99%의 Fe를 탈거할 수 있었으며, 탈거 용액의 염산 농도가 증가할수록 Fe 탈거율이 감소하였다.

강변 여과 취수 지역 퇴적물의 철 화학종 추출 특성 (Iron Extraction Characteristics of Sediment Samples from a River Bank Filtration Site)

  • 현성필;문희선;윤필선;김보아;하규철
    • 한국광물학회지
    • /
    • 제26권2호
    • /
    • pp.129-138
    • /
    • 2013
  • 최근 들어 안정된 수자원 확보를 위해 하천수를 강변의 충적층을 통과시켜 취수하는 강변 여과수 개발이 각광을 받고 있다. 지표수 및 지하수와 반응하는 주변 충적층 퇴적물에 존재하는 철은 강변 여과 후 양수정을 통해 얻어지는 지하수의 수질을 결정하는 데 매우 중요한 요소이다. 본 연구에서는 퇴적물-지하수-지표수의 상호 작용에 의한 철 화학종의 존재 변화를 알아보기 위해 창원시 대산면 낙동강변의 강변여과 부지에서 채취한 대수층 퇴적물 내에 존재하는 철 함유량을 퇴적물 심도 및 입자 크기에 따라 다양한 화학적 철 추출법을 통해 비교하였다. 실험 결과는 전체적으로 지표로부터 20 m 부근까지는 2가철 및 총 철 함량이 전체적으로 감소하다 20 m 깊이 이하에서는 증가하는 경향을 나타내었다. 이러한 결과는 육안으로 관찰되는 퇴적물 색깔이 지시하는 산화/환원 환경 특성과도 일치하였다. 한편, 퇴적물의 모래 부분보다 미사/점토 부분에서 추출법에 따라 2~10배의 철이 추출되었다. 그리고, 다양한 추출법 중 DCB 용액에 의해 가장 많은 철이 추출되었다. 이와 같은 다양한 철 분석법으로 추출되는 철 함량 특성은 퇴적물 내에서 철의 용해 및 침전을 결정짓는 심도에 따른 산화/환원 조건의 좋은 지시자로 활용될 수 있을 것으로 판단된다.

Cyanex 572를 사용하여 [Pr, Nd, Sm]/[La]분리에 대한 향류추출공정 설계 (Design of Counter current Extraction Process for the Separation of [Pr, Nd, Sm]/[La] using Cyanex 572)

  • 이주은;소홍일;장인환;안재우;김홍인;이진영
    • 자원리싸이클링
    • /
    • 제27권4호
    • /
    • pp.50-56
    • /
    • 2018
  • 추출제로 Cyanex 572를 사용하여 혼합 용액에서 [Pr, Nd, Sm]그룹과 [La]을 분리하기 위하여 Xu Guangxian이 제시한 이론에 의하여 향류추출 공정의 최적 추출 공정 변수를 계산하고자 하였다. 기초실험으로부터 두 그룹의 최적 분리계수는 추출 공정의 경우 16.80, 세정공정에서는 21.48 이었고, 1.0 M Cyanex 572에 의한 희토류 성분의 추출용량은 0.12 M 이었다. 공정 개발에 필요한 추출 단수, 세정 단수, 유량비 등에 대하여 최적 추출비 이론에 의해 계산하였다. 계산 결과 두 그룹의 희토류 분리에 필요한 단수는 추출 7단 및 세정 4단이며, 원료용액, 추출용액 및 세정용액의 유량비는 25 : 5.67 : 12.27 이었다.

국내산 규조토의 수열반응에 의한 Kaolinite질 인공점토의 합성에 관한 연구 (The Synthesis of Kaolinitic Clay Minerals from Domestic Diatomite by Hydrothermal Process)

  • 김남일;박계혁;정창주
    • 한국세라믹학회지
    • /
    • 제31권11호
    • /
    • pp.1401-1413
    • /
    • 1994
  • The synthesis of kaolinite mineral from domestic diatomite for silica resource, commercial vailable gibbsite or alumina for alumina resource were made under various hydrothermal treatment, and the sythetic effect of acidic mineralizers, temperature treatment with time duration, particle size of alumina on formation of kaolinite mineral and the plastic properties of synthesized kaolinite were investigated. The various acidic mineralizers which are HCl, HNO3, H2SO4 and Oxalic acid were employed for hydrothermal reaction in the range of 0.01 mol/ι to 2 mol/ι concentration of each mineralizers. It was found that HCl in the level of 1 mol/ι solution produced highly yields of well-crystallized and platy form kaolinite mineral and gave the most effective extraction of iron oxide, compared to that of others, that HNO3 produced highly yield of kaolinite but lower extraction of iron oxide, that H2SO4 produced low yield of kaolinite and formed alunite mineral, and that oxialic acid formed spherical crystalline kaolinite and gave low extraction of iron oxide. Moreover, it showed that kaolinite minerals were well synthesized in a wide range of less than 2 mol/ι acids, but were poorly synthesized at more than 2 mol/ι acids. However, boehmite and kaolinite were coexistently formed in the temperature range of 18$0^{\circ}C$ and 20$0^{\circ}C$ when the calcined diatomite and gibbsite were involved. The well-ordered kaolinite mineral as a platy form was highly synthesized in the temperature range of 220 and 24$0^{\circ}C$, when the same marterials as above were used with treatment of 1 mol/ι HCl solution. The results also revealed that the size of crystalline platy form kaolinite, synthesized from alumina and calcined diatomite with treatment in 1 mol/ιHCl solution at 24$0^{\circ}C$, was much larger than that of gibbsite and calcined diatomite shown previously, and that kaolinite and corundum minerals were coexistently formed under any hydrothermal treatment conditions. The plasticity of synthesized kaolinite from under 2 ${\mu}{\textrm}{m}$ alumina and calcined diatomite was very poor, and that of the synthesized kaolinite from raw diatomite and gibbsite gave higher than that of calcined diatomite and gibbsite.

  • PDF