• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1349-1353
• /
• 2008

Size-segregated mass and ion concentrations of atmospheric aerosols in Cheonan City were measured using a high volume air sampler equipped with a 5-stage cascade impactor and a ion chromatography between March 2006 and April 2007. The mean values of 24-hr average concentrations of TSP, PM10, PM2.5, and PM1 were 61.7, 55.2, 43.7, $33.2{\mu}g/m^3$, respectively. Mass size distributions of atmospheric aerosols were bimodal distributions with a saddle point in $1.5\;{\sim}\;3.0{\mu}m$ range in diameter separating coarse and fine particle modes. Fine particles, PM2.5 were 70.8% of the total mass of aerosols. Major ion components in aerosols were ${NH_{4}}^+$, $Na^+$, $K^+$, $Ca^{2+}$, $Mg^{2+}$ for cations, and ${SO_{4}}^{2-}$, ${NO_{3}}^-$, $Cl^-$ for anions. ion components occupied 37.4% of coarse particles and 46.2% of fine particles in mass.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.spc
• /
• pp.1-3
• /
• 2009

Silver nanoparticles have been used in agricultural practice because of their biocide effect. However, limited information is available for the effect of silver nanoparticles on soil quality. Therefore, the main purpose of this study was to evaluate effect of silver nanoparticle application on soil especially when fertilizer is applied. To simulate potassium fertilizer, potassium chloride was mixed with silver nanoparticles in soil. Concentration of silver and chloride was measured and result showed that concentration of both compounds was decreased at the range of $3.4mg\;kg^{-1}$ and 78-84% respectively after treatment. In addition, analysis of microbial population after treatment showed that microbial population was increased when silver nanoparticles and KCl were mixed. Those results indicated that application of fertilizer has impact on biocide effect of silver nanoparticles in soil.

• Applied Chemistry for Engineering
• /
• v.29 no.4
• /
• pp.369-375
• /
• 2018

Batch experiments were conducted to investigate the effects of operating parameters such as the temperature, initial concentration, contact time and adsorbent dosage on the adsorption of antibiotics amoxicillin (AMX) by waste citrus peel based activated carbon (WCAC). The kinetics and isotherm experiment data can be well described with the pseudo-second order model and the Langmuir isotherm model, respectively. The maximum adsorption capacity of AMX by WCAC calculated from the Langmuir isotherm model was 125 mg/g. The adsorption of AMX by WCAC shows that the film diffusion (external mass transfer) and the intraparticle diffusion occur simultaneously during the adsorption process. The adsorption rate is more influenced by the intraparticle diffusion than that of the external mass transfer as the particle size of WCAC increases, and the intraparticle diffusion is the rate controlling step. The thermodynamic parameters indicated that the adsorption reaction of AMX by WCAC was an endothermic and spontaneous process.

• Journal of Adhesion and Interface
• /
• v.14 no.2
• /
• pp.82-87
• /
• 2013

Preliminary studies on the synthesis of magnetic nanoparticles including nanoporous carbon materials have been done via a direct carbonization process from resol, ferric nitrate and triblock copolymer F127. The results show that the nanoporous magnetite/carbon ($Fe_3O_4$/carbon) with a low $Fe_3O_4$ content (1 wt%) possesses an ordered 2-D hexagonal (p6mm) structure, uniform nanopores (3.6 nm), high surface areas (up to 635 $m^2/g$) and pore volumes (up to 0.48 $cm^3/g$). Magnetite nanoparticles with a small particle size (10.2 nm) were confined in the matrix of amorphous carbon frameworks with superparamagnetic property (7.7 emu/g). The nanoporous magnetite/carbon showed maximum adsorption amount (995 mg/g) of ibuprofen after 24 h at room temperature. The nanoporous magnetite/carbon was separated from solution easily by using a magnet. The nanoporous magnetite/carbon material is a good adsorbent for hydrophobic organic drug molecules, i.e. ibuprofen.

• Korean Journal of Ecology and Environment
• /
• v.41 no.spc
• /
• pp.21-26
• /
• 2008

The in situ incubation experiment was carried out using $^{13}C$ tracer to determine primary productivity and fatty acid production rate in the shallow, eutrophic Shingu reservoir on 4th July. Particulate organic matter (POM) accounted for 76% in suspended particulate matter (SPM), and average concentration of chlorophyll-${\alpha}$ was $89{\mu}g\;L^{-1}$ in the euphotic layer. Total amount of chlorophyll-${\alpha}$ (Chl-${alpha}$), primary productivity and Chl-${alpha}$ specific productivity in euphotic layer were 112 mg Chl-${alpha}m^{-2}$, 3.53 g C $m^{-2}\;d^{-1}$, 32mg C mg Chl-${\alpha}^{-1}\;d^{-1}$, respectively. The fatty acid composition in newly produced organic matter and suspended organic matter didn't show any significant difference, demonstrating that autochthonous organic matter should be a major source of POM pool. In addition, the fatty acids of bacterial origin were increased through extracellular release of newly photosynthesized DOC, and closely coupled with bacterial assimilation. This result suggests that organic carbon should be actively cycled through the microbial loop in Shingu reservoir in summer.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.7
• /
• pp.46-52
• /
• 2006

The effects of surface treatment on the hydrogen storage properties of a $Mg_2Ni$ alloy particle were investigated by the microvoltammetric technique, in which a carbon-filament microelectrode was manipulated to make electrical contact with the particle in a KOH aqueous solution. It was found that the hydrogen storage properties of $Mg_2Ni$ at room temperature were improved by the surface treatment with a nickel plating solution. The sodium salts(sodium phosphate and sodium dihydrogen citrate) contained in the nickel plating solution made the alloy form an amorphous-like state, resulting in an improved hydrogen charge/discharge capacity at room temperature as high as about 150[mAh/g] from the original value of 17[mAh/g]. Potential-step experiment was carried out to determine the apparent chemical diffusion coefficient of hydrogen atom($D_{app}$) in the alloy. Since the alloy particle we used here was a dense, conductive sphere, the spherical diffusion model was employed for data analysis. $D_{app}$ was found to vary the order between $10^{-8}{\sim}10^{-9}[cm^2/s]$ over the course of hydrogenation and dehydrogenation process.

• Korean Journal of Food Science and Technology
• /
• v.42 no.4
• /
• pp.424-430
• /
• 2010

Immuno-modulatory activities of peptides from Asterias amurensis were investigated using a nano-encapsulation process. The molecular weights of the peptides in the range of 5-7 kDa were separated using Sephadex G-75 gel filtration. Eighty-five percent of the nano-particles were in the 300 nm range using dynamic light scattering. The cytotoxicity of the A. amurensis nano-particles against CCD-986sk human dermal fibroblast cells was 11.64% after adding 1.0 mg/mL of the samples, which was lower than that from the control (13.28% collagen). The secretion of $NO^-$ from macrophages was estimated as $40\;{\mu}M$ after adding 1.0 mg/mL of gelatin nano-particles, which was higher than the others. Prostaglandin $E_2$ production from UV-induced human skin cells decreased greatly to 860 pg/mL after adding 1.0 mg/mL of the samples. Confocal microscopy revealed that nano-particles effectively penetrated the cells within 1 hour. From these results, we consider that nano-encapsulation of the peptides from A. amurensis can improve their biological functions.

• Journal of the Korean Chemical Society
• /
• v.58 no.3
• /
• pp.267-276
• /
• 2014

The collection of $PM_{10}$ and $PM_{2.5}$ fine particulate matter samples was made at the 1100 m site of Mt. Halla of Jeju Island, located at the atmospheric boundary layer (ABL) of background area, during the fall of 2012. Their ionic and elemental species were analyzed, in order to investigate the chemical compositions and size distribution characteristics. In $PM_{2.5}$ fine particles ($d_p$ < $2.5{\mu}m$), the concentrations of the secondary formed nss-$SO{_4}^{2-}$, $NH_4{^+}$ and $NO_3{^-}$ species were 4.84, 1.98, and $1.27{\mu}g/m^3$, respectively, showing 58.2% of the total $PM_{2.5}$ mass. On the other hand, their concentrations in $PM_{10-2.5}$ coarse particles (2.5 < $d_p$ < $10{\mu}m$) were 0.63, 0.21 and $1.10{\mu}g/m^3$, respectively, occupying 22.8% of the total $PM_{10-2.5}$ mass. The comparative study of size distribution has resulted that $NH_4{^+}$, nss-$SO{_4}^{2-}$, $K^+$ and $CH_3COO^-$ are mostly existed in fine particles, and $NO_3{^-}$ is distributed in both fine and coarse particles, but $Na^+$, $Cl^-$, $Mg^{2+}$ and nss-$Ca^{2+}$ are rich in coarse particle mode.

• Journal of Wetlands Research
• /
• v.14 no.1
• /
• pp.131-137
• /
• 2012

This study was investigated to characterize the stormwater runoff pollutant materials from the urban area mixed with industrial area. Almost the similar rainfall pattern is shown during the 5 years, and the yearly precipitation was 5.2~6.6 mm. The first flushing effect during the early-stage rainfall-run off was observed in some events. EMC ranges are 19.3~39.9 mg/L for BOD, 45.2~190 mg/L for CODcr, 67.2~351 mg/L for TSS, 3.6~10.3 mg/L for TN, 1.2~2.5 mg/L for TP. Heavy metal are not detected except Zn which is observed at only one event. The particle size was distributed to 10 ${\mu}m$ at the 3% weight volume and the 50% cumulative weight percent was shown at 12 ${\mu}m$.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.46.2-46.2
• /
• 2010

최근 수송기기 및 전자부품산업에서의 성능향상 요구에 따라 경량고강도 비철금속재료의 수요가 증대되고 있다. 특히, 세계적으로 에너지 절약 및 환경 공해 규제가 대폭 강화됨에 따라 자동차, 항공기 등 수송기기의 소재경량화 소재로 낮은 밀도 기계적 가공성이 우수한 마그네슘 합금이 각광을 받고 있다. 그러나 Mg합금은 알루미늄 합금과는 달리 보호성 산화피막이 형성되지 않아 내식성 및 고온강도가 매우 취약하다. 이를 보안하기 위해서 본 연구에서는 마그네슘의 강도 개선을 위한 원소로써 고용강화 원소로 많이 쓰이는 Zn과 입자 미세화로 인한 항복강도를 증가시키는 Mn의 3원계 합금에 고온에서 안정한 Mg2Sn상이 형성되는 Sn을 첨가하여 시효처리에 따른 기계적 특성과 미세조직을 관찰하였다. 실험 이전에 Pandat Program에 의한 열역학적 분석을 바탕으로 Mg-Zn-Mn 및 Mg-Zn-Mn-Sn의 상태도 계산 및 MgZn와 Mg2Sn 석출분율을 예측하였다. 열역학 계산을 통해 도출된 석출온도를 통해 Mg-Zn-Mn 및 Mg-Zn-Mn-Sn 합금의 열처리에 따른 경도 및 미세구조를 관찰하였다. 또한, 기계적 특성을 평가하기 위해 상온 및 고온 인장시험을 실시하였고 XRD, SEM을 이용하여 석출상을 분석하였다.