• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.391-394
• /
• 1999

The diamond thin films are deposited on silicon using MPCVD(Microwave Plasma Chemical Vapor Deposition) method at various deposition microwave power and time. Diamond is deposited with 100 sccm H$_2$ and 2 sccm CH$_4$ by MPCVD. The crystallinity of diamond thin films were increased with increase of microwave power. The growth rate of diamond thin films were increased with increase of time.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.121.1-121.1
• /
• 2014

Recently, much attention has been given to plasma production under liquid and its applications [1]. However, most of plasma production techniques reported so far utilize high voltage dc, ac, rf or microwave power [2], where damage to discharge electrodes and small discharge volume are remained issues. As an alternative of plasma production method under liquid, we have proposed pulsed microwave excited plasma using slot antenna, where damage to the slot electrode can be minimized and plasma volume can be increased. We have also reported improvement of treatment efficiency with use of reduced-pressure condition during the discharge [3]. To realize low pressure conditions in liquid, various alternative technique can be considered. One possible technique is simultaneous injection of microwave power and ultrasonic wave. Ultrasonic wave induces pressure fluctuation with the wave propagation and is so far used for cavitation production in the water. We propose utilization of reduced pressure induced by ultrasonic cavitation for improvement of the plasma production. Correlation between the plasma production and the ultrasonic power will be discussed.

• Journal of the Korean Chemical Society
• /
• v.55 no.6
• /
• pp.983-987
• /
• 2011

Surveys on the process of extracting acid from dried rinds of Garcinia oblongifolia Champ. ex Benth (G. oblongifolia) using microwave in terms of time, machine power and solid/liquid rate, have resulted in such findings as: the best time allocation for extracting is 25 minutes; machine power works best at level 2 (microwave power is 400 W); suitable rate of solid/liquid is 0.071 (approximately 150 mL solvent per 10 g of sample). The total amounts acid and (-)-hydroxycitric acid extracted from 100 g dried rinds of G. oblongifolia are 18.592 g and 10.137g respectively. This is the first finding on extraction of (-)-HCA from dried rinds of G. oblongifolia using microwave.

• Journal of Nutrition and Health
• /
• v.22 no.3
• /
• pp.159-166
• /
• 1989

The effect of blanching time and power settings of microwave oven on the ascorbic acid retention in seven kinds of vegetables were investigated. The vegetable were blanched for 120 or 180 sec. at three different power setting, 650 watt(high power), 500 watt(medium power) and 160 watt(low power). The retentions of ascorbic acid in cabbage, garland chrysanthemum, mungbean sprout, amaranth and carrot were higher when they were blanched at the high power than those blanced at the lower power stettings. Blanching of spinach and yul-moo(small korean radish) showed that the vitamin was more retained by the medium power heating. Blanching at the low power revealed that the ascorbic acid retention was reduced remarkably as the blanching time increased. From the scoring difference tests the 10-panel members indicated that the texture of three-tested vegetables was more acceptable when they were blanched at the high power setting.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.1
• /
• pp.90-94
• /
• 2013

A low loss power dividing switch in a indoor microwave power distribution system is proposed and designed with a various power dividing ratio. Switching characteristics are analyzed by use of the S-parameter of the switch. Newly proposed switch showed a very low return loss less than -30dB at the operating frequency of 2.45GHz. Three kinds of the switch in which we take out individually 1/2, 1/3 and 1/4 of the input power were fabricated, and measured the delivered, transmitted, and return loss power ratio. Simulated results showed that the lower power ratio is, the better accurate operating performance shows. This switch can switch the input power from 4.5% to 58% with the variance of 5% output power. The experimental results are in good agreement with the simulation within the return loss of 1%.

• Korean Journal of Food Science and Technology
• /
• v.40 no.5
• /
• pp.510-515
• /
• 2008

Microwave energy was applied to the extraction of functional catechins from grape seed. The solvent, absolute ethanol, reached the boiling point when exposed for less than 3 min microwave treatment at 100 W. The effects of independent variables in microwave-assisted extraction (MAE), including microwave power (0-160W, $X_1$), ethanol concentration (0-100%, $X_2$) and extraction time (1-5 min, $X_3$), were investigated on each response variable ($Y_n$), and the contents of catechin and its derivatives were determined via response surface methodology, thereby allowing us to predict their optimal extraction conditions. The predicted maximal values of (+)-catechin, procyanidin $B_2$, (-)-epicatechin, and (-)-epicatechin gallate were 137.99, 72.78, 222.38, and 9.59 mg%, respectively, under different MAE conditions. The predicted extraction conditions for maximum catechin responses were as follows: 104.10 W of microwave power, 45.35% of EtOH, and 4.89 min of extraction time for (+)-catechin (137.99 mg%), 133.16 W, 46.16% and 4.49 min for procyanidin $B_2$ (72.78 mg%), 136.00 W, 41.37% and 4.39 min for (-)-epicatechin (222.38 mg%), 143.20 W, 37.51% and 1.88 min for (-)-epicatechin gallate (9.59 mg%), respectively. The contents of (+)-catechin, procyanidin 1B2 and (-)-epicatechin in MAE were similarly influenced by three independent variables, whereas (-)-epicatechin gallate was influenced less profoundly by ethanol concentration and extraction time.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.268-268
• /
• 2012

Atmospheric pressure microwave induced plasmas are used to excite and ionize chemical species for elemental analysis, for plasma reforming, and for plasma surface treatment. Microwave plasma differs significantly from other plasmas and has several interesting properties. For example, the electron density is higher in microwave plasma than in radio-frequency (RF) or direct current (DC) plasma. Several types of radical species with high density are generated under high electron density, so the reactivity of microwave plasma is expected to be very high [1]. Therefore, useful applications of atmospheric pressure microwave plasmas are expected. The surface characteristics of SUS304 stainless steel are investigated before and after surface modification by microwave plasma under atmospheric pressure conditions. The plasma device was operated by power sources with microwave frequency. We used a device based on a coaxial transmission line resonator (CTLR). The atmospheric pressure plasma jet (APPJ) in the case of microwave frequency (880 MHz) used Ar as plasma gas [2]. Typical microwave Pw was 3-10 W. To determine the optimal processing conditions, the surface treatment experiments were performed using various values of Pw (3-10 W), treatment time (5-120 s), and ratios of mixture gas (hydrogen peroxide). Torch-to-sample distance was fixed at the plasma edge point. Plasma treatment of a stainless steel plate significantly affected the wettability, contact angle (CA), and free energy (mJ/$m^2$) of the SUS304 surface. CA and ${\gamma}$ were analyzed. The optimal surface modification parameters to modify were a power of 10 W, a treatment time of 45 s, and a hydrogen peroxide content of 0.6 wt% [3]. Under these processing conditions, a CA of just $9.8^{\circ}$ was obtained. As CA decreased, wettability increased; i.e. the surface changed from hydrophobic to hydrophilic. From these results, 10 W power and 45 s treatment time are the best values to minimize CA and maximize ${\gamma}$.

• Food Science and Biotechnology
• /
• v.17 no.2
• /
• pp.379-383
• /
• 2008

Extraction characteristics of garlic and functional properties of corresponding extract were monitored by response surface methodology (RSM). Maximum extraction yield of 26.41% was obtained at microwave power of 146.29 W, ethanol concentration of 63.31 %, and extraction time of 5.88 min. At microwave power, ethanol concentration, and extraction time of 114.84 W, 58.83%, and 1.42 min, respectively, maximum electron-donating ability (EDA) was 72.86%. Maximum nitrite-scavenging ability was 94.62% at microwave power, ethanol concentration, and extraction time of 81.83 W, 2.65%, and 3.83 min, respectively. Superoxide dismutase (SOD) showed maximum pseudo-activity of 49.12% at microwave power of 34.23 W, ethanol concentration of 33.11 %, and extraction time of 4.40 min. Based on superimposition of 4-dimensional RSM with respect to extraction yield, electron-donating ability, nitrite-scavenging ability, and pseudo-activity of SOD, optimum ranges of extraction conditions were microwave power of 0-100 W, ethanol concentration of 40-70%, and extraction time of 2-8 min.

• Food Science and Biotechnology
• /
• v.16 no.2
• /
• pp.299-305
• /
• 2007

Response surface methodology was employed to optimize extraction conditions for finding the maximal functional properties of Pleurotus eryngii. Based on central composite design, the study plan was established with variations of microwave power (30-150 W), ethanol concentration (0-99.9%), and extraction time (1-9 min). Regression analysis was applied to obtain a mathematical model. A maximal yield of 47.86% was obtained when the microwave power, ethanol concentration, and extraction time were set at 122.7 W, 42.14%, and 8.3 min, respectively. A maximized electron donating ability of 93.32% was found under the following conditions: a microwave power of 144.19 W, an ethanol concentration of 49.52%, and an extraction time of 6.7 min. When the microwave power, ethanol concentration, and extraction time were set at 125.43 W, 40.54%, and 8.1 min, respectively, the maximum nitrite-scavenging ability was 80.47%. The optimum ranges of the extraction conditions, superimposed by the response surface methodology, could predicate a microwave power of 110-150 W, ethanol concentration of 0-45%, and extraction time of 7-9 min.

• Food Science of Animal Resources
• /
• v.29 no.1
• /
• pp.82-90
• /
• 2009

This study was carried out to evaluate the effects of microwave power level on cooking properties of ground pork patties (fat level: 20%). Each patty was cooked from a thawed state to $76.7^{\circ}C$ (center temperature) in a microwave oven with power levels of 40% (360 W), 60% (540 W), 80% (720 W), and 100% (full power, 900 W), respectively. Cooking rate increased with power level, and the non-uniformity also increased with time during cooking. Overheating at the edge of the patties was observed for all power levels, and maximum temperature differences in between the edge position and center position were found in patties cooked at the 900 W power level. Compositional properties, total cooking loss, and drip loss were not affected by power level, although moisture content was lower at the edge than at the center position. As the power level increased, the reduction in patty diameter of cooked patties increased while the reduction in patty thickness decreased. Pork patties cooked at lower power levels (360 W and 540 W) had higher shear force values than those cooked at higher power levels (720 W and 900 W). Few changes were observed in instrumental color values.