• 대한본초학회지
• /
• 제22권4호
• /
• pp.253-260
• /
• 2007

Objectives : Intracerebral hemorrhage (ICH) is characterized by breakdown of blood vessels within the brain parenchyma. Fundamental therapeutic strategies for ICH, particularly those aimed at neuroprotection, have to be established. So in this experiment, the effects of Woowhangchongshim-won, a traditional prescription formula for treating Cerebral Apoplexy in Asian countries, were investigated. Methods : After intraperitoneal injection of chloralhydrate, rats were placed in a stereotaxic frame. ICH was induced by injection of 1 U collagenase type IV and drug was administered orally for 10 days. The molecular profile of cerebral hemorrhage in rat brain tissue was measured using micro array technique to identify up- or down- regulated genes in brain tissue. These genes induced by brain damage were mainly concerned with general metabolic process such as primary metabolic process, cellular metabolic process, macromolecule metabolic process, and biosynthetic process. Results : The number of genes increased in control and not-changed in experiment was 374, and decreased in control and not-changed in experiment was 527. We are concerned with genes that can be recovered by treatment with medicine, it is especially interesting to above types of genes. Conclusions : Upon medicine treatment to the rat having cerebral hemorrhage, expressions of some genes were restored to normal level. Further analysis using protein interaction database identified some key molecules that can be used for elucidation of therapeutical mechanism of medicine in future.

• Clinical and Experimental Reproductive Medicine
• /
• 제25권3호
• /
• pp.251-260
• /
• 1998

It is well known that the clinical test for responsibility of accurate fertilization capacity in male partners is very important to diagnose and treat the infertility. However, it has been reported that the traditional semen analysis cannot accurately predict fertilization and pregnancy potential. The present study was performed to evaluate the acrosomal reaction to ionophore challenge (ARIC) test as a prognostic indicator for fertilization of sperm and oocyte in an in vitro fertilization and embryo transfer (IVF-ET) program. From March 1996 to Februry 1997, 30 couples undergoing IVF program were allocated to this study group. All female partners in the study group were 35 years old or less and their serum level of basal follicle stimulating hormone (FSH) and estradiol $(E_2)$ were normal. All the male partners have normal parameters of semen analysis. The ARIC tests were performed on the day of ovum pick up and in vitro insemination in all the male partners. The controlled ovarian hyperstimulation (COH) using luteal long protocol of gonadotropin releasing hormone (GnRH) agonist was used in all couples for IVF-ET. The acrosomal reaction with $10{\mu}l$ of 10% DMSO was induced spontaneously in $10.1{\pm}9.8%$, and acrosomal reaction with calcium ionophore A 23187 was induced in $27.4{\pm}18.1%$, and the ARIC value was $17.4{\pm}16.2%$. There were no significant correlation between the ARIC value and the fertilization rate ($r^2$=0.044, p=0.268). There were also no significant correlation between the ARIC value and the percentage of the grade I, II embryos ($r^2$=0.046, p=0.261). On the basis of above results, it was suggested that ARIC test might not be a useful prognostic indicator for fertilization in IVF-ET in male partners with normal parameters of conventional semen analysis. We guessed that IVF-ET could be performed to the patients primarily without universal appilcation of ARIC test to all male partenrs, and if fertilization failure occurs, the micro assisted fertilization (MAF) such as intracytoplsmic sperm injection (ICSI) might be used as an alternative mode of treatment with acceptable success rate.

• 한국방사선학회논문지
• /
• 제12권6호
• /
• pp.777-783
• /
• 2018

고무화합물 형태로 구성된 조영제의 병에 Syringe Connector의 Spike를 연결 시 고무의 찢김 정도를 알아 보고 찢김 및 분쇄로 인한 합성고무의 혼입 유무와 분쇄된 합성고무가 검출 시 분쇄물의 크기를 실험을 통해 알아보고자 하였다. 그 결과 찢김 정도의 경우 Syringe Connector의 끝과 최초 접촉하는 앞면이 약 $3.14{\pm}0.04mm$로 뒷면 보다 많이 찢겼으며, 실험 대상인 10 병의 조영제에서 평균 7 개에서 15 개로 모두 분쇄물이 검출되었다. 검출된 분쇄물을 이용하여 크기를 측정한 결과 평균크기는 약 $7.89{\pm}0.31{\mu}m$이었다. 향 후 다양한 실험 및 분석방법을 통한 추가실험과 더불어 흡인된 분쇄물 차단을 위한 미세 필터타입 자동주입장치의 개발이 필요하며, 분쇄물 유입 시 치명적 사고를 대비하여 관련기관의 관심 또한 필요할 것으로 사료된다.

• 한국지반환경공학회 논문집
• /
• 제22권12호
• /
• pp.15-24
• /
• 2021

대부분이 산악지역인 국내에서는 터널 및 지하공간개발의 비중이 점점 높아지고 있다. 지하공간개발 시 지반 개량공법을 적용하여 지반을 보강하지만 국내에서는 여전히 사건 사고가 빈번하게 발생하고 있다. 대표적인 지반 보강공법인 그라우팅 공법은 주입재의 총량과 실제 그라우팅 시공 시 사용한 주입재의 양을 비교하여 효과를 판정하였으며, 혹은 그라우팅 공법을 적용한 지반에 보링 후 시료의 일축압축강도 평가 혹은 현장 투수시험을 통하여 지반 보강여부를 판단하였다. 하지만, 시공 중 혹은 대상 지반 내에 지반 보강이 제대로 이루어졌는지는 판단하기는 어렵다. 이러한 문제를 해결하기 위해 전도성 재료인 탄소섬유와 그라우트 재료인 마이크로시멘트를 혼합하여 그라우팅을 수행한 후 전기비저항 측정을 통해 시공 중이나 시공 후에 품질관리가 가능한 새로운 방법에 대해 연구가 필요한 실정이다. 본 연구는 이에 대한 기초연구로 전도성 재료인 탄소섬유가 혼합된 그라우트 재의 성능을 평가하기 위해 탄소섬유 0%, 3%, 5%, 7%로 혼합된 시멘트 공시체를 제작하였으며, 제작한 공시체에 대하여 3일, 7일, 28일 습도 99%의 조건으로 습윤양생 시킨 후 압축파 속도 및 전단파 속도 측정을 수행하였다. 압축파 속도 및 전단파 속도 측정 결과 탄소섬유의 배합비 및 재령일수 증가에 따라 증가하는 경향을 보였으며, 재료의 강성인 탄성계수 및 전단탄성계수도 증가하는 것을 확인하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.1-2
• /
• 2011

Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.180-180
• /
• 2012

Heteroepitaxial GaN nano- and micro-rods (NMRs) are one of the most promising structures for high performance optoelectronic devices such as light emitting diodes, lasers, solar cells integrated with Si-based electric circuits due to their low dislocation density and high surface to volume ratio. However, heteroepitaxial GaN NMRs growth using a metal-organic vapor phase epitaxy (MOVPE) machine is not easy due to their long surface diffusion length at high growth temperature of MOVPE above $1000^{\circ}C$. Recently some research groups reported the fabrication of the heteroepitaxial GaN NMRs by using MOVPE with vapor-liquid-solid (VLS) technique assisted by metal catalyst. However, in the case of the VLS technique, metal catalysts may act as impurities, and the GaN NMRs produced in this mathod have poor directionallity. We have successfully grown the vertically well aligned GaN NMRs on Si (111) substrate by means of self-catalystic growth methods with pulsed-flow injection of precursors. To grow the GaN NMRs with high aspect ratio, we veried the growth conditions such as the growth temperature, reactor pressure, and V/III molar ratio. We confirmed that the surface morphology of GaN was strongly influenced by the surface diffusion of Ga and N adatoms related to the surrounding environment during growth, and we carried out theoretical studies about the relation between the reactor pressure and the growth rate of GaN NMRs. From these results, we successfully explained the growth mechanism of catalyst-free and mask-free heteroepitaxial GaN NMRs on Si (111) substrates. Detailed experimental results will be discussed.

• 대한환경공학회지
• /
• 제27권10호
• /
• pp.1081-1089
• /
• 2005

본 연구에서는 기존에 중유를 사용하는 상용보일러에서 오리멀젼 연료의 활용 가능성을 평가하기 위하여 소형 보일러에서 오리멀젼 연료의 기본적인 연소특성을 실험과 더불어 수치해석하였다. 오리멀젼의 주요 연소특성은 최고 화염온도가 버너로부터 $20{\sim}30\;cm 뒤쪽에 나타나는 화염지연현상과 비교적 넓게 분포하는 화염의 형태로 이는 오리멀젼 제조과정에서 포함된 높은 수분함량과 미세한 수부액적으로 이한 미소폭발 현상에 기인한다. 오리멀젼 연료의 연소특성에 미치는 영향을 평가하기 위하여 연료공급량, 무화유체의 종류, 그리고 계산에 사용된 현상학적인 복사모델과 같은 중요한 설계 및 운전인자에 대한 일련의 변수연구를 수행하였다. 연소특성인 최고 화염온도 지연현상은 연료공급 속도를 조절함으로써 어느 정도 저감시킬 수 있었으며 연소생성물로 CO와 $SO_2$ 그리고 NO가스의 연소로 내 발생특성을 평가하였다. 또한 무화용 유체로 증기를 사용하였을 경우 로내 연소상태는 무화용 공기에 비해 안정화 되고 고온영역이 감소되는 결과를 보였다. 일반적으로 본 연구에서 수행한 실험조건에 대한 수치해석 결과는 물리적으로 일관성 있는 결과를 제시하였으나 오염물질 생성농도에 대한 보다 정확한 예측을 위해서는 추후 현상학적인 모델개선을 필요로 한다. 결국 본 연구로부터 개발된 컴퓨터 프로그램은 기존의 상용화 중유 보일러에서 오리멀젼 연료로 대체 사용시 개선사항 및 유용한 운전 자료를 제공할 것으로 판단된다.

• 한국대기환경학회지
• /
• 제23권5호
• /
• pp.547-556
• /
• 2007

The release, sampling and analytical methods have been developed and tested for perfluorocarbons (PFCs) atmospheric tracers in order to gain insight into the atmospheric transport and dispersion over the urban conditions of Seoul, Korea. Although PFCs tracer experiments provide unique opportunities to test local and urban scale of transport and dispersion, no previous experiment with PFCs has been conducted in Korea. PMCH and PDCH were chosen as targeted tracers in our study due to their extreme low ambient concentrations and great sensitivities among various PFCs. For PFCs release system, a set of micro-metering pump, electronic balance, vaporizing furnace and high speed blower was constructed for precise and accurate release of tracers. The precision of released rate by this system was estimated to be 1%. Samplings of PFCs were carried out by fabricated portable air samplers with micro pumps and rotameters into glass tubes packed with 150 mg of Carboxen-569. The uncertainty of these sampling system was maintained below 14%. PMCH and PDCH were quantified in GC/ECD with preconditioned injection system to eliminate the interference compounds using traps and subsequent catalytic conversion system prior to column separation. Three intensive field test were undertaken during the springtime of 2002 to 2004 in eastern part of Seoul. Daily background samples were collected to characterize the background levels of PMCH and PDCH prior to their release. The observed background concentrations of PMCH ranged from 3.5 to 10.1 fL/L and varied randomly in location and time in this study. Its mean and standard variation of background concentration ($6.8{\pm}1.9\;fL/L$) are higher than those ($3.2{\sim}5.8\;fL/L$) of other historic tracer studies. Identified uncertainty for background PMCH was $1.7{\sim}2.0\;fL/L$ using this analytical system. Combined relative uncertainty in determining the tracer's concentrations was estimated as 17%. However, its background concentrations and uncertainty in concentration determination were found to be low and stable enough for tracer study.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.81.2-81.2
• /
• 2012

To fabricate a metal mold for injection molding, hot-embossing and imprinting process, mechanical machining, electro discharge machining (EDM), electrochemical machining (ECM), laser process and wet etching ($FeCl_3$ process) have been widely used. However it is hard to get precise structure with these processes. Electrochemical etching has been also employed to fabricate a micro structure in metal mold. A through mask electrochemical micro machining (TMEMM) is one of the electrochemical etching processes which can obtain finely precise structure. In this process, many parameters such as current density, process time, temperature of electrolyte and distance between electrodes should be controlled. Therefore, it is difficult to predict the result because it has low reliability and reproducibility. To improve it, we investigated this process numerically and experimentally. To search the relation between processing parameters and the results, we used finite element simulation and the commercial finite element method (FEM) software ANSYS was used to analyze the electric field. In this study, it was supposed that the anodic dissolution process is predicted depending on the current density which is one of major parameters with finite element method. In experiment, we used stainless steel (SS304) substrate with various sized square and circular array patterns as an anode and copper (Cu) plate as a cathode. A mixture of $H_2SO_4$, $H_3PO_4$ and DIW was used as an electrolyte. After electrochemical etching process, we compared the results of experiment and simulation. As a result, we got the current distribution in the electrolyte and line profile of current density of the patterns from simulation. And etching profile and surface morphologies were characterized by 3D-profiler(${\mu}$-surf, Nanofocus, Germany) and FE-SEM(S-4800, Hitachi, Japan) measurement. From comparison of these data, it was confirmed that current distribution and line profile of the patterns from simulation are similar to surface morphology and etching profile of the sample from the process, respectively. Then we concluded that current density is more concentrated at the edge of pattern and the depth of etched area is proportional to current density.

• Nuclear Medicine and Molecular Imaging
• /
• 제40권1호
• /
• pp.40-47
• /
• 2006

목적 : 이 연구에서는 고양이 뇌 PET 영상을 감쇠, 산란 보정 후 정량 평가하여 감쇠, 산란보정의 필요성에 대하여 연구하였다. 대상 및 방법 : 감쇠, 산란보정의 영향을 평가하기 위하여 microPET R4 스캐너를 이용하여 팬텀과 5마리 고양이의 $^{18}F$-FDG PET 스캔을 얻었다. $^{68}Ge$ 선원을 이용하여 30분 동안 투과영상을 얻은 후 FDG를 정맥주사한 다음 방출 영상을 얻었다. PET 영상은 OSEM을 이용하여 영상을 재구성하였고, 감쇠, 산란보정을 하였다. 전두엽, 두정엽 외측 측두엽 등을 포함하는 대뇌피질 영역과 꼬리핵머리, 조가비핵, 시상을 포함하는 심부피질 영역에 관심영역을 그린 다음 감쇠, 산란보정 전, 후의 계수를 측정하였다. 각각의 계수는 방사선원 투여량과 중량으로 정규화하였다. 감쇠보정의 영향을 평가하기 위하여 "심부피질/대뇌피질"의 비를 계산하였다. 산란보정의 영향을 평가하기 위하여 회백질과 백질에 관심영역을 그린 다음 "(회백질-백질)/회백질"의 비를 구하여 대조도를 계산하였다. 결과: 감쇠보정 후, "심부피질/대뇌피질"의 비는 $17{\pm}7%$ 증가하였다. 산란보정 후, "(회백질-백질)/회백질"의 비는 $12{\pm}3%$ 증가하였다. 결론: 감쇠보정 후 "심부피질/대뇌피질"의 계수비가 증가하였고, 산란보정 후 회백질과 백질 사이의 대조도가 증가하였다. 이는 고양이 뇌 PET 영상 획득 및 정량화를 할 때 감쇠보정이 특히 중요함을 반영한다.