• Journal of Electrical Engineering and information Science
• /
• v.2 no.3
• /
• pp.71-76
• /
• 1997

A lot of experiments and analyses have been done to determine the aging mechanism of mica-epoxy composite material used for large generator stator windings in order to estimate remaining life of the generator for last decades. After degrading artificially the mica-epoxy composite material, the surface analysis is performed to analyze breakdown mechanism of insulation in air and hydrogen atmosphere; i) In the case of air atmosphere, it is observed that an aging propagation from conductor to core by partial discharge effect and the formation of cracks between layers is widely carbonized surface. ii) In case of hydrogen atmosphere, the partial discharge effect is reduced by the hydrogen pressure (4kg/$\textrm{cm}^2$). Potassium ions forming a sheet of mica is replaced by hydrogen ions, which can lead to microcracks. It is confirmed that the sizes of crack by SEM analysis are 10∼20[$\mu\textrm{m}$] in length under air, and 1∼5[$\mu\textrm{m}$] in diameter, 10∼50[$\mu\textrm{m}$] in length under hydrogen atmosphere respectively. The breakdown mechanism of sttor winding insulation materials which are composed of mica-epoxy is analyzed by the component of materials with EDS, SEM techniques. We concluded that the postassium ions of mica components are replaced by H\ulcorner, H$_3$O\ulcorner at boundary area of mica-epoxy and/or mica-mica. It is proposed that through these phenomena, the conductive layers of potassium enable creation of voids and cracks due to thermal, mechanical, electrical and environmental stresses.

• Current Applied Physics
• /
• v.18 no.12
• /
• pp.1486-1491
• /
• 2018

In recent years, mica has been successfully used as a substrate for the growth of flexible epitaxial ferroelectric oxide thin films. Here, we systematically investigated the flexibility of mica in terms of its thickness, repeated bending/unbending, extremely hot/cold conditions, and successive thermal cycling. A $20-{\mu}m-thick$ sheet of mica is flexible even up to the bending radius of 5 mm, and it is durable for 20,000 cycles of up- and down-bending. In addition, the mica shows flexibility at 10 and 773 K, and thermal cycling stability for the temperature variation of ca. 400 K. Compared with the widely used flexible polyimide, mica has a significantly higher Young's modulus (ca. 5.4 GPa) and negligible hysteresis in the force-displacement curve. These results show that mica should be a suitable substrate for piezoelectric energy-harvesting applications of ferroelectric oxide thin films at extremely low and high temperatures.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.4
• /
• pp.1715-1717
• /
• 2014

The overall incidence and mortality of renal cell carcinoma (RCC), the most common kidney cancer, are steadily increasing for reasons that are not fully explained. Our aim was to explore the expression of membrane MHC class I chain-related gene A (mMICA) in human RCC cell lines and tissue specimens, and to determine expression of soluble MICA (sMICA) in serum of patients with renal cell carcinoma, we used flow cytometry (FCM) and immunohistochemistry as well as an enzyme linked immunosorbent assay (ELISA). The results showed that percentage of mMICA expression was significantly increased in human kidney cancer tissues and RCC cell lines (786-O and Ketr-3) than that in healthy adults and human embryonic kidney 293 (HEK293) cell line individuality (P<0.05). sMICA content in healthy adults was negative, but in renal cancer patients was significantly elevated (P<0.05). Our research showed that high expression of MICA in human kidney cancer, this results show that MICA might serve as potential tumor-associated antigen (TAA) in RCC.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.11b
• /
• pp.315-318
• /
• 2003

본 연구에서는 NaCl 용응법에 의해 fly ash로부터 합성된 swelling mica의 다양한 이온의 교환특성과 이온교환이 결정구조에 미치는 영향을 규명함으로서 swelling mica에 의한 유해 방사능 물질 및 중금속의 효과적인 제거제로서의 활용 가능성을 조사하고자 하였다. 1가 양이온이 흡착된 FA-swelling mica의 $d_{001}$/ peak의 강도는 흡착된 이온의 직경이 클수록 감소하는 경향을 나타내었으나, $d_{001}$/ value는 흡착된 이온의 직경과 뚜렷한 상관관계가 없었다. 또한 FA-swelling mica의 NH4 이온의 흡착량은 133 $cmol^{+}$/kg, K 이온은 127 $cmol^{+}$/kg, Li 이온은 23 $cmol^{+}$/kg으로서 방사성 물질과 중금속 이온에 비해 낮은 경향을 나타내었다. 2가 양이온이 흡착된 FA-swelling mica의 $d_{001}$/ peak 강도와 $d_{001}$/ value는 이온의 직경에 관계없이 비슷한 값을 나타내었으며 1가 양이온의 흡착에 비해 구조적 안정성이 높았다. Sr 및 Ba 이온의 흡착반응은 느리고 지속적으로 일어났으며 Ca와 Mg 같은 2가 양이온에 비해 선택성이 훨씬 높은 것으로 나타났다. 또한 Sr 및 Ba 이온과 같이 직경이 큰 방사성 원소들은 swelling mica의 층간에 흡착되어 결정구조가 부분적으로 붕괴됨으로서 이온을 비가역적으로 고정하는 특성을 나타내었다. Zn, Cu, Cd 및 Pb 등의 중금속 이온이 흡착된 FA-swelling mica의 $d_{001}$/ value는 12.70~12.80$\AA$으로서 매우 일정하였으며, 이온 흡착에 의한 층간 팽창정도는 이온의 크기뿐만 아니라 수화정도에 따라 상이하였다. FA-swelling mica의 중금속 이온의 흡착은 층간 붕괴에 의해 일어나는 것으로 판단되며, 선택성과 흡착능력은 층간 붕괴속도와 비례하는 경향을 나타내었다. 또한 FA-swelling mica의 중금속 이온의 선택성은 Pb>Cu>Cd$\geq$Zn 순으로 나타났다.

• Journal of Powder Materials
• /
• v.24 no.6
• /
• pp.457-463
• /
• 2017

Nanosized $Gd_2O_3:Eu^{3+}$ red phosphor is prepared using a template method from metal salt impregnated into a crystalline cellulose and is dispersed using a bead mill wet process. The driving force of the surface coating between $Gd_2O_3:Eu^{3+}$ and mica is induced by the Coulomb force. The red phosphor nanosol is effectively coated on mica flakes by the electrostatic interaction between positively charged $Gd_2O_3:Eu^{3+}$ and negatively charged mica above pH 6. To prepare $Gd_2O_3:Eu^{3+}$-coated mica ($Gd_2O_3:Eu/mica$), the coating conditions are optimized, including the stirring temperature, pH, calcination temperature, and coating amount (wt%) of $Gd_2O_3:Eu^{3+}$. In spite of the low luminescence of the $Gd_2O_3:Eu/mica$, the luminescent property is recovered after calcination above $600^{\circ}C$ and is enhanced by increasing the $Gd_2O_3:Eu^{3+}$ coating amount. The $Gd_2O_3:Eu/mica$ is characterized using X-ray diffraction, field emission scanning electron microscopy, zeta potential measurements, and fluorescence spectrometer analysis.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.4
• /
• pp.200-203
• /
• 2012

Epoxy/mica composite was synthesized, in order to use it as an impregnation resin in a vacuum pressure impregnation (VPI) process, for manufacturing a high voltage rotary machine. The average particle size of the mica was 5~7 ${\mu}m$ and its content was 0, 20, 30 and 40 wt%. A plasticizer or a low molecular aliphatic epoxy was also used, to decrease the viscosity of the composite. The AC electrical breakdown strength was estimated in sphere-to-sphere electrodes, and the electrical breakdown data were estimated by Weibull statistical analysis. The electrical breakdown strength became higher with the addition of mica; and that of the system with 20 wt% mica was highest. The electrical breakdown strength of the system with an aliphatic epoxy was higher than that of the system with a, plasticizer.

• Journal of the Korean Ceramic Society
• /
• v.24 no.3
• /
• pp.215-222
• /
• 1987

${\alpha}$-Ferric Hydrous Oxide and ${\alpha}$-Ferric Oxide were obtained as following processes that Ferric Nitrate solution was adjusted to pH 6-8 with Ammonium Hydroxide, refluxed the Iron precipitate for 1 hr. at 80$^{\circ}C$, washed it with water and Methanol (95%), dried it to obtain ${\alpha}$-Ferric Hydrous Oxide at 60$^{\circ}C$, and then heated in atmosphere to prepare ${\alpha}$-Ferric Oxide for 1 hr. at 450$^{\circ}C$. Mica particles cleaned with ultrasonicator (45KHz) in water were mixed with Ferric Nitrate solution and treated it to adsorb ${\alpha}$-Ferric Oxide on the surface of mica particles by using the abovementioned processes, but the heated temperature was at 500$^{\circ}C$. The maximum wavelength of reflected light on the surface of mica-${\alpha}$-Ferric Oxide (50%) was appeared at 546nm but -Ferric Oxide free mica only was at 436 nm. The maximum wavelength was shifted to longer when the weight ratios of ${\alpha}$-Ferric Oxide to mica was changed from 1% to 50%.

• Journal of Integrative Natural Science
• /
• v.3 no.2
• /
• pp.96-102
• /
• 2010

It is still controversial where the improved stability of n-octadecyltriethoxysilane self-assembled monolayer (OTE SAM) on plasma-pretreated mica surface exactly originates from. To date, it has been well known that the extensive cross-polymerization between silane headgroups is a crucial factor for the outstanding mechanical strength of the monolayer. However, this study directly observed that the stability comes not only from the cross-links but also, far more importantly, from the direct chemical bonds between silane headgroups and mica surface. To observe this phenomenon, n-octadecyltrichlorosilane monolayers were self-assembled on both untreated and plasma treated mica surfaces, and their adhesion properties at various stress conditions and force profiles in pure water were investigated and compared through the use of the surface forces apparatus technique. It revealed that, in pure water, there is a substantial difference of stability between untreated and plasma treated cases and the plasma treated surface is mechanically much more stable. In particular, the protrusion behavior of the monolayer during contact repetition experiment was always observed in the untreated case, but never in the plasma treated case. It directly demonstrates that the extensive chemical bonds indeed exist between silane head-groups and plasma treated mica surface and dramatically improve the mechanical stability of the OTE monolayer-coated mica substrate.

• Journal of Integrative Natural Science
• /
• v.3 no.2
• /
• pp.89-95
• /
• 2010

It is still controversial where the improved stability of n-octadecyltriethoxysilane self-assembled monolayer (OTE SAM) on plasma-pretreated mica surface exactly originates from. To date, it has been well known that the extensive cross-polymerization between silane head-groups is a crucial factor for the outstanding mechanical strength of the monolayer. However, this study clearly showed that the stability comes not only from the cross-links but also, far more importantly, from the direct chemical bonds between silane headgroups and mica surface. To examine this phenomenon, n-octadecyltrichlorosilane monolayers were self-assembled on both untreated and plasma treated mica surfaces, and their adhesion properties at various physical conditions (relative humidity, high stress, and contact repetition) were investigated and compared through the use of the surface forces apparatus technique. It revealed that, in highly humid conditions (>90%RH), there is a substantial difference of stability between untreated and plasma treated cases and the plasma treated surface is mechanically much more stable. It obviously proves that the extensive chemical bonds indeed exist between silane head-groups and plasma treated mica surface and dramatically improve the mechanical stability of the OTE monolayer-coated mica substrate.

• Korean Journal of Materials Research
• /
• v.17 no.2
• /
• pp.115-120
• /
• 2007

Polycrystalline silicon (poly-Si) thin film transistors (TFTs) might be fabricated on the mica substrate and transferred to a flexible plastic substrate because mica can be easily cleaved into a thin layer. To overcome the adhesion and stress problem between poly-Si film and mica substrate, a buffer layer consisting of $SiO_x/Ta/Ti$ three layers has been developed. The $SiO_x$ layer is for electrical isolation, the Ti layer is for adhesion of $SiO_{x}$ and mica. and Ta is for stress relief between $SiO_x$ and Ti. A TFT was fabricated on the mica substrate by a conventional Si process and was successfully transferred to a plastic substrate.